450MT

Motorcycle

35 + 30L

Aluminum

20N·m

Tightening torque

6pz

M8 screw

Product

Code

JP591B

Side frame for luggage cases

LOBOO name

Side Case Rack

PIKE TRACKER Series

LOBOO article number

11.6.01591.001.01

EAN

6973227074564

Compatibility

Motorcycle

450MT

CFMOTO since 2024

Other motorcycles

Undeclared

For the 800MT and 800MT-X, LOBOO provides different frames

Compatible suitcases

Aluminum

35 + 30

PIKE TRACKER P35L + P30R, black or silver

Semirigid

WANDERER

Declared by LOBOO for the JP591B

Inflatables

ALPS

23 + 30 L, with mounts and anti-theft device

Other brands

Not compatible

LOBOO suitcases can only be mounted on LOBOO frames

Content

Frames

2

Left and right

Link bar

1

Joins the two frames

Spacers

5

2 Ø 20 × 45 mm, 2 Ø 20 × 42 mm, 1 Ø 25 × 4 mm; Ø 8.5 hole

Years

6

2 M8 × 20, 2 M8 × 60, 2 M8 × 65

Washer

6

M8

Threadlocker

1

To be applied before final tightening

Assembly

Kit screw pair

20

M8 screw

Pair of adjustable hooks

12

With threadlocker

Drilling

None

Original motorcycle points and screws

Material

Frames

Stainless steel

LOBOO statement on the JP591B page

Weight

Undeclared

Maximum load

Undeclared

Dati dichiarati da LOBOO nel manuale di montaggio e sulla pagina del JP591B. Dove il produttore non dichiara un valore lo indichiamo, invece di stimarlo.

La coppia di telai su cui agganciare valigie in alluminio PIKE TRACKER, borse WANDERER o ALPS sulla CFMOTO 450MT.

All you need to know before ordering

Technical specifications, equipment, delivery, and warranty: find every detail, verified against official LOBOO documentation, below.

Description Side Case Racks for CFMOTO 450MT | PIKE TRACKER

Pair of side case racks for the CFMOTO 450MT from 2024 onward, the motorcycle LOBOO identifies in the installation manual. This is the structure onto which the side cases attach: the cases are not included.

LOBOO calls it the Side Case Rack, code JP591B, PIKE TRACKER series. With the aluminum cases, the pair is 35 liters on the left and 30 liters on the right, because the right case is shaped to clear the exhaust.

What you can mount on these racks

  • PIKE TRACKER aluminum cases P35L + P30R, in matte black or glossy silver: find them on the PIKE TRACKER aluminum cases page.
  • WANDERER semi-rigid bags: LOBOO states that the JP591B is compatible with WANDERER side bags. Find them on the WANDERER semi-rigid cases page.
  • ALPS inflatable bags of 23 and 30 liters, with mounts and keyed anti-theft system: find them on the ALPS inflatable cases page.

LOBOO aluminum cases can only be mounted on LOBOO racks. The reverse also applies: hard cases from other manufacturers do not fit these racks.

Will they fit the 800MT or 800MT-X?

No. The JP591B manual only lists the 450MT from 2024 onward. Dedicated listings are available for the other CFMOTO models: side case racks for the CFMOTO 800MT and side case racks for the CFMOTO 800MT-X.

What's included

The manual lists 11 items: left and right racks, a connecting bar, four Ø 20 × Ø 8.5 mm spacers (two 45 mm high and two 42 mm high), one Ø 25 × Ø 8.5 × 4 mm spacer, 2 M8 × 20 screws, 2 M8 × 60 screws, 2 M8 × 65 screws, 6 M8 washers, and threadlocker.

How to install them

Two stages. In the first, remove three original screws, two on the left and one on the right near the exhaust, and install the racks: at the top, use the M8 × 60 and M8 × 65 screws, the 45 and 42 mm spacers, and the washers; at the bottom, use the motorcycle's original screws, with the 4 mm spacer on the left. In the second stage, install the connecting bar at the rear using the two M8 × 20 screws and the washers. The manufacturer does not require drilling.

The kit screws must be tightened to 20 N·m. The rack hooks, which receive the cases, must be adjusted to the correct position and secured with threadlocker at 12 N·m. LOBOO asks you not to fully tighten everything immediately: first put all the parts in position, then apply threadlocker and tighten to the specified torque.

