Kit a punto singolo per CFMoto 675NK dal 2025: riparo da vento e intemperie, non protezione dagli urti. Plastiche a parte.

Everything you need to know before ordering

Compatibility, included items, installation, and documents: below is every detail verified against the official Barkbusters documentation.

Description Barkbusters BHG-145 handguard mounting kit for CFMoto 675NK from 2025, single-point, black

The BHG-145-BK is the single-mount Barkbusters kit for the CFMoto 675NK from 2025 onward, with black aluminum bars. It is the structure onto which Barkbusters plastics are mounted to provide protection from wind, cold, and rain.

Warning: this is not impact protection. Barkbusters clearly distinguishes between the two mounting configurations. The single-mount configuration, anchored only at the end of the handlebar, is indicated by the manufacturer exclusively for wind and weather protection. For the 675NK, Barkbusters does not list a two-point kit.

Main features

  • Black aluminum bars, one right and one left.
  • Single-mount attachment to a threaded insert screwed into the end of the handlebar.
  • Compatible with the JET-003, VPS-003, STM-003, and BCF-003 plastics, sold separately.
  • Bolts with threadlocker already applied; no clamp on the bar.

Protection and use

With the plastics installed, the BHG-145 protects the hands from air, cold, and rain on the 675NK, during journeys and in cold weather. It is not designed to withstand a crash: anyone seeking lever protection in the event of an impact should know this before purchasing.

Materials and construction

Aluminum bars (manufacturer code BAR-BV023) in the black BK version, with BESF2 threaded inserts. The manufacturer does not state the kit's weight, so we do not list it.

Compatibility

Make Model Years Barkbusters code
CFMoto 675NK from 2025 onward BHG-145-BK

Barkbusters states this compatibility for motorcycles in original factory configuration. Aftermarket handlebars have a different end: the mounting must be checked before purchase.

Installation

Remove the original handguards, if fitted, and the standard bar-end weights. Screw the threaded insert into the end of the handlebar (specified torque: 21 Nm), then insert the M8 bolt through the bar, end piece, and washers and tighten it into the insert, with the bar preferably horizontal when viewed from the side. The bolt already has threadlocker applied.

M8 bolt torque: the manufacturer's instructions do not match: the text specifies 20 Nm, while the torque table specifies 28 Nm. Follow the sheet included in the package and, if in doubt, contact us. Leave approximately 3 mm of clearance between the throttle grip and handguard; recheck the tightening after the first 50 km.

What you find in the package

  • 2 black aluminum bars, one right and one left
  • 2 threaded inserts for the handlebar ends
  • 2 end pieces and 4 M8 washers
  • 2 M8x40 countersunk-head bolts with threadlocker already applied
  • Official INS-BHG-145 instructions

What is NOT included

  • Protective plastics. Without the plastics, the kit offers no wind protection: choose from the options listed by the manufacturer.
  • Tools.

Plastics to pair with it

  • VPS-003: adjustable deflector with two positions. It is being discontinued, and the price list indicates the VPS-203 as its replacement.
  • STM-003, STORM series: more extensive coverage for the colder months.
  • JET-003: compact profile.
  • BCF-003, CARBON series: made of carbon fiber.

Why choose Barkbusters

Barkbusters is an Australian brand owned by Rideworx Pty Ltd, specializing in motorcycle handguards. Each model-specific kit is designed around the geometry of a specific handlebar, with published instructions specifying the hardware and torque settings, and the manufacturer clearly states what each configuration protects against.

Why buy it from Endurrad

On Endurrad, every Barkbusters product page states the exact code, the years covered, what is in the box, and the type of protection it provides, with the official instructions available for download before purchase. You can find the full range in the Barkbusters collection.

Why choose it
  • L'unico kit Barkbusters per la 675NK: per questa moto il produttore dichiara solo il punto singolo.
  • Riparo da vento, freddo e pioggia con le plastiche VPS o STORM.
  • Nessun morsetto sul tubo: si fissa con un inserto filettato nell'estremità del manubrio.
  • Barre nere che si abbinano a una naked.
  • Plastiche intercambiabili: si cambia serie o colore senza toccare il kit.
Who is it recommended for

A chi usa la CFMoto 675NK tutto l'anno e vuole mani riparate da aria, freddo e pioggia.

Non è adatto a chi cerca protezione per le leve in caso di caduta: il punto singolo non è progettato per reggere un urto.

Assembly and documents

Sequenza dichiarata da Barkbusters nel PDF INS-BHG-145. Il montaggio è illustrato per il lato destro e va ripetuto a sinistra.

  1. Rimuovi i paramani originali, se presenti, e i contrappesi di serie.
  2. Avvita l'inserto filettato nell'estremità del manubrio e serralo a 21 Nm.
  3. Infila la vite M8x40 nella barra, nel terminale e nelle rondelle.
  4. Avvitala nell'inserto con la barra preferibilmente orizzontale vista di lato. La vite ha già il frenafiletti applicato.

Coppia della vite M8: le istruzioni non coincidono, il testo indica 20 Nm e la tabella 28 Nm. Segui il foglio presente nella confezione e, nel dubbio, scrivici. Lascia circa 3 mm di gioco fra manopola del gas e paramano e ricontrolla il serraggio dopo i primi 50 km. Il produttore raccomanda il montaggio in officina.

Manufacturer

Barkbusters è un marchio di Rideworx Pty Ltd, Australia, specializzato in paramani per moto.

Documento ufficiale: istruzioni di montaggio INS-BHG-145, scaricabili da questa scheda.

FAQs

For more information, see our FAQ of frequently asked questions.

Didn’t find the answer you were looking for?

Don't hesitate to contact us

Buying guides, technical comparisons, and news about accessories for adventure motorcycles

Before choosing

View all

Honda XL750 Transalp 2026 in azione

Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

From 2026, the Honda XL750 Transalp comes with the E-Clutch as standard on both versions, full-power and A2, at the same price of €10,990. Official technical specifications, what really changes, and how to equip it for touring with Endurrad catalog accessories.

Read moreabout Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

Maxi enduro con numero di gara su una strada bianca dell'Appennino tra boschi autunnali durante il Transitalia Marathon

Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle

From September 25 to October 1, 2026, from Rimini to Termoli in four stages and over 1,000 km: dates, route, Complex, Plain and Road tracks, costs, permitted motorcycles, luggage rules, and a complete checklist for preparing the maxi enduro.

Read moreabout Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle

Coppia di riser manubrio LOBOO montati su BMW R 1300 GS, finitura anodizzata argento

Motorcycle handlebar risers: which height should you choose for your bike?

Rise or setback? The complete range of LOBOO handlebar risers for BMW GS, KTM, Honda, Triumph, and other adventure bikes: stated measurements, real prices, and the check you should always perform after installation.

Read moreabout Motorcycle handlebar risers: which height should you choose for your bike?