






Panoramica
In breve
Contrappesi inclusi. Dal 2026 la World Raid passa al BHG-131.
Protezione dagli impatti dichiarata.
Due punti di fissaggio e alluminio trattato termicamente, non un deflettore estetico.
Codice dedicato alla World Raid.
Fino al 2025 questa moto ha un manubrio suo, e il produttore le ha disegnato una struttura sua.
Pensato per stare fuori a lungo.
Su una moto da raid una leva rotta non è un fastidio, è un problema logistico.
Contrappesi già nella scatola.
Nessun acquisto aggiuntivo per chiudere il primo punto di fissaggio.
Quattro plastiche compatibili.
Dalla JET compatta per lo stretto alla STORM per l'inverno, sulla stessa struttura.
Prodotto in Australia.
Barkbusters è un marchio di Rideworx Pty Ltd, che produce paramani dal 1984.
Dal produttore BARKBUSTERS
Leggi la descrizione completa
The BHG-113 is the Barkbusters mounting frame designed for the handlebar of the Yamaha Ténéré 700 World Raid, from 2022 to 2025. It is a two-point mounting kit: the aluminum bar anchors to the internal thread at the end of the handlebar and to a clamp on the straight section, forming a continuous arch around the hand.
The World Raid is built for long stretches away from home: a larger tank, more generous suspension, and raid-range autonomy. It is the kind of bike where a broken lever is not just an inconvenience but a logistical problem. Here, the handguard provides structural protection, while the plastics mounted on it add wind protection during long hours in the saddle.
Good to know before ordering: the protective plastics are not included, while the handlebar weights are included.
Main features
- Two-point mounting: the configuration the manufacturer specifies for impact protection. The single-point setup is intended only for wind and weather protection.
- Heat-treated aluminum bar: the treatment increases strength without adding weight to the structure.
- Handlebar weights included in the package, as stated by the manufacturer.
- Natural aluminum finish, unpainted.
- Four compatible plastic series: JET, VPS, STORM, and CARBON, interchangeable on the same structure.
- Made in Australia by Rideworx Pty Ltd, which has designed handguards since 1984.
Compatibility
| Brand | Model | Years | Code |
|---|---|---|---|
| Yamaha | Ténéré 700 World Raid (XTZ700) | 2022 to 2025 | BHG-113-NP |
If you have a Ténéré 700, check the year and version
| Version | Years | Barkbusters code |
|---|---|---|
| Ténéré 700 (XTZ700) | 2019-2024 | BHG-078 |
| Ténéré 700 (XTZ700) | from 2025 | BHG-131 |
| Ténéré 700 World Raid | 2022-2025 | BHG-113 (this page) |
| Ténéré 700 World Raid | from 2026 | BHG-131 |
Pay attention to the year. The World Raid has its own handlebar through 2025; from 2026 onward, it uses the updated Ténéré 700 handlebar and switches to the BHG-131. This is the easiest mistake to make with this bike, and also the most frustrating, because you only discover the wrong kit once the box is open.
Barkbusters compatibility applies to the motorcycle in its original factory configuration. Write to us with the model and year, and we will check it together.
Protection and use
The wraparound structure protects the brake lever, clutch lever, and switchgear: it withstands impacts and distributes them across the aluminum instead of leaving the lever to take the force. The plastics determine the rest:
- JET — compact profile, with the least bulk in tight sections.
- VPS — two-position adjustable deflector that can be removed in just a few minutes.
- STORM — extended coverage, the choice for long transfers and winter riding.
- CARBON — carbon fiber.
Materials and construction
Heat-treated aluminum bar, dedicated clamps and hardware, and handlebar weights. The manufacturer does not provide weight and dimensions numerically, so we do not estimate them.
Installation
Two instructions from the official manual are worth reading before you begin.
- The reference ring in the clamp. Inside the conical surface of the clamp there is a machined ring: the rings in the two halves must line up and face toward the center of the motorcycle on both sides.
