Free shipping on orders over €100 · 14-day returns

guide acquistoLOBOOnavigazione moto

Motorcycle smartphone mount: how to choose one with vibration damping, rain protection, and wireless charging

Aggiornato il Motorcycle Accessories News
Moto adventure con valigie in alluminio e smartphone su porta cellulare da manubrio
Updated October 9, 202612 min readSources: Apple, LOBOO, Outplorer, IEC 60529, Highway Code

In brief. A motorcycle smartphone mount should be chosen based on four decisions, in this order: how it dampens vibrations, how it attaches the phone, how it protects it from water, and whether it powers it. The first matters most: Apple states explicitly that vibrations from high-powered motorcycle engines can degrade the optical stabilization and autofocus of iPhones, and advises against mounting them on these motorcycles. A mount with a damper reduces the risk; none eliminates it.

At Endurrad, you'll find three different damping technologies: silicone pads (LOBOO PH02S, from €54), a floating magnetic base (LOBOO PH06, €162), and air suspension or an integrated damper (Outplorer, from €69). The dimensions, tightening torques, and prices shown here are taken from the manufacturers' specifications and manuals, verified on October 9, 2026.

Choose the right mount based on four decisions, not the brand

The phone mount is the accessory you look at most often during a day of travel. If you get one of the four choices below wrong, you'll notice at the first rain or the first stretch of dirt road.

4decisions: damping, mounting, water, power
3anti-vibration technologies in the Endurrad catalog
15 Wmaximum wireless charging of the LOBOO PH02S and PH06
0.5 mmmaximum play between the claws and phone specified by LOBOO

The four questions to ask yourself before buying

  • Damping: does the mount interrupt the vibration path between the handlebar and phone (silicone, magnetic base, air suspension), or is it rigid?
  • Mounting: snap-on mechanical claws, a screw clamp, or a dedicated case with a quick-release fitting? This determines what happens when you hit a pothole badly.
  • Water: is the phone's own resistance enough, or do you need a waterproof case? What matters is the stated IP rating, not the word «waterproof».
  • Power: with the navigation running for hours, you need to recharge. Wireless, via cable, or not at all - and from which motorcycle outlet.
Smartphone with navigation active, attached to an Outplorer phone mount on a motorcycle's handlebar
Navigating on a phone with an Outplorer QM02 handlebar phone mount.

Vibrations damage the camera, not the mount

A rigid mount doesn't fall: it transmits. When damage occurs, it's inside the phone and often isn't visible until you open the camera.

What Apple says, verbatim

In its support note on vibration, Apple explains that high-power or high-displacement motorcycle engines generate intense, high-amplitude vibrations that are transmitted to the frame and handlebar. Prolonged exposure can degrade two systems: optical image stabilization (OIS), present since the iPhone 6 Plus, 6s Plus, iPhone 7 and later models, and closed-loop autofocus, present from the iPhone XS onward.

There are two recommendations: connecting an iPhone to motorcycles with high-power or high-displacement engines is discouraged; with electric or low-displacement vehicles, such as mopeds and scooters, use an anti-vibration mount and avoid prolonged, regular use in any case.

How to interpret the data. The note is from Apple, but the principle applies to any smartphone with a stabilized camera: OIS and closed-loop autofocus are suspended moving mechanisms with magnetic sensors. No mount manufacturer claims to eliminate vibration. LOBOO states this explicitly: the system attenuates vibration; it does not eliminate it.

Three damping methods, three different behaviors

Technology How it works Endurrad products Strength Limitation
Multilayer silicone pads Three layers of silicone (main, central, and lower) interrupt direct contact between the handlebar and phone LOBOO PH02S Simple structure, with no part that oscillates significantly: the screen remains readable On twin-cylinder and large single-cylinder engines at low revs, some vibration gets through (as stated by LOBOO)
Floating magnetic base The phone holder module "floats" on a magnetic base: greater oscillation amplitude, lower transmitted intensity LOBOO PH06 The greatest margin on rough surfaces, according to LOBOO Must not be mounted horizontally or upside down (LOBOO manual)
Air suspension / integrated damper Air chamber on three axes (Air Suspension series) or damper in the mount (Quick Launch series) Outplorer P100, H1000, PH10, QM01–QM07 Modular system: the same mount attaches to the handlebar, mirror, clutch lever, or brake reservoir Quick Launch versions require a dedicated case or adhesive interface
LOBOO PH06 smartphone mount with anti-vibration magnetic base and snap-on claws
LOBOO PH06: the phone holder module rests on an anti-vibration magnetic base.

The mount determines whether the phone stays on the motorcycle after hitting a pothole

Phone dimensions must be measured with the case fitted. This is the most common mistake: the "bare" phone fits, but the one with a reinforced case does not.

Mechanical snap-on claws (LOBOO)
  • Insert from above; the upper claw clicks into place, and you unlock it with the PUSH button
  • Works with almost all phones within the size limits, without a dedicated case
  • Can be operated with winter gloves
What it does not do
  • It does not tolerate poorly adjusted side slides: LOBOO specifies a maximum play of 0.5 mm
  • Needs to be readjusted every time you change your phone or case
Dedicated case with quick-release mount (Outplorer Quick Launch)
  • 360° magnetic attachment with safety lock (Safety Lock)
  • Clean phone, no marks on the edge and unobstructed buttons
  • QU01 adhesive interface for models without a PRO case
What it does not do
  • If you change phones, you change the case (€29 for the PRO)
  • The PRO case is available only for iPhone 14–17/Air and Samsung Galaxy S23–S25
Mount Phone width (with case) Length Max. thickness Source
LOBOO PH02S 65–98 mm 125–170 mm 13 mm LOBOO data sheet
LOBOO PH06 65–92 mm 125–169 mm 12.5 mm LOBOO manual
Outplorer P100-A (screw clamp) 63–97 mm n/a n/a Outplorer data sheet
Outplorer Quick Launch Depends on the model's PRO case or the QU01 adhesive interface Outplorer data sheet
Large phones. The PH06 has tighter limits than the PH02S: a 6.9-inch phone with a rugged case may exceed 92 mm in width or 12.5 mm in thickness. Measure with calipers before ordering.
LOBOO PH02S smartphone mount with wireless charging mounted on the bar of an adventure motorcycle
LOBOO PH02S with charging module, installed on an adventure motorcycle.

