R 1300 GS

Motorcycle

4 attachments

Top cases

None

Drilling

Original

Luggage Rack

Compatibility

Product code

JPT131WA

Top case not included

Official name

Original Top Case Rack

PIKE TRACKER, TIBET, and CONQUEROR series

Motorcycle

BMW R 1300 GS from 2023 and R 1300 GS Adventure from 2024

Both stated by the LOBOO user manual

Compatible top cases

P45T, P36T, T36T, and C40T

Mounting points prepared on the plate, from the LOBOO compatibility panel

Features

Type

Top case mounting plate, attaches to the standard luggage rack

Optional, not mandatory

Package contents

1 plate, 4 spacers, 4 M6x45 screws, 1 assembly wrench

Top case not included

Assembly

Mounting points

On the motorcycle’s original luggage rack

No drilling and no permanent modifications

Spacers

4 bushings, 30 mm long, with a 16 mm outer diameter and a 6.5 mm bore

They fit into the holes of the original luggage rack in place of the removed screws

Tightening torque

12 N·m on all four M6x45 screws

To be administered in sequence after completing the adjustments

Tool included

Assembly key included

Maximum load

The one specified by BMW for the rear subframe

The limit includes the plate, top case, and contents. LOBOO does not specify its own value.

Materials

Material

Not stated by the manufacturer

No LOBOO source lists the material of this plate

Dati dal manuale d'uso LOBOO JPT131WA. Materiale e peso non sono dichiarati da nessuna fonte.

The rear top case support for the BMW R 1300 GS, in three configurations.

All you need to know before ordering

Technical specifications, equipment, delivery, and warranty: find every detail, verified against official LOBOO documentation, below.

Description Top Case Plate for BMW R 1300 GS and GS Adventure | top case mount on the original luggage rack

This is the mounting plate that lets you install a top case on the R 1300 GS using the luggage rack the motorcycle already has: it attaches to the designated mounting points, with no drilling and without removing anything from the tail section. It is the shortest and least invasive of the three solutions LOBOO makes for this motorcycle.

The manual lists it for both the R 1300 GS from 2023 onward and the R 1300 GS Adventure from 2024 onward.

Which top cases you can install

The plate provides mounting points for P45T, P36T, T36T and C40T, in black and silver finishes. The P45T can hold a full-face helmet; the P36T and T36T keep the rear profile more compact; the C40T is the aluminum top case in the CONQUEROR series. The top case is not included.

How to install it

Three steps, all reversible:

  • Remove the four original screws from the standard luggage rack.
  • Insert the supplied four 30 mm spacers into their holes.
  • Place the plate in position and secure it with the included four M6×45 screws, tightening them to 12 N·m in sequence and only after completing the adjustments.

The installation wrench is included in the package. The user manual is in eight languages, including Italian.

The rear load has a limit

LOBOO does not specify a maximum load for the plate itself: the limit stated by BMW in the owner's manual for the rear subframe applies, and includes the plate, top case and contents. This is the highest and rearmost point of the load, so exceeding the limit affects stability much more than placing the same weight in the side cases.

If this is not enough

Two other solutions are available for the same motorcycle, each with its own page: the reinforced rear luggage rack, which replaces the entire standard structure and is intended for those who load the top case to its maximum capacity, and the sliding upper luggage rack, which allows you to adjust the top case position forwards and backwards.

After installation

Check that the top case does not cover the license plate or rear lights and does not extend beyond the limits set by the Highway Code, and check the fasteners again after the first 100–200 km.

The plate material is not specified by any LOBOO source, including the manual: we prefer to say so rather than make the choice ourselves.

Why choose it
  • Three configurations:plate only, plate plus rear rack, or Floating plate plus rack. Choose based on what you already have on your motorcycle.
  • Steel construction:transfers the weight of the top case to the motorcycle's frame, even when fully loaded.
  • Quick mounting on OEM points:no drilling or adapter brackets.
  • Compatible with six top case codes:P45T, P36T, and T36T, in black or silver finish.
Who is it recommended for

How to choose the configuration:

  • PLATE: if the original rear subframe is fine for you and you only need the base for the top case.
  • PLATE + REAR FRAME: if you want a more rigid structure for heavy loads and long trips.
  • FLOATING PLATE + FRAME: the complete configuration, with a floating type plate.

This page refers to the standard R 1300 GS. For the R 1300 GS Adventure, you need code JP151WPRO, on a separate page: the rear subframe has a different geometry.

Documents and manufacturer

Assembly and notes

  • Fixing on the OEM points of the rear frame, without drilling or permanent modifications.
  • Respect the maximum load on the rear frame indicated by BMW in the motorcycle's manual: the limit includes the plate, frame, and loaded top case.
  • Recheck the tightenings after the first 100-200 km.
  • The top case is not included in any of the configurations.