- Heated grips. If you have them installed, the manufacturer states that approximately 3 mm of washers may be needed between the bar end weight and the spacer to ensure clearance from the rotating grip.
- Remove the original handguards, if fitted, and the standard bar end weights.
- Assemble the clamp on the handlebar without tightening it, maintaining the correct ring orientation.
- Attach the aluminum bar to the end of the handlebar and to the clamp connector, positioning it horizontally when viewed from the side.
- Tighten in the order specified by the manufacturer: first the bolt at the handlebar end, then the clamp bolts.
- Fit the plastics you have chosen, align them, and finish tightening.
- Check the throttle, front brake, clutch, and free steering from lock to lock, then recheck the tightening after the first 50 km.
The complete tightening torques are provided in the official Barkbusters instructions supplied with the kit and attached to this product page. The manufacturer considers handguard installation a safety-critical procedure.
What you will find in the package
- Two heat-treated aluminum bars, natural finish
- Clamps and complete hardware
- Handlebar weights
- Installation instructions INS-BHG-113-00-NP
What is NOT included
The protective plastics, which must be ordered separately: JET-003, VPS-203, STORM STM-003, or CARBON BCF-003. EGO plastics are not compatible with this structure.
Why choose Barkbusters
Barkbusters is a brand of Rideworx Pty Ltd, an Australian company that has produced handguards since 1984 and was founded in enduro. It offers three separate codes for the Ténéré 700 family, one for each generation and version: that is why we emphasize the year so strongly on this page.
Why buy it from Endurrad
Endurrad is a shop specializing in accessories for adventure, touring, and enduro motorcycles: the World Raid is exactly the kind of bike we exist for. You will find the Barkbusters range with compatibility checked against the official documentation, code by code, as well as all accessories for the Yamaha Ténéré 700. Free shipping in Italy on orders over €100, returns within 14 days, 1-year warranty.
Nella confezione
Prima di ordinare
Montaggio e requisiti
Come si monta
- Verifica di avere una Ténéré 700 World Raid dal 2022 al 2025, con manubrio originale.
- Rimuovi i paramani originali, se montati, e i contrappesi di serie.
- Assembla il morsetto sul manubrio senza serrare, rispettando l'orientamento degli anelli di riferimento.
- Fissa la barra in alluminio all'estremità del manubrio e al connettore del morsetto, posizionandola orizzontale vista di lato.
- Serra nell'ordine indicato dal produttore: prima il bullone all'estremità del manubrio, poi quelli del morsetto. Con le manopole riscaldate verifica il gioco con la manopola girevole e inserisci le rondelle se serve.
- Verifica gas, freno anteriore, frizione e interruttore di arresto, e che lo sterzo giri liberamente da fondo a fondo. Ricontrolla il serraggio dopo i primi 50 km e dopo ogni caduta.
Istruzioni complete e note di sicurezza
Ti potrebbe servire anche
Prodotti consigliati
If you have any questions, please don’t hesitate to contact us. We’ll get back to you as soon as possible, within 24 hours on business days.
-
Endurrad accessories delivery
For accessories purchased on Endurrad.com, delivery times vary depending on product availability.
Estimated delivery times:
LOBOO, JADO, CHIGEE and Endurrad: delivery within 2-3 business days.
All other brands: delivery within 5 business days.
Made-to-order or temporarily unavailable products: delivery times may vary and are listed on the product page or provided by our customer service team.
As soon as your order is handed over to the courier, you will receive the information needed to track your shipment.
Accessories are carefully inspected and packaged before shipping. When provided by the manufacturer, the package includes manuals, installation instructions, documentation and the accessories required for installation.
For products with special availability or sourcing times, we recommend contacting Endurrad before purchasing to confirm the latest delivery estimate.
-
Customer support
Available to you from Mon. to Fri.
- 08:30 - 13:30
- 14:30 - 17:30
- Saturday and Sunday - Closed
-
Contacts
Frequently asked questions
For more information, see our FAQ of frequently asked questions.