Racks and cases in a single order

If you want the racks and PIKE TRACKER cases together, there is the side case kit for the CFMOTO 450MT, available in black or silver.

Top case and three-case system

For a top case on the 450MT, LOBOO provides the JP601W luggage rack with top case plate, sold separately, which accommodates the PIKE TRACKER aluminum top cases in 36- or 45-liter versions.

LOBOO describes the JP591B as a stainless steel structure. The weight and maximum load of the racks are not stated, so we do not provide them. All other accessories for the CFMOTO 450MT are in the dedicated collection.

Why choose it
  • Fatti per la 450MT: il manuale LOBOO li dichiara per la CFMOTO 450MT dal 2024, senza adattatori.
  • Niente forature: si montano nei punti delle viti originali, con viteria M8 a 20 N·m e frenafiletti nella confezione.
  • Volumi 35 + 30 litri: la valigia destra scavalca lo scarico, quindi a destra c'è meno volume. Il bagaglio più ingombrante va a sinistra.
  • Alluminio, semirigide o gonfiabili sullo stesso telaio: PIKE TRACKER per il bagaglio chiuso a chiave, WANDERER o ALPS quando vuoi borse più leggere.
  • Si completano con il bauletto: aggiungendo il portapacchi JP601W arrivi al sistema a tre valigie.
Who is it recommended for
  • Chi ha una CFMOTO 450MT dal 2024 e vuole valigie laterali LOBOO, in alluminio o morbide.
  • Chi compra il sistema a tappe: prima i telai, poi le valigie o il bauletto, senza rifare la struttura.
  • Chi monta da sé: il manuale è illustrato e la viteria è tutta M8.
  • Non adatto a chi ha la 800MT o la 800MT-X (servono il JP601B o il JP603B) né a chi vuole usare valigie rigide di altre marche.
Documents and manufacturer
  • Manuale di montaggio JP591B: distinta delle parti, vista d'installazione, due fasi di montaggio e coppie di serraggio.
  • Catalogo LOBOO PIKE TRACKER per CFMOTO 450MT: combinazioni di telai, portapacchi e valigie, misure delle valigie.
  • Omologazioni: il produttore non dichiara omologazioni per i telai laterali.
  • Codice della Strada: il carico non deve coprire targa e luci posteriori né sporgere oltre i limiti consentiti.

How does it work in detail

Top case only, side case set, or three cases

Top case only, side case set, or three cases

The LOBOO 450MT comes in three sets: the top case with its luggage rack, the pair of side cases with their frames, or all three cases together.

This listing is for the base of the side case set: the JP591B frames. The cases are added separately.

For the CFMOTO 450MT, only on LOBOO frames

For the CFMOTO 450MT, only on LOBOO frames

In the LOBOO table, the PIKE TRACKER side frame is listed for the CFMOTO 450MT from 2024 onward.

Manufacturer's note: LOBOO aluminum panniers can only be mounted on LOBOO frames and luggage racks, and the frames can be mounted without damaging the motorcycle.

35 on the left, 30 on the right, due to the drainpipe

35 on the left, 30 on the right, due to the drainpipe

The right PIKE TRACKER pannier has a recess that clears the exhaust silencer, with the lower corner angled and covered in technical plastic. For this reason, the right side holds 30 litres and the left 35.

The bulkier luggage goes on the left.

How bulky are the suitcases they hold?

How bulky are the suitcases they hold?

The P35L, on the left, measures 498 × 268 × 408 mm overall and weighs 6 kg. The P30R, on the right, is deeper at the top (244 mm) than at the bottom (208 mm) because it leaves room for the exhaust, and weighs 5.6 kg.

Inside the left one, you have 451 × 227 × 381 mm.

Materials declared by LOBOO

Materials declared by LOBOO

The JP591B LOBOO page describes the frame as a stainless steel structure. The general PIKE TRACKER system specifications list stainless steel and aluminum alloy for the frames, without a breakdown by part.

The cases are made of aluminum alloy, in black or silver.

The 450MT equipped

The 450MT equipped

The official LOBOO photos show the 450MT with black and silver PIKE TRACKER panniers mounted on the side racks.

The top case in the photos is a separate item and requires the JP601W luggage rack.

FAQs

For more information, please see our FAQ.

Which CFMOTO models are the JP591B frames installed on?

LOBOO declares them for the CFMOTO 450MT from 2024 onward. If you're unsure of your motorcycle's year, write to us with the model and year before ordering.

Are they also suitable for the 800MT or the 800MT-X?

