Kit a punto singolo per Tiger Sport 800 dal 2025: riparo da vento e intemperie, non protezione dagli urti. Plastiche a parte.

Everything you need to know before ordering

Compatibility, included items, installation, and documents: below is every detail verified against the official Barkbusters documentation.

Description Barkbusters BHG-137 handguard mounting kit for Triumph Tiger Sport 800 from 2025, single point, black

The BHG-137-BK is the single-point Barkbusters kit for the Triumph Tiger Sport 800 from 2025 onward, with black aluminum bars. It is the structure onto which Barkbusters plastics are mounted to provide protection from wind, cold, and rain.

Warning: it is not impact protection. Barkbusters clearly distinguishes between the two mounting configurations. The single-point configuration, anchored only at the end of the handlebar, is specified by the manufacturer exclusively for wind and weather protection. For the Tiger Sport 800, Barkbusters does not list a two-point kit.

Key features

  • Black aluminum bars, one right and one left.
  • Single-point mounting, with one bolt per side at the end of the handlebar.
  • Accepts the JET-003, VPS-003, STM-003, and BCF-003 plastics, sold separately.
  • Quick installation, with no clamps on the bar and no drilling.
  • Bolts with threadlocker already applied.

Protection and use

With the plastics installed, the BHG-137 protects your hands from air, cold, and rain during transfers and in the colder season: it is a touring and everyday-use solution. It is not designed to withstand a fall: anyone looking for lever protection in the event of an impact should know this before purchasing.

Materials and construction

Aluminum bars (manufacturer code BAR-BV023) in the black BK version. The manufacturer does not state the kit's weight, so we do not report it.

Compatibility

Make Model Years Barkbusters code
Triumph Tiger Sport 800 from 2025 onward BHG-137-BK

Barkbusters states this compatibility for motorcycles in original factory configuration. It should not be confused with earlier Tiger 800 models, which use a different code. On aftermarket handlebars, the thread at the bar end may differ: verify the mounting before purchasing.

Installation

Remove the original handguards, if fitted, and the stock bar-end weights. Insert the bolt through the bar and the bar-end insert, then screw it into the end of the handlebar, with the bar preferably horizontal when viewed from the side. Stated torque: 10 Nm. The bolt has threadlocker already applied; the manufacturer recommends checking the torque after the first 50 km and leaving approximately 3 mm of clearance between the throttle grip and the handguard.

What you find in the package

  • 2 black aluminum bars, one right and one left
  • 2 bar-end inserts
  • 2 M6x30 countersunk bolts with threadlocker already applied
  • Official INS-BHG-137 instructions

What is NOT included

  • Protection plastics. Without the plastics, the kit does not provide wind protection: choose from the options specified by the manufacturer.
  • Tools.

Plastics to pair with it

  • VPS-003: adjustable deflector with two positions, for touring. It is being phased out, and the price list indicates the VPS-203 as its replacement.
  • STM-003, STORM series: more extensive coverage for the colder months.
  • JET-003: compact profile.
  • BCF-003, CARBON series: made of carbon fiber.

Why choose Barkbusters

Barkbusters is an Australian brand owned by Rideworx Pty Ltd, specializing in motorcycle handguards. Each specific kit is designed around the geometry of a particular handlebar, with published instructions specifying the hardware and torque settings, and the manufacturer clearly states what each configuration protects against. The structure and plastics remain separate: you can change the plastics series or color without touching the kit.

Why buy it from Endurrad

On Endurrad, every Barkbusters product page states the exact code, the years covered, what is in the box, and the type of protection provided, with the official instructions available to download before purchase. You can find the full range in the Barkbusters collection.

Why choose it
  • L'unico kit Barkbusters per la Tiger Sport 800: per questa moto il produttore dichiara solo il punto singolo.
  • Riparo da vento, freddo e pioggia con le plastiche VPS o STORM, pensate per il viaggio e la stagione fredda.
  • Montaggio in pochi minuti: una vite per lato, già con frenafiletti, senza morsetti né forature.
  • Barre nere che si abbinano alla moto.
  • Plastiche intercambiabili: si cambia serie o colore senza toccare il kit.
Who is it recommended for

A chi usa la Tiger Sport 800 per il turismo e tutti i giorni e vuole mani riparate da aria, freddo e pioggia, soprattutto nei mesi freddi.

Non è adatto a chi cerca protezione per le leve in caso di caduta: il punto singolo non è progettato per reggere un urto.

Assembly and documents

Sequenza dichiarata da Barkbusters nel PDF INS-BHG-137. Il montaggio è illustrato per il lato destro e va ripetuto a sinistra.

  1. Rimuovi i paramani originali, se presenti, e i contrappesi di serie.
  2. Infila la vite M6x30 nell'estremità della barra e nel terminale.
  3. Avvitala nell'estremità del manubrio, con la barra preferibilmente orizzontale vista di lato.
  4. Serra a 10 Nm. La vite ha già il frenafiletti applicato.

Controlli finali: circa 3 mm di gioco fra manopola del gas e paramano, verifica di gas, freno, frizione e interruttore di spegnimento, controllo del serraggio dopo i primi 50 km. Il produttore raccomanda il montaggio in officina.

Manufacturer

Barkbusters è un marchio di Rideworx Pty Ltd, Australia, specializzato in paramani per moto.

Documento ufficiale: istruzioni di montaggio INS-BHG-137, scaricabili da questa scheda.

FAQs

For more information, see our FAQ of frequently asked questions.

Didn’t find the answer you were looking for?

Don't hesitate to contact us

Buying guides, technical comparisons, and news about accessories for adventure motorcycles

Before choosing

View all

Honda XL750 Transalp 2026 in azione

Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

From 2026, the Honda XL750 Transalp comes with the E-Clutch as standard on both versions, full-power and A2, at the same price of €10,990. Official technical specifications, what really changes, and how to equip it for touring with Endurrad catalog accessories.

Read moreabout Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

Maxi enduro con numero di gara su una strada bianca dell'Appennino tra boschi autunnali durante il Transitalia Marathon

Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle

From September 25 to October 1, 2026, from Rimini to Termoli in four stages and over 1,000 km: dates, route, Complex, Plain and Road tracks, costs, permitted motorcycles, luggage rules, and a complete checklist for preparing the maxi enduro.

Read moreabout Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle

Coppia di riser manubrio LOBOO montati su BMW R 1300 GS, finitura anodizzata argento

Motorcycle handlebar risers: which height should you choose for your bike?

Rise or setback? The complete range of LOBOO handlebar risers for BMW GS, KTM, Honda, Triumph, and other adventure bikes: stated measurements, real prices, and the check you should always perform after installation.

Read moreabout Motorcycle handlebar risers: which height should you choose for your bike?