In the rain, the IP rating matters, not the word «waterproof»

An IP68-certified phone withstands water under laboratory conditions. Hours of driving rain at 110 km/h, with the charging cable plugged in, are another matter.

Rating (IEC 60529 standard) What it guarantees What it means on a motorcycle
IPX4 Water splashes from every direction Light, brief rain
IPX5 Water jets (6.3 mm nozzle, 12.5 l/min) Continuous rain, splashes from the wheel
IPX6 Powerful water jets (12.5 mm nozzle, 100 l/min) Heavy rain on the highway, jet washing
IPX7 Temporary immersion up to 1 m for 30 minutes Riding through water or falling into a puddle
IPX8 Continuous immersion beyond 1 m, under conditions specified by the manufacturer The widest margin, but read the manufacturer's conditions

Waterproof case or open mount: the trade-off

The closed case (for example, Outplorer QW01/QW02, rated IPX8, with a Quick Launch mount on the back) protects the phone from water and mud and can be used through the transparent window even when wet. The trade-off is worse heat dissipation: in summer, with the screen at maximum brightness and navigation running, the phone may overheat and reduce brightness or charging.

The open mount keeps the phone cooler and more readable, but relies on the phone's own water resistance. Remember that a smartphone's IP resistance is not permanent and decreases with wear, and that phone manufacturers usually exclude liquid damage from the warranty.

Not declared. LOBOO does not specify an IP rating for the PH02S and PH06 mounts in its manuals or technical data sheets. The old version of this article attributed an IPX6 rating to the PH02: we found no manufacturer source confirming this, so we removed it.
Outplorer QW01 waterproof case with smartphone attached to a motorcycle's handlebar mount
Outplorer QW01 waterproof case (declared IPX8) attached to the handlebar mount.

15 W wireless charging does not always keep up with navigation

GPS active, screen at maximum brightness, and direct sunlight: consumption can exceed what wireless charging supplies. That is why LOBOO mounts also have a USB-C port.

15 WPH02S and PH06 maximum wireless charging
24 WPH02S maximum USB-C PD
36 WPH06 maximum USB-C PD
12–16 Vpower supply from the motorcycle's electrical system

What limits charging on a motorcycle

  • The phone: actual power depends on the protocol it supports. Many phones stop below the mount's maximum.
  • Heat: wireless charging generates heat. At high temperatures, the phone reduces or suspends charging to protect the battery.
  • Objects in between: magnetic rings, metal plates for magnetic mounts, and PopSockets shield the field or trigger foreign-object detection. A thin plastic, rubber, or lightweight leather case is fine.
  • The cable: the 230 mm LOBOO right-angle cable is not included. The USB-C/USB-C version supports 60 W, while the USB-C/Lightning version supports 27 W.
Connection to the electrical system. LOBOO mounts with charging do not have an internal battery. The manual specifies three wires: red to positive, black to ground, yellow to a switched positive (ACC), meaning a 12–15 V wire that turns on with the key and turns off with it. The kit includes a 10 A spare fuse. If you do not know where to connect to switched power, write to us with the motorcycle's model and year.

If your motorcycle already has a USB port and you want to find out how much current a 100 W port can draw from the electrical system, you can find the calculations in the guide to the 100 W USB-C port for motorcycles.

LOBOO PH06 smartphone mount with 15 W wireless charging and USB-C port for fast charging
LOBOO PH06: up to 15 W wireless charging and up to 36 W USB-C PD port.

Where and how to install it: connections, cable, and the three mistakes that make your phone fall

The base cannot be changed after purchase: decide on the mounting point first and measure the tube with calipers.

Mounting point Diameter LOBOO PH02S / PH06 Outplorer For whom
Handlebar 22, 25, 28, 32 mm (bushings included) Handlebar / standard version QM01, QM02 (22–35 mm), P100-C Maxi enduro and naked motorcycles with tubular handlebars
GPS bar above the instruments 12–13 mm 13 mm bar version P100-A (clamp 13–42 mm) Adventure motorcycles with a factory or aftermarket navigation crossbar
Mirror stem up to 10.2 mm Mirror version QM04, QM05, P100-B Scooters and small-displacement motorcycles, crowded cockpits
Steering stem hole 12–25.4 mm Sport version only PH06 n/a Supersport motorcycles with clip-on handlebars

Installing LOBOO, step by step

  1. Position everything without tightening: place the mount, turn the steering to full lock on both sides, and check that the phone and cable do not touch the windscreen, instruments, or levers.
  2. Tighten to the specified torque: M6 handlebar clamp nut 12 N·m (beyond this, the manual warns that the thread may strip); 13 mm bar bracket screws 3 N·m; M6×16 and M6×22 mirror-joint screws 10 N·m.
  3. Adjust the side slides: tighten the screws to 1.5 N·m with threadlocker, keep the slides symmetrical, and maintain clearance around the phone of no more than 0.5 mm.
  4. Secure the cable with slack: on the PH06, the manual calls for 9–11 cm between the cable outlet and the cable clamp to allow free rotation.
  5. Connect the power supply to a switched positive and verify that charging stops when the key is removed.
  6. Test it on the road and recheck the tightness after the first 100 km and periodically: LOBOO asks you to check the screws and the smooth movement of the upper claw, which can stick because of dust and sand.
The three mistakes we see most often. 1) Mounting the PH06 upside down or with the magnetic base horizontal: the manual rules this out. 2) Rotating the charging mount more than one full turn in the same direction: the cable twists and is damaged. 3) Leaving the slides wide «because the claw is on top anyway»: on jumps and intense off-road riding, LOBOO asks you to check that the phone is fully tightened.
Adventure bike with aluminum panniers and smartphone on a handlebar phone holder
Handlebar phone holder on a travel-equipped adventure bike.

