R 1300 GS

Motorcycle

4 attachments

Top cases

None

Drilling

Original

Luggage Rack

Compatibility

Product code

JPT131WA

Top case not included

Official name

Original Top Case Rack

PIKE TRACKER, TIBET, and CONQUEROR series

Motorcycle

BMW R 1300 GS from 2023 and R 1300 GS Adventure from 2024

Both stated by the LOBOO user manual

Luggage rack required

Original BMW

LOBOO panel: not compatible with luggage racks from other versions

Compatible top cases

P45T, P36T, T36T, and C40T

Mounting points prepared on the plate, from the LOBOO compatibility panel

Features

Type

Top case mounting plate for the original BMW luggage rack

The original luggage rack remains installed

Statement

4 items

Plate, spacers, screws, threadlocker

Package contents

1 plate, 4 spacers, 4 M6x45 screws, 1 threadlocker

Top case not included

Assembly

Mounting points

On the motorcycle’s original luggage rack

No drilling and no permanent modifications

Steps

3

Remove 4 screws, insert the spacers, and secure the plate

Drilling

None

Reversible procedure

Spacers

4 bushings, 30 mm long, with a 16 mm outer diameter and a 6.5 mm bore

They fit into the holes of the original luggage rack in place of the removed screws

Tightening torque

12 N·m on all four M6x45 screws

To be administered in sequence after completing the adjustments

Threadlocker

Including

Item 4 on the list. The torque wrench is not included

Maximum load

The one specified by BMW for the rear subframe

The limit includes the plate, top case, and contents. LOBOO does not specify its own value.

Materials

Material

Not stated by the manufacturer

No LOBOO source lists the material of this plate

Weight

Not stated by the manufacturer

Documentation

Manual

8 languages

Italian included, with installation video

Dati dal manuale d'uso LOBOO JPT131WA. Materiale e peso non sono dichiarati da nessuna fonte.

The rear top case support for the BMW R 1300 GS, in three configurations.

All you need to know before ordering

Technical specifications, equipment, delivery, and warranty: find every detail, verified against official LOBOO documentation, below.

Description Top Case Plate for BMW R 1300 GS and GS Adventure | top case mount on the original luggage rack

This is the mount that lets you install a top case on the R 1300 GS using the original BMW luggage rack: it attaches on top, without drilling or removing anything from the rear section. It is the shortest and least invasive of the three options LOBOO provides for this motorcycle.

The manual specifies it for both the R 1300 GS from 2023 and the R 1300 GS Adventure from 2024. The LOBOO panel states that the plate is compatible only with the original BMW luggage rack: it cannot be mounted on racks from other versions.

Which top cases you can mount

The plate provides mounting points for P45T, P36T, T36T and C40T, in black and silver finishes. P45T and P36T are the PIKE TRACKER aluminum top cases, while the C40T is the top case from the CONQUEROR series. The top case is not included.

What's included

Four items: the plate, four 30 mm spacers (16 mm outer diameter, 6.5 mm hole), four M6 × 45 screws and threadlocker.

How to install it

Three steps, all reversible:

  • Remove the four original screws from the standard luggage rack.
  • Insert the supplied four spacers into their holes.
  • Place the plate and secure it with the included four M6 × 45 screws, tightening them to 12 N·m in sequence and only after completing the adjustments.

The user manual is available in eight languages, including Italian.

The rear load has a limit

LOBOO does not specify its own maximum load for the plate: the limit stated by BMW in the owner's manual applies, and includes the plate, top case and contents. For the CONQUEROR top case, the luggage manual recommends not exceeding 5 kg. It is the highest and rearmost part of the load, so it matters more than the same weight placed in the side cases.

If this isn't enough

Two other solutions are available for the R 1300 GS: the reinforced rear luggage rack, a complete structure that replaces the standard luggage-rack area, and the sliding upper luggage rack, which replaces the original luggage rack with a die-cast structure and a laterally sliding plate. For the Adventure, the alternative is the JP151WPRO luggage rack for the R 1300 GS Adventure.

With the JP131B side-case frames, the plate completes the three-case system on the R 1300 GS. The plate's material and weight are not specified by any LOBOO source, so we do not state them.

After installation, check that the top case does not cover the license plate or rear lights and does not extend beyond the limits set by the Highway Code.

Why choose it
  • Three configurations:plate only, plate plus rear rack, or Floating plate plus rack. Choose based on what you already have on your motorcycle.
  • Steel construction:transfers the weight of the top case to the motorcycle's frame, even when fully loaded.
  • Quick mounting on OEM points:no drilling or adapter brackets.
  • Compatible with six top case codes:P45T, P36T, and T36T, in black or silver finish.
Who is it recommended for

How to choose the configuration:

  • PLATE: if the original rear subframe is fine for you and you only need the base for the top case.
  • PLATE + REAR FRAME: if you want a more rigid structure for heavy loads and long trips.
  • FLOATING PLATE + FRAME: the complete configuration, with a floating type plate.

This page refers to the standard R 1300 GS. For the R 1300 GS Adventure, you need code JP151WPRO, on a separate page: the rear subframe has a different geometry.

Documents and manufacturer

Assembly and notes

  • Fixing on the OEM points of the rear frame, without drilling or permanent modifications.
  • Respect the maximum load on the rear frame indicated by BMW in the motorcycle's manual: the limit includes the plate, frame, and loaded top case.
  • Recheck the tightenings after the first 100-200 km.
  • The top case is not included in any of the configurations.

How does it work, in detail?