No. The JP591B manual only mentions the 450MT. The 800MT has the JP601B frame, and the 800MT-X has the JP603B: each has its own spec sheet.

Are bags included?

No. The package includes the frames, the connecting bar, and the hardware. The cases are purchased separately: PIKE TRACKER aluminum, WANDERER semi-rigid, or ALPS inflatable.

Which aluminum suitcases can I mount?

The PIKE TRACKER P35L on the left and P30R on the right, in matte black or glossy silver. The right one is 30 liters because it has a recess for the exhaust.

Can I install soft bags instead of aluminum cases?

Yes. LOBOO states that the JP591B is compatible with WANDERER semi-rigid panniers, and the 23- and 30-liter ALPS soft panniers also fit the same frames. You do not need to change frames to switch from one type to the other.

Can I use suitcases from other brands?

No. LOBOO aluminum cases can only be mounted on LOBOO racks, and hard cases from other manufacturers are not compatible with these racks.

What's in the package?

Left and right frame, connecting bar, 4 Ø 20 mm spacers (2 45 mm high and 2 42 mm high), 1 Ø 25 × 4 mm spacer, 2 M8 × 20 screws, 2 M8 × 60, 2 M8 × 65, 6 M8 washers and threadlocker, plus the assembly manual.

Should we drill the motorcycle?

No. Some of the original screws indicated in the manual are removed, and the frames are secured at those points, partly with the hardware included in the kit and partly by reinstalling the original screws.

What torque should the screws be tightened to?

20 N·m for the M8 screws in the kit. The adjustable frame hooks are tightened to 12 N·m with threadlocker. First, fit all the pieces without fully tightening them, then apply the specified torque.

Is threadlocker included?

Yes, the threadlocker is included in the package. It should be applied to the screws before final tightening.

How do I add the top case?

For the 450MT, LOBOO offers the luggage rack with JP601W plate, sold separately. The 36- or 45-liter PIKE TRACKER top cases fit on the plate.

What material are the frames made of?

The page for the JP591B LOBOO states that it has a stainless steel structure. The general specifications for the PIKE TRACKER system mention stainless steel and aluminum alloy for the frames, without specifying which part is made of which material.

How much do they weigh, and how much weight can they support?

The manufacturer does not state either the weight of the frames or the maximum load per side, so we do not indicate them. The weights of the empty cases are known: 6 kg for the P35L and 5.6 kg for the P30R.

Can I assemble them myself?

Yes, if you have a torque wrench. The manual is illustrated and has a QR code that links to the assembly video.

Is any inspection needed after assembly?

Yes: LOBOO asks that the fastening screws of all components be checked periodically. Checking them after the first few kilometers and after off-road sections is good practice.

Didn't find the answer you were looking for?

Do not hesitate to contact us

Buying guides, technical comparisons, and news on adventure motorcycle accessories

Before choosing

View all

Prototipo della KTM 990 Adventure in curva, vista di tre quarti anteriore con faro e cupolino

KTM 990 Adventure: what is really known, what EICMA 2026 will reveal, and what to do if you have a 790 or 890 Adventure

The KTM 990 Adventure is not official: KTM has only confirmed its presentation at EICMA 2026 on November 3. What is known, what is not, and what to do if you have a 790 or 890 Adventure.

Read moreabout KTM 990 Adventure: what is really known, what EICMA 2026 will reveal, and what to do if you have a 790 or 890 Adventure

Confronto prima e dopo su terra battuta: il cavalletto della BMW R 1300 GS affonda senza piastra e resta in appoggio con la CJC151-CN

BMW GS kickstand plate: which LOBOO code fits your motorcycle

Which kickstand plate does your BMW GS need? LOBOO CJC code table for the R 1300 GS, R 1250 GS, F 900 GS, and F 850 GS, with stated compatibility, prices, and installation.

Read moreabout BMW GS kickstand plate: which LOBOO code fits your motorcycle

Suzuki V-Strom 800DE con valigie laterali e bauletto in alluminio LOBOO

Suzuki V-Strom 800DE: which panniers and top case to fit, with racks and real prices

On the Suzuki V-Strom 800DE from 2024 onward, LOBOO hard luggage consists of two independent supports: the JP421B side frame and the JP421W plate. A comparison of configurations, capacity in liters, prices, actual stock availability, and installation.

Read moreabout Suzuki V-Strom 800DE: which panniers and top case to fit, with racks and real prices