Which one to choose: the answer depends on your bike, phone, and trip

There is no single best mount. There is one that provides enough damping for your engine, fits your phone, and mounts at the available point on your bike.

Profile Choice Why
You navigate little, your phone lasts until evening LOBOO PH02S without charging (€54) Same damping and locking as the charging version, no work on the electrical system
Trips with the navigator always on LOBOO PH02S with charging (€81) 15 W induction plus USB-C PD 24 W, phones up to 98 mm wide
Large twin-cylinder, frequent off-road riding, expensive phone LOBOO PH06 (€162) Floating magnetic base, USB-C up to 36 W, geared rotation that does not drift
Multiple bikes, different mounts, frequent rain Outplorer Quick Launch (from €55) + PRO or QW01/QW02 case One mount for the handlebar, mirror, and other points; IPX8 waterproof case when needed
LOBOO PH02SPH02S · 6 configurations
LOBOO PH02S smartphone mount with wireless charging pad and adjustable claws
Damping
Three-level silicone
Charging
15 W wireless + USB-C PD 24 W (charging versions)
Phone
65–98 × 125–170 mm, thickness ≤13 mm
Attachments
Handlebar 22–32 mm · bar 12–13 mm · mirror ≤10.2 mm
Power supply
12–16 V, 8 protections
Price
€54 without charging · €81 with charging
Available with charging, 13 mm bar and mirror attachment · Out of stock handlebar attachment and versions without charging · LOBOO stated specificationSee PH02S
LOBOO PH06PH06 · 4 attachments, all with charging
LOBOO PH06 smartphone mount in black anodized aluminum with anti-vibration magnetic base
Damping
Floating magnetic base + silicone pads
Charging
15 W wireless + 36 W USB-C PD
Phone
65–92 × 125–169 mm, thickness ≤12.5 mm
Attachments
22–32 mm handlebar · 12–13 mm bar · mirror ≤10.2 mm · steering plate 12–25.4 mm
Rotation
Mechanical gears, vertical/horizontal
Price
162 €
Available 13 mm bar and mirror attachment · Out of stock handlebar attachment and sport version · LOBOO stated specificationSee PH06
Outplorer QM02 Quick Launch PROQM02 · 22–35 mm handlebar
Outplorer QM02 handlebar phone mount with collar and Quick Launch attachment
Damping
Integrated anti-vibration damper
Mounting
360° magnetic with Safety Lock
Adjustments
FlexArm, tilt, vertical/horizontal
Also required
PRO phone case (€29) or QU01 interface (€15)
Rain
QW01 case (L) or QW02 (M, up to 6.7"), IPX8, €20
Price
69 €
Available to order Outplorer stated specificationSee QM02

Is it legal to use a smartphone as a navigator?

Yes, if the phone is secured to a mount and you do not handle it while riding. Article 173 of the Highway Code, amended by Law 177/2024 effective December 14, 2024, prohibits using smartphones and devices that require the use of your hands while driving: the fine ranges from €250 to €1,000 with a deduction of 5 points, and repeat offenses within two years result in a higher fine and suspension of the license. Set the route while stationary.

Want to see the entire Outplorer system, component by component? Read the guide to the Outplorer modular system, or browse all anti-vibration motorcycle phone mounts and waterproof phone cases.