Only on the original BMW luggage rack

Only on the original BMW luggage rack

LOBOO specifies that the top case plate can only be mounted on the original BMW luggage rack, on the R 1300 GS from 2023 onward and the R 1300 GS Adventure from 2024 onward: it is not compatible with other versions. The plate forms the top case set or, by adding the side frames, the three-case set.

Which code for which motorcycle

Which code for which motorcycle

In the LOBOO table, the R 1300 GS and the R 1300 GS Adventure have different side frames. The sliding luggage rack is available only for the GS, while the plate for the original luggage rack fits both. LOBOO aluminum cases can only be mounted on LOBOO frames, without damaging the motorcycle.

The top case on the R 1300 GS

The top case on the R 1300 GS

The PIKE TRACKER top case mounted on the R 1300 GS. With the plate on the original luggage rack, simply remove four screws, insert the spacers, and secure the plate.

FAQs

For more information, please see our FAQ.

Which roof rack does it mount on?

Only on the original BMW rear luggage rack for the R 1300 GS and R 1300 GS Adventure. LOBOO specifies that the plate is not compatible with luggage racks from other versions.

Does it also fit the R 1300 GS Adventure?

Yes. The LOBOO manual for the JPT131WA applies to both the R 1300 GS from 2023 onward and the R 1300 GS Adventure from 2024 onward. On both models, it mounts to the original BMW luggage rack.

Which top cases can I mount?

The plate has mounting points prepared for the P45T and P36T from the PIKE TRACKER series, the T36T from the TIBET series, and the C40T from the CONQUEROR series, in black and silver. The top case is not included.

What’s in the package?

Four items: the plate, four 30 mm spacers with a 16 mm outer diameter and a 6.5 mm hole, four M6 × 45 screws, and threadlocker. Tools are not included: a torque wrench is required for tightening.

How is it assembled?

In three steps: remove the four original screws from the standard luggage rack, insert the four spacers into the holes, and secure the plate with the four M6 × 45 screws included in the kit.

What torque should the screws be tightened to?

At 12 N·m. The manual says not to fully tighten immediately: first complete the adjustments, then apply the torque in sequence, with the included threadlocker.

Do you need to drill into or modify the motorcycle?

No. The plate uses the original screw holes of the stock luggage rack. If you remove it one day, reinstall the original screws and the motorcycle returns to how it was.

How much weight can I put in the top case?

LOBOO does not specify a load rating for the plate itself. The limit indicated by BMW applies, including the plate, top case, and contents. For the CONQUEROR top case, the luggage manual recommends not exceeding 5 kg.

What material is it made of, and how much does it weigh?

No LOBOO source states this plate’s material and weight, including the manual. We prefer to say so rather than provide an unsourced figure.

What’s the difference compared with the other two luggage racks for the R 1300 GS?

For the R 1300 GS, LOBOO offers three solutions, each with its own page. This is the simplest: it attaches above the original luggage rack, which remains in place.

The reinforced JP131WB luggage rack is a complete structure with a larger support plate. The sliding JST131WC luggage rack replaces the original one: it is die-cast and has a laterally sliding plate that, according to LOBOO, reduces the top case's effect on handling.

What is the difference compared with the JP151WPRO luggage rack?

The JP151WPRO is the LOBOO luggage rack dedicated to the R 1300 GS Adventure, on a separate page. This plate, on the other hand, does not replace anything: it mounts onto the original luggage rack and works for both the GS and the Adventure.

Can I use it together with the side frames?

Yes. With the JP131B side frames, on a separate page, the plate completes the three-case system for the R 1300 GS.

Is the manual in Italian?

Yes. The user manual is available in eight languages, including Italian, and includes a QR code for the installation video.

Does the top case cover the license plate or lights?

After installation, check that the top case does not cover the license plate or rear lights and does not protrude beyond the limits set by the Highway Code.

Didn't find the answer you were looking for?

Do not hesitate to contact us

Buying guides, technical comparisons, and news on adventure motorcycle accessories

Before choosing

View all

Caricatore bidirezionale LOBOO C36 visto di tre quarti, display LED con tensione e indicatori SLA, LiON, IN, OUT

100 W USB-C charger for motorcycles: how much current it draws from the electrical system and what you can really connect

A 100 W USB-C socket draws at least 8.3 A from a 12 V system, and the 130 W LOBOO C36 draws at least 10.8 A. Charging profiles, 5 A cable, input mode, installation, and stated limits.

Read moreabout 100 W USB-C charger for motorcycles: how much current it draws from the electrical system and what you can really connect

Prototipo della KTM 990 Adventure in curva, vista di tre quarti anteriore con faro e cupolino

KTM 990 Adventure: what is really known, what EICMA 2026 will reveal, and what to do if you have a 790 or 890 Adventure

The KTM 990 Adventure is not official: KTM has only confirmed its presentation at EICMA 2026 on November 3. What is known, what is not, and what to do if you have a 790 or 890 Adventure.

Read moreabout KTM 990 Adventure: what is really known, what EICMA 2026 will reveal, and what to do if you have a 790 or 890 Adventure

Confronto prima e dopo su terra battuta: il cavalletto della BMW R 1300 GS affonda senza piastra e resta in appoggio con la CJC151-CN

BMW GS kickstand plate: which LOBOO code fits your motorcycle

Which kickstand plate does your BMW GS need? LOBOO CJC code table for the R 1300 GS, R 1250 GS, F 900 GS, and F 850 GS, with stated compatibility, prices, and installation.

Read moreabout BMW GS kickstand plate: which LOBOO code fits your motorcycle