LOBOO Handlebar Riser for KTM Adventure and Husqvarna | 19 mm Rise · Black or Silver

The official LOBOO page lists the KTM 390 Adventure, 690 Enduro, 790 Adventure and Adventure R, 890 Adventure and Adventure R, 1050, 1090 and 1190 Adventure, 1290 Super Adventure R and S, and Husqvarna Norden 901 and FE 350.

The manufacturer specifies universal compatibility with 28 mm handlebars. Our distributor’s price list does not include the 390 Adventure: if you have that model, write to us before ordering and we will check it together.

Nineteen millimeters, according to the LOBOO technical panel. It is a fixed measurement: there are no variants with different risers, nor any adjustments after installation.

This part only raises the handlebars; it does not move them toward the rider.

They may sound small, but they land in exactly the right spot: they change the angle at which your arms reach the grips, and that is the angle that determines how much your shoulders close in.

If you’re looking for a more substantial rise for a much more upright position, this isn’t the right part: the rise is deliberately modest so as not to affect the controls and wiring.

LOBOO chose 19 mm for precisely this reason: it stays within the available slack of the original cables, providing greater comfort without requiring longer brake lines or extensions.

However, the manufacturer specifies that this applies to most models, not all. With the motorcycle stationary, turn the handlebars fully to both sides and check that nothing pulls, catches, or rubs: if anything is under tension, the routing must be revised before riding again.

The two risers come in the box. LOBOO does not publish a detailed parts list for this code, and we prefer to tell you that rather than list undocumented components.

For this type of installation, the motorcycle’s original hardware is normally reused. If you would like confirmation before ordering, write to us and we will ask the distributor.

For the pair: you receive both risers, which is everything needed for the entire handlebar.

Aesthetic only: the riser is the same; only the finish differs. The black blends in with the dark components of KTM Adventure and Husqvarna bikes, while the silver matches the tone of the exposed triple clamps.

Both versions cost the same: choose the color from the selector above.

It’s within reach of anyone with a torque wrench and basic mechanical skills: remove the handlebar’s upper clamps, insert the risers, and tighten everything back up.

A torque wrench is genuinely necessary because these are the bolts securing the handlebar. LOBOO does not publish torque values for this part number, so follow those specified by the motorcycle manufacturer. Without the proper tool, it’s best to use a workshop.

Yes: this riser only raises the handlebar; it does not move it back toward the tank, so the available space is not reduced.

If you use a handlebar-mounted navigation holder, after installation check that it does not contact the fairing or windshield when the handlebars are turned fully.

Yes. The risers do not replace the handlebar: they take the place of the clamps and reposition the one you already have. The controls, grips, bar ends, and handguards remain where they are.

Standing on the footpegs gives you more leverage on the handlebars, so your body doesn’t have to lean forward: on dirt roads, that’s the difference between working with the bike and chasing it. During slow maneuvers, the sense of control is more immediate.

This is not a modification to the chassis: the geometry, suspension, and braking system remain as original.

LOBOO does not publish the weight for this code, and we prefer to tell you that rather than estimate it. In any case, these are two aluminum blocks just a few centimeters long: the increase compared with the original clamps is on the order of a few dozen grams.

Yes. LOBOO states that the installation is non-destructive: it uses the existing mounting points, with no drilling or permanent modifications. The original clamps are reinstalled, and the motorcycle returns to its original condition.