Frequently asked questions about motorcycle smartphone mounts

What is the best smartphone mount for motorcycles?
It depends on the engine, phone, and use. For traveling with the navigation always on, you need a mount with a damper and charging, such as the LOBOO PH02S with charging (€81). With a large twin-cylinder engine and lots of off-road riding, the LOBOO PH06 magnetic base (€162) makes sense. If you use multiple motorcycles or want a waterproof case, choose the Outplorer Quick Launch system.
Can the motorcycle’s vibrations damage the smartphone camera?
Yes. Apple explains that vibrations from high-power motorcycle engines can degrade optical image stabilization (present since the iPhone 6 Plus and iPhone 7) and closed-loop autofocus (since the iPhone XS), and advises against mounting an iPhone on these motorcycles. The same principle applies to all phones with stabilized cameras.
Does a vibration-damping mount eliminate the risk completely?
No. It reduces the intensity of the vibrations reaching the phone, but no manufacturer claims to eliminate them entirely. LOBOO explicitly states that on twin-cylinder and large low-revving single-cylinder motorcycles, some residual vibration still reaches the device.
Is an open mount or a waterproof case better?
The waterproof case protects against rain and mud, but retains heat and may reduce touch sensitivity. An open mount keeps the phone cooler and more readable, but relies on its water resistance, which decreases with wear. For trips with variable weather, many people keep the case in their bag and install it when needed.
What does IPX8 mean on a phone case?
According to IEC 60529, IPX8 indicates protection against continuous immersion beyond 1 meter, under conditions declared by the manufacturer and more stringent than IPX7 (1 meter for 30 minutes). On a motorcycle, this means a substantial margin against heavy rain and splashes.
Is wireless charging enough to use the navigator all day?
Not always. With the screen at maximum brightness, GPS active, and direct sunlight, consumption can exceed the induction charger's 15 W, and heat can cause the phone to reduce charging. LOBOO mounts also have a USB-C PD port: 24 W on the PH02S and 36 W on the PH06.
Can I use wireless charging with a magnetic case or a pop socket?
Preferably not. Magnetic rings, metal plates, and pop sockets can shield the field or trigger foreign-object detection. A thin plastic, rubber, or lightweight leather case should not cause problems.
How do you connect a mount with charging to the motorcycle's electrical system?
On LOBOO mounts, connect the red wire to positive, the black wire to ground, and the yellow wire to a switched positive (12–15 V with the ignition on, 0 V with the ignition off). The kit includes a spare 10 A fuse and eight cable ties. Without a switched connection, the mount would remain powered at all times.
Where is it best to mount the support: handlebar, GPS bar, or mirror?
On adventure bikes, a 12–13 mm GPS bar above the instruments places the phone closer to your line of sight. The handlebar is the simplest mounting point. The mirror stem is useful on scooters and crowded cockpits. Before tightening, turn the steering to full lock and check that nothing touches.
What diameter should the tube be for the mount?
LOBOO handlebar versions fit 22, 25, 28, and 32 mm bars with bushings included; bar versions fit 12–13 mm bars; mirror-stem versions fit stems up to 10.2 mm. The Outplorer QM02 fits handlebars from 22 to 35 mm. Measure the tube with calipers at the exact mounting point.
What is the difference between the LOBOO PH02S and PH06?
The PH02S dampens vibrations with three levels of silicone, accepts phones up to 98 mm wide and 13 mm thick, charges at 15 W wirelessly and 24 W via USB-C, and is also available without charging (€54). The PH06 uses a floating magnetic base, has narrower phone limits (92 mm, 12.5 mm), USB-C up to 36 W, geared rotation, and only charging versions (€162).
Is it legal to use a smartphone as a motorcycle navigator?
Yes, if it is secured to a mount and you do not handle it while riding. Article 173 of the Italian Highway Code, as amended by Law 177/2024, penalizes the use of devices that require the hands with a fine of €250 to €1,000 and a 5-point deduction; repeat offenses carry higher penalties and license suspension.
Can the mount remain installed during off-road riding?
LOBOO states that the PH06 is suitable for prolonged use on unpaved roads. For jumps, racing, and intense off-road riding, it asks you to check that the slides grip the phone securely, with play no greater than 0.5 mm, and to periodically recheck the screws.
Why must the PH06 not be mounted upside down or horizontally?
The LOBOO manual rules this out with two explicit warnings: the mount must not be installed upside down, and the anti-vibration magnetic base must not be mounted horizontally. Follow the orientation shown in the installation drawings.
NavigationGPS and smartphone mounts: brackets and compatibility by model SystemOutplorer: the modular motorcycle mount system InstallationHow to install the GPS mount on a motorcycle Electric100 W USB-C socket: how much power does the motorcycle draw AlternativeCarPlay and Android Auto smart displays for motorcycles TabletMotorcycle tablet mount: what you can actually install

Don't know which attachment your motorcycle needs?

Tell us the make, model, and year of your motorcycle and the model of the phone with the case you use: we'll tell you which mount and attachment are right and, if you choose charging, where to find the switched power supply. With the Endurrad app for iPhone, you always have the catalog, availability, and orders in your pocket.

Ask Endurrad
Sources. Apple, support note on high-amplitude vibrations and the iPhone camera system. LOBOO, PH06 manuals (standard, 13 mm, mirror, sport versions) and PH02S/PH06 data sheets. Outplorer, P100-A, QM02, QW01/QW02 product sheets. IEC 60529, IP protection ratings. Italian Highway Code, Art. 173, as amended by Law No. 177 of November 25, 2024 (summary: StudioCataldi). Prices and availability checked on endurrad.com on October 9, 2026. Manufacturer data presented as stated, not measured by Endurrad.
Do you have a question about your motorcycle? We respond Monday to Friday, 8:30 a.m.–5:30 p.m.
Scrivici su WhatsApp

Commenti

Dallo shop Endurrad

Prima di partire: gli accessori che servono sempre

-33%
Endurrad 30L Universal Rear Bags
€80,00 Prezzo di listino €120,00
Consegna in 2-3 giorni lavorativi
-9%
LOBOO LOBOO CP06 portable compressor for motorcycles and cars | 150 PSI, 35 L/min, 294 g 4,0 (1) recensioni
€50,00 Prezzo di listino €55,00
Consegna in 2-3 giorni lavorativi
-9%
LOBOO Tubeless motorcycle tire repair kit with pliers and case
€32,00 Prezzo di listino €35,00
Consegna in 2-3 giorni lavorativi

Dal blog

Altri articoli

Tutti gli articoli
BMW R 12 G/S Sumo: il boxer diventa supermotard. Cosa cambia, quanto costa e se è legale in Italia BMW · 15 min

BMW R 12 G/S Sumo: il boxer diventa supermotard. Cosa cambia, quanto costa e se è legale in Italia

Leggi l'articolo → CFMOTO 1000MT-X: prezzo, scheda tecnica, prova e accessori per viaggiare CFMOTO 1000MT-X · 14 min

CFMOTO 1000MT-X: prezzo, scheda tecnica, prova e accessori per viaggiare

Leggi l'articolo → Ripartire in moto dopo una caduta: paura, tempi e controlli prima di risalire in sella checklist · 17 min

Ripartire in moto dopo una caduta: paura, tempi e controlli prima di risalire in sella

