The B-051 is the complete clamp that Barkbusters uses on its handguard structures for straight 22 mm handlebars. It is sold separately, with its half-shell and hardware, to replace a damaged part without having to replace the entire kit.

It is a single part

The manufacturer states this explicitly, and it is worth repeating before purchase: the package contains just one clamp. If you need to rebuild both sides of the motorcycle, the quantity to order is two.

When you need it

There are two typical situations. After a fall, when the clamp takes the impact instead of the lever: that is exactly what it is designed to do, but it must then be replaced. Or when completing a used handguard structure or one that is missing a part, while the rest - bars, connectors, plastics - is still in good condition.

The detail you appreciate during installation

The clamp body has a recess for the self-locking nut: as soon as the bolt starts tightening, the nut locks into place by itself. You do not need a second wrench to hold it still, and on a handlebar full of cables, that is the difference between five minutes and twenty.

What you will find in the package

• One complete clamp with CS-STD half-shell.
• Two M6 Allen bolts, one M6 self-locking nut, and one M8 button-head bolt.
• Official installation instructions.

Compatibility

Straight 22 mm handlebar section, the classic 7/8 inch size. It is not suitable for tapered handlebars or 28.5 mm handlebars.

If you need something else instead

• The complete clamp kit for starting from scratch is the BSC-STD.
• For 28.5 mm handlebars, there is the BTC-00; for tapered handlebars, the BTC-06.

Why buy it from Endurrad

Free shipping in Italy on orders over €100 and in Europe on orders over €250, returns within 14 days, and support in Italian. If you are not sure which part is missing, send us a photo of the structure: it is the quickest way to order the right one.