How does it work, in detail?

It is added, not replaced

It is added, not replaced

This plate uses the luggage rack the motorcycle already has: it attaches on top, at the designated mounting points, and becomes the mounting point for the top case. There is nothing to remove from the tail, nothing to drill, and you’re ready to go in ten minutes.

It’s the most straightforward and least invasive of the three solutions LOBOO makes for this motorcycle.

Four mounts, six top cases

Four mounts, six top cases

The plate is set up for the P45T, P36T, T36T, and C40T mounts, giving you access to the range’s six top-case codes in black or silver.

The P45T fits a full-face helmet inside the top case, while the P36T and T36T keep the rear end more compact.

When it's needed most

When it's needed most

If you load the top case to its maximum capacity and do so frequently, the original luggage rack becomes the limiting factor. In that case, LOBOO makes a reinforced luggage rack that replaces it with its own structure: it costs more and requires a lengthy installation, but the load no longer passes through the stock plastic.

It has its own page: if that's how you use it, check that out before getting this plate.

And if you want to move the top case

And if you want to move the top case

For the R 1300 GS, there is also a sliding luggage rack with a platform adjustable forward and backward: move the top case toward the center when riding alone, or farther back when carrying a passenger.

That one has its own page too, and it mounts using the motorcycle’s original screws.

The rear load has a specific limit.

The rear load has a specific limit.

BMW specifies a maximum load on the rear subframe: this includes the mounting plate, top case, and contents.

It is the highest and rearmost point of the load: exceeding it affects stability more than the same weight in the side cases.

License plate and lights must remain visible

License plate and lights must remain visible

After installation, check that the top case does not cover the license plate or rear lights and does not extend beyond the limits established by the Highway Code.

Recheck the fasteners after the first 100–200 km: the rear rack flexes significantly when carrying a moving load.

FAQs

For more information, please see our FAQ.

What’s the difference compared with the other two luggage racks for the R 1300 GS?

For the R 1300 GS, LOBOO offers three different solutions, each with its own page. This is the simplest one: it attaches on top of the original luggage rack, which remains in place.

The reinforced luggage rack replaces the entire rear structure and is intended for those who load the top case to its maximum capacity. The sliding upper luggage rack replaces the original one and allows you to adjust the top case position forward and backward.

Does it also fit the R 1300 GS Adventure?

No. The R 1300 GS Adventure has a different rear subframe and requires code JP151WPRO, available on a separate page. This page concerns the codes in the 131 series, intended for the standard R 1300 GS.

Is the product covered by a warranty?

Yes: all LOBOO products sold on Endurrad are covered by the 24-month statutory consumer warranty. In the event of a lack of conformity, we will handle the claim with the manufacturer.

Can I return the product if it isn’t suitable?

Yes, you are entitled to return the item within 14 days of delivery under online purchase regulations. The product must be intact and in its original packaging: contact us and we’ll guide you through the process.

How does shipping work?

Tracked shipping throughout Italy: the product is carefully inspected and prepared before leaving our warehouse. The mounting accessories included in the original package are included.

Can I pay in installments?

Yes: at checkout, installment payment services are available directly among the payment methods, with no additional paperwork.

Is it an original LOBOO product?

Yes: we sell exclusively original LOBOO products, new and in the packaging provided by the manufacturer, with official documentation.

Didn't find the answer you were looking for?

Do not hesitate to contact us

Buying guides, technical comparisons, and news on adventure motorcycle accessories

Before choosing

View all

Honda XL750 Transalp 2026 in azione

Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

From 2026, the Honda XL750 Transalp comes with the E-Clutch as standard on both versions, full-power and A2, at the same price of €10,990. Official technical specifications, what really changes, and how to equip it for touring with Endurrad catalog accessories.

Read moreabout Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

Maxi enduro con numero di gara su una strada bianca dell'Appennino tra boschi autunnali durante il Transitalia Marathon

Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle

From September 25 to October 1, 2026, from Rimini to Termoli in four stages and over 1,000 km: dates, route, Complex, Plain and Road tracks, costs, permitted motorcycles, luggage rules, and a complete checklist for preparing the maxi enduro.

Read moreabout Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle

Coppia di riser manubrio LOBOO montati su BMW R 1300 GS, finitura anodizzata argento

Motorcycle handlebar risers: which height should you choose for your bike?

Rise or setback? The complete range of LOBOO handlebar risers for BMW GS, KTM, Honda, Triumph, and other adventure bikes: stated measurements, real prices, and the check you should always perform after installation.

Read moreabout Motorcycle handlebar risers: which height should you choose for your bike?