Leggi l'articolo →
{"@context":"http:\/\/schema.org\/","@id":"\/en\/blogs\/news-motorcycle-accessories\/smartphone-holder-for-motorcycles-definitive-guide-to-choosing-the-best#article","@type":"Article","mainEntityOfPage":{"@type":"WebPage","@id":"https:\/\/endurrad.com\/en\/blogs\/news-motorcycle-accessories\/smartphone-holder-for-motorcycles-definitive-guide-to-choosing-the-best"},"articleBody":"\n\n\nUpdated October 9, 202612 min readSources: Apple, LOBOO, Outplorer, IEC 60529, Highway Code\n\n\nIn brief. A motorcycle smartphone mount should be chosen based on four decisions, in this order: how it dampens vibrations, how it attaches the phone, how it protects it from water, and whether it powers it. The first matters most: Apple states explicitly that vibrations from high-powered motorcycle engines can degrade the optical stabilization and autofocus of iPhones, and advises against mounting them on these motorcycles. A mount with a damper reduces the risk; none eliminates it.\nAt Endurrad, you'll find three different damping technologies: silicone pads (LOBOO PH02S, from €54), a floating magnetic base (LOBOO PH06, €162), and air suspension or an integrated damper (Outplorer, from €69). The dimensions, tightening torques, and prices shown here are taken from the manufacturers' specifications and manuals, verified on October 9, 2026.\n\nIn this guide\nThe four decisions\nVibrations and camera\nMounting and phone dimensions\nRain and IP ratings\nWireless and wired charging\nWhere and how to mount it\nWhich one to choose and technical specifications\nFrequently asked questions\n\n\nChoose the right mount based on four decisions, not the brand\nThe phone mount is the accessory you look at most often during a day of travel. If you get one of the four choices below wrong, you'll notice at the first rain or the first stretch of dirt road.\n\n\n4decisions: damping, mounting, water, power\n\n\n3anti-vibration technologies in the Endurrad catalog\n\n\n15 Wmaximum wireless charging of the LOBOO PH02S and PH06\n\n\n0.5 mmmaximum play between the claws and phone specified by LOBOO\n\n\n\nThe four questions to ask yourself before buying\n\n\nDamping: does the mount interrupt the vibration path between the handlebar and phone (silicone, magnetic base, air suspension), or is it rigid?\n\nMounting: snap-on mechanical claws, a screw clamp, or a dedicated case with a quick-release fitting? This determines what happens when you hit a pothole badly.\n\nWater: is the phone's own resistance enough, or do you need a waterproof case? What matters is the stated IP rating, not the word «waterproof».\n\nPower: with the navigation running for hours, you need to recharge. Wireless, via cable, or not at all - and from which motorcycle outlet.\n\n\nNavigating on a phone with an Outplorer QM02 handlebar phone mount.\n\n\nVibrations damage the camera, not the mount\nA rigid mount doesn't fall: it transmits. When damage occurs, it's inside the phone and often isn't visible until you open the camera.\n\nWhat Apple says, verbatim\nIn its support note on vibration, Apple explains that high-power or high-displacement motorcycle engines generate intense, high-amplitude vibrations that are transmitted to the frame and handlebar. Prolonged exposure can degrade two systems: optical image stabilization (OIS), present since the iPhone 6 Plus, 6s Plus, iPhone 7 and later models, and closed-loop autofocus, present from the iPhone XS onward.\nThere are two recommendations: connecting an iPhone to motorcycles with high-power or high-displacement engines is discouraged; with electric or low-displacement vehicles, such as mopeds and scooters, use an anti-vibration mount and avoid prolonged, regular use in any case.\n\n\nHow to interpret the data. The note is from Apple, but the principle applies to any smartphone with a stabilized camera: OIS and closed-loop autofocus are suspended moving mechanisms with magnetic sensors. No mount manufacturer claims to eliminate vibration. LOBOO states this explicitly: the system attenuates vibration; it does not eliminate it.\nThree damping methods, three different behaviors\n\n\nTechnology\nHow it works\nEndurrad products\nStrength\nLimitation\n\n\n\nMultilayer silicone pads\nThree layers of silicone (main, central, and lower) interrupt direct contact between the handlebar and phone\nLOBOO PH02S\nSimple structure, with no part that oscillates significantly: the screen remains readable\nOn twin-cylinder and large single-cylinder engines at low revs, some vibration gets through (as stated by LOBOO)\n\n\nFloating magnetic base\nThe phone holder module \"floats\" on a magnetic base: greater oscillation amplitude, lower transmitted intensity\nLOBOO PH06\nThe greatest margin on rough surfaces, according to LOBOO\nMust not be mounted horizontally or upside down (LOBOO manual)\n\n\nAir suspension \/ integrated damper\nAir chamber on three axes (Air Suspension series) or damper in the mount (Quick Launch series)\nOutplorer P100, H1000, PH10, QM01–QM07\nModular system: the same mount attaches to the handlebar, mirror, clutch lever, or brake reservoir\nQuick Launch versions require a dedicated case or adhesive interface\n\n\n\nLOBOO PH06: the phone holder module rests on an anti-vibration magnetic base.\n\n\nThe mount determines whether the phone stays on the motorcycle after hitting a pothole\nPhone dimensions must be measured with the case fitted. This is the most common mistake: the \"bare\" phone fits, but the one with a reinforced case does not.\n\n\nMechanical snap-on claws (LOBOO)\nInsert from above; the upper claw clicks into place, and you unlock it with the PUSH button\nWorks with almost all phones within the size limits, without a dedicated case\nCan be operated with winter gloves\n\n\n\nWhat it does not do\nIt does not tolerate poorly adjusted side slides: LOBOO specifies a maximum play of 0.5 mm\nNeeds to be readjusted every time you change your phone or case\n\n\n\n\n\nDedicated case with quick-release mount (Outplorer Quick Launch)\n360° magnetic attachment with safety lock (Safety Lock)\nClean phone, no marks on the edge and unobstructed buttons\nQU01 adhesive interface for models without a PRO case\n\n\n\nWhat it does not do\nIf you change phones, you change the case (€29 for the PRO)\nThe PRO case is available only for iPhone 14–17\/Air and Samsung Galaxy S23–S25\n\n\n\n\n\nMount\nPhone width (with case)\nLength\nMax. thickness\nSource\n\n\n\nLOBOO PH02S\n65–98 mm\n125–170 mm\n13 mm\nLOBOO data sheet\n\n\nLOBOO PH06\n65–92 mm\n125–169 mm\n12.5 mm\nLOBOO manual\n\n\nOutplorer P100-A (screw clamp)\n63–97 mm\nn\/a\nn\/a\nOutplorer data sheet\n\n\nOutplorer Quick Launch\nDepends on the model's PRO case or the QU01 adhesive interface\nOutplorer data sheet\n\n\n\n\nLarge phones. The PH06 has tighter limits than the PH02S: a 6.9-inch phone with a rugged case may exceed 92 mm in width or 12.5 mm in thickness. Measure with calipers before ordering.\nLOBOO PH02S with charging module, installed on an adventure motorcycle.\n\n\nIn the rain, the IP rating matters, not the word «waterproof»\nAn IP68-certified phone withstands water under laboratory conditions. Hours of driving rain at 110 km\/h, with the charging cable plugged in, are another matter.\n\n\nRating (IEC 60529 standard)\nWhat it guarantees\nWhat it means on a motorcycle\n\n\n\nIPX4\nWater splashes from every direction\nLight, brief rain\n\n\nIPX5\nWater jets (6.3 mm nozzle, 12.5 l\/min)\nContinuous rain, splashes from the wheel\n\n\nIPX6\nPowerful water jets (12.5 mm nozzle, 100 l\/min)\nHeavy rain on the highway, jet washing\n\n\nIPX7\nTemporary immersion up to 1 m for 30 minutes\nRiding through water or falling into a puddle\n\n\nIPX8\nContinuous immersion beyond 1 m, under conditions specified by the manufacturer\nThe widest margin, but read the manufacturer's conditions\n\n\n\n\nWaterproof case or open mount: the trade-off\nThe closed case (for example, Outplorer QW01\/QW02, rated IPX8, with a Quick Launch mount on the back) protects the phone from water and mud and can be used through the transparent window even when wet. The trade-off is worse heat dissipation: in summer, with the screen at maximum brightness and navigation running, the phone may overheat and reduce brightness or charging.\nThe open mount keeps the phone cooler and more readable, but relies on the phone's own water resistance. Remember that a smartphone's IP resistance is not permanent and decreases with wear, and that phone manufacturers usually exclude liquid damage from the warranty.\n\n\nNot declared. LOBOO does not specify an IP rating for the PH02S and PH06 mounts in its manuals or technical data sheets. The old version of this article attributed an IPX6 rating to the PH02: we found no manufacturer source confirming this, so we removed it.\nOutplorer QW01 waterproof case (declared IPX8) attached to the handlebar mount.\n\n\n15 W wireless charging does not always keep up with navigation\nGPS active, screen at maximum brightness, and direct sunlight: consumption can exceed what wireless charging supplies. That is why LOBOO mounts also have a USB-C port.\n\n\n15 WPH02S and PH06 maximum wireless charging\n\n\n24 WPH02S maximum USB-C PD\n\n\n36 WPH06 maximum USB-C PD\n\n\n12–16 Vpower supply from the motorcycle's electrical system\n\n\n\nWhat limits charging on a motorcycle\n\n\nThe phone: actual power depends on the protocol it supports. Many phones stop below the mount's maximum.\n\nHeat: wireless charging generates heat. At high temperatures, the phone reduces or suspends charging to protect the battery.\n\nObjects in between: magnetic rings, metal plates for magnetic mounts, and PopSockets shield the field or trigger foreign-object detection. A thin plastic, rubber, or lightweight leather case is fine.\n\nThe cable: the 230 mm LOBOO right-angle cable is not included. The USB-C\/USB-C version supports 60 W, while the USB-C\/Lightning version supports 27 W.\n\n\n\nConnection to the electrical system. LOBOO mounts with charging do not have an internal battery. The manual specifies three wires: red to positive, black to ground, yellow to a switched positive (ACC), meaning a 12–15 V wire that turns on with the key and turns off with it. The kit includes a 10 A spare fuse. If you do not know where to connect to switched power, write to us with the motorcycle's model and year.\nIf your motorcycle already has a USB port and you want to find out how much current a 100 W port can draw from the electrical system, you can find the calculations in the guide to the 100 W USB-C port for motorcycles.\nLOBOO PH06: up to 15 W wireless charging and up to 36 W USB-C PD port.\n\n\nWhere and how to install it: connections, cable, and the three mistakes that make your phone fall\nThe base cannot be changed after purchase: decide on the mounting point first and measure the tube with calipers.\n\n\nMounting point\nDiameter\nLOBOO PH02S \/ PH06\nOutplorer\nFor whom\n\n\n\nHandlebar\n22, 25, 28, 32 mm (bushings included)\nHandlebar \/ standard version\nQM01, QM02 (22–35 mm), P100-C\nMaxi enduro and naked motorcycles with tubular handlebars\n\n\nGPS bar above the instruments\n12–13 mm\n13 mm bar version\nP100-A (clamp 13–42 mm)\nAdventure motorcycles with a factory or aftermarket navigation crossbar\n\n\nMirror stem\nup to 10.2 mm\nMirror version\nQM04, QM05, P100-B\nScooters and small-displacement motorcycles, crowded cockpits\n\n\nSteering stem hole\n12–25.4 mm\nSport version only PH06\nn\/a\nSupersport motorcycles with clip-on handlebars\n\n\n\nInstalling LOBOO, step by step\n\n\nPosition everything without tightening: place the mount, turn the steering to full lock on both sides, and check that the phone and cable do not touch the windscreen, instruments, or levers.\n\nTighten to the specified torque: M6 handlebar clamp nut 12 N·m (beyond this, the manual warns that the thread may strip); 13 mm bar bracket screws 3 N·m; M6×16 and M6×22 mirror-joint screws 10 N·m.\n\nAdjust the side slides: tighten the screws to 1.5 N·m with threadlocker, keep the slides symmetrical, and maintain clearance around the phone of no more than 0.5 mm.\n\nSecure the cable with slack: on the PH06, the manual calls for 9–11 cm between the cable outlet and the cable clamp to allow free rotation.\n\nConnect the power supply to a switched positive and verify that charging stops when the key is removed.\n\nTest it on the road and recheck the tightness after the first 100 km and periodically: LOBOO asks you to check the screws and the smooth movement of the upper claw, which can stick because of dust and sand.\n\n\nThe three mistakes we see most often. 1) Mounting the PH06 upside down or with the magnetic base horizontal: the manual rules this out. 2) Rotating the charging mount more than one full turn in the same direction: the cable twists and is damaged. 3) Leaving the slides wide «because the claw is on top anyway»: on jumps and intense off-road riding, LOBOO asks you to check that the phone is fully tightened.\nHandlebar phone holder on a travel-equipped adventure bike.\n\n\nWhich one to choose: the answer depends on your bike, phone, and trip\nThere is no single best mount. There is one that provides enough damping for your engine, fits your phone, and mounts at the available point on your bike.\n\n\nProfile\nChoice\nWhy\n\n\n\nYou navigate little, your phone lasts until evening\nLOBOO PH02S without charging (€54)\nSame damping and locking as the charging version, no work on the electrical system\n\n\nTrips with the navigator always on\nLOBOO PH02S with charging (€81)\n15 W induction plus USB-C PD 24 W, phones up to 98 mm wide\n\n\nLarge twin-cylinder, frequent off-road riding, expensive phone\nLOBOO PH06 (€162)\nFloating magnetic base, USB-C up to 36 W, geared rotation that does not drift\n\n\nMultiple bikes, different mounts, frequent rain\nOutplorer Quick Launch (from €55) + PRO or QW01\/QW02 case\nOne mount for the handlebar, mirror, and other points; IPX8 waterproof case when needed\n\n\n\n\n\nLOBOO PH02SPH02S · 6 configurations\n\n\n\n\n\nDamping\nThree-level silicone\n\n\nCharging\n15 W wireless + USB-C PD 24 W (charging versions)\n\n\nPhone\n65–98 × 125–170 mm, thickness ≤13 mm\n\n\nAttachments\nHandlebar 22–32 mm · bar 12–13 mm · mirror ≤10.2 mm\n\n\nPower supply\n12–16 V, 8 protections\n\n\nPrice\n€54 without charging · €81 with charging\n\n\n\n\nAvailable with charging, 13 mm bar and mirror attachment · Out of stock handlebar attachment and versions without charging · LOBOO stated specificationSee PH02S\n\n\n\n\nLOBOO PH06PH06 · 4 attachments, all with charging\n\n\n\n\n\nDamping\nFloating magnetic base + silicone pads\n\n\nCharging\n15 W wireless + 36 W USB-C PD\n\n\nPhone\n65–92 × 125–169 mm, thickness ≤12.5 mm\n\n\nAttachments\n22–32 mm handlebar · 12–13 mm bar · mirror ≤10.2 mm · steering plate 12–25.4 mm\n\n\nRotation\nMechanical gears, vertical\/horizontal\n\n\nPrice\n162 €\n\n\n\n\nAvailable 13 mm bar and mirror attachment · Out of stock handlebar attachment and sport version · LOBOO stated specificationSee PH06\n\n\n\n\nOutplorer QM02 Quick Launch PROQM02 · 22–35 mm handlebar\n\n\n\n\n\nDamping\nIntegrated anti-vibration damper\n\n\nMounting\n360° magnetic with Safety Lock\n\n\nAdjustments\nFlexArm, tilt, vertical\/horizontal\n\n\nAlso required\nPRO phone case (€29) or QU01 interface (€15)\n\n\nRain\nQW01 case (L) or QW02 (M, up to 6.7\"), IPX8, €20\n\n\nPrice\n69 €\n\n\n\n\nAvailable to order Outplorer stated specificationSee QM02\n\n\n\nIs it legal to use a smartphone as a navigator?\nYes, if the phone is secured to a mount and you do not handle it while riding. Article 173 of the Highway Code, amended by Law 177\/2024 effective December 14, 2024, prohibits using smartphones and devices that require the use of your hands while driving: the fine ranges from €250 to €1,000 with a deduction of 5 points, and repeat offenses within two years result in a higher fine and suspension of the license. Set the route while stationary.\n\nWant to see the entire Outplorer system, component by component? Read the guide to the Outplorer modular system, or browse all anti-vibration motorcycle phone mounts and waterproof phone cases.\n\n\nFrequently asked questions about motorcycle smartphone mounts\nWhat is the best smartphone mount for motorcycles?It depends on the engine, phone, and use. For traveling with the navigation always on, you need a mount with a damper and charging, such as the LOBOO PH02S with charging (€81). With a large twin-cylinder engine and lots of off-road riding, the LOBOO PH06 magnetic base (€162) makes sense. If you use multiple motorcycles or want a waterproof case, choose the Outplorer Quick Launch system.\nCan the motorcycle’s vibrations damage the smartphone camera?Yes. Apple explains that vibrations from high-power motorcycle engines can degrade optical image stabilization (present since the iPhone 6 Plus and iPhone 7) and closed-loop autofocus (since the iPhone XS), and advises against mounting an iPhone on these motorcycles. The same principle applies to all phones with stabilized cameras.\nDoes a vibration-damping mount eliminate the risk completely?No. It reduces the intensity of the vibrations reaching the phone, but no manufacturer claims to eliminate them entirely. LOBOO explicitly states that on twin-cylinder and large low-revving single-cylinder motorcycles, some residual vibration still reaches the device.\nIs an open mount or a waterproof case better?The waterproof case protects against rain and mud, but retains heat and may reduce touch sensitivity. An open mount keeps the phone cooler and more readable, but relies on its water resistance, which decreases with wear. For trips with variable weather, many people keep the case in their bag and install it when needed.\nWhat does IPX8 mean on a phone case?According to IEC 60529, IPX8 indicates protection against continuous immersion beyond 1 meter, under conditions declared by the manufacturer and more stringent than IPX7 (1 meter for 30 minutes). On a motorcycle, this means a substantial margin against heavy rain and splashes.\nIs wireless charging enough to use the navigator all day?Not always. With the screen at maximum brightness, GPS active, and direct sunlight, consumption can exceed the induction charger's 15 W, and heat can cause the phone to reduce charging. LOBOO mounts also have a USB-C PD port: 24 W on the PH02S and 36 W on the PH06.\nCan I use wireless charging with a magnetic case or a pop socket?Preferably not. Magnetic rings, metal plates, and pop sockets can shield the field or trigger foreign-object detection. A thin plastic, rubber, or lightweight leather case should not cause problems.\nHow do you connect a mount with charging to the motorcycle's electrical system?On LOBOO mounts, connect the red wire to positive, the black wire to ground, and the yellow wire to a switched positive (12–15 V with the ignition on, 0 V with the ignition off). The kit includes a spare 10 A fuse and eight cable ties. Without a switched connection, the mount would remain powered at all times.\nWhere is it best to mount the support: handlebar, GPS bar, or mirror?On adventure bikes, a 12–13 mm GPS bar above the instruments places the phone closer to your line of sight. The handlebar is the simplest mounting point. The mirror stem is useful on scooters and crowded cockpits. Before tightening, turn the steering to full lock and check that nothing touches.\nWhat diameter should the tube be for the mount?LOBOO handlebar versions fit 22, 25, 28, and 32 mm bars with bushings included; bar versions fit 12–13 mm bars; mirror-stem versions fit stems up to 10.2 mm. The Outplorer QM02 fits handlebars from 22 to 35 mm. Measure the tube with calipers at the exact mounting point.\nWhat is the difference between the LOBOO PH02S and PH06?The PH02S dampens vibrations with three levels of silicone, accepts phones up to 98 mm wide and 13 mm thick, charges at 15 W wirelessly and 24 W via USB-C, and is also available without charging (€54). The PH06 uses a floating magnetic base, has narrower phone limits (92 mm, 12.5 mm), USB-C up to 36 W, geared rotation, and only charging versions (€162).\nIs it legal to use a smartphone as a motorcycle navigator?Yes, if it is secured to a mount and you do not handle it while riding. Article 173 of the Italian Highway Code, as amended by Law 177\/2024, penalizes the use of devices that require the hands with a fine of €250 to €1,000 and a 5-point deduction; repeat offenses carry higher penalties and license suspension.\nCan the mount remain installed during off-road riding?LOBOO states that the PH06 is suitable for prolonged use on unpaved roads. For jumps, racing, and intense off-road riding, it asks you to check that the slides grip the phone securely, with play no greater than 0.5 mm, and to periodically recheck the screws.\nWhy must the PH06 not be mounted upside down or horizontally?The LOBOO manual rules this out with two explicit warnings: the mount must not be installed upside down, and the anti-vibration magnetic base must not be mounted horizontally. Follow the orientation shown in the installation drawings.\n\n\nNavigationGPS and smartphone mounts: brackets and compatibility by model\nSystemOutplorer: the modular motorcycle mount system\nInstallationHow to install the GPS mount on a motorcycle\nElectric100 W USB-C socket: how much power does the motorcycle draw\nAlternativeCarPlay and Android Auto smart displays for motorcycles\nTabletMotorcycle tablet mount: what you can actually install\n\n\nDon't know which attachment your motorcycle needs?\nTell us the make, model, and year of your motorcycle and the model of the phone with the case you use: we'll tell you which mount and attachment are right and, if you choose charging, where to find the switched power supply. With the Endurrad app for iPhone, you always have the catalog, availability, and orders in your pocket.\nAsk Endurrad\n\n\nSources. Apple, support note on high-amplitude vibrations and the iPhone camera system. LOBOO, PH06 manuals (standard, 13 mm, mirror, sport versions) and PH02S\/PH06 data sheets. Outplorer, P100-A, QM02, QW01\/QW02 product sheets. IEC 60529, IP protection ratings. Italian Highway Code, Art. 173, as amended by Law No. 177 of November 25, 2024 (summary: StudioCataldi). Prices and availability checked on endurrad.com on October 9, 2026. Manufacturer data presented as stated, not measured by Endurrad.\n\n\n","headline":"Motorcycle smartphone mount: how to choose one with vibration damping, rain protection, and wireless charging","description":"How to choose a smartphone mount for motorcycles: vibrations and camera protection according to Apple, phone attachment and dimensions, rain and IP ratings, 15 W wireless or USB-C charging, installation with tightening torques, and a comparison of the LOBOO PH02S, PH06, and Outplorer Quick Launch.","image":"https:\/\/endurrad.com\/cdn\/shop\/articles\/outplorer-qm02-porta-cellulare-moto-manubrio-13_c70dca26-cf07-4d29-8f83-0d6341018d43.jpg?v=1791536800\u0026width=1920","datePublished":"2025-04-16T08:42:34+02:00","dateModified":"2025-04-16T08:42:43+02:00","author":{"@type":"Person","name":"Endurrad"},"publisher":{"@type":"Organization","name":"Endurrad®"}}