65L

Total volume

10kg

Maximum weight per suitcase

11,6kg

Weight of the pair of suitcases

JP661B

Side frames

Capacity

Settings

35+30

Asymmetrical: the right side leaves room for the exhaust pipe

Total volume

65

35 L on the left, 30 L on the right

Kit contents

Side frames

JP661B

Included, in steel

Suitcases

P35L + P30R

Aluminum PIKE TRACKER, top case not included

Compatibility

Motorcycle

KOVE 800 X

Since 2023

For the top case

JPT661W

Top case mounting plate, on a separate page

Dimensions

Left suitcase interior

451 x 227 x 381

Length × depth × height

Left suitcase external dimensions

498 x 268 x 408

Mounted accessories included

Right suitcase interior

451 x 227/167 x 381

The two measurements are the upper part and the lower part.

Right suitcase external dimensions

498 x 244/208 x 408

Mounted accessories included

Closure

Lock

By key

Five-pin tumbler cylinder, removable and replaceable

Water resistance

IP rating

Undeclared

LOBOO claims water and dust resistance without publishing a rating

All you need to know before ordering

Technical specifications, equipment, delivery, and warranty: find every detail, verified against official LOBOO documentation, below.

Description KOVE 800 X Side Cases - Loboo

Complete kit for KOVE 800 X: the pair of JP661B side frames with mounting hardware, plus the two PIKE TRACKER aluminum cases with capacities of 35 and 30 liters, in your chosen finish. One order, nothing else to match.

Why the two sides have different capacities

The right case holds 30 liters instead of 35 because it is shaped around the exhaust: this is the version LOBOO calls exhaust avoidance, with a recessed lower wall. This prevents the motorcycle from becoming wider than necessary on the hot side. The left case, without that constraint, retains its full 35-liter capacity.

How much they hold and how much they can weigh

LOBOO specifies a maximum load of 10 kg per side case. The pair weighs 11.6 kg empty, excluding the frames: 6 kg for the left case and 5.6 kg for the right.

  • Left P35L — internal dimensions 451 x 227 x 381 mm, external dimensions 498 x 268 x 408 mm
  • Right P30R — internal dimensions 451 x 227/167 x 381 mm, external dimensions 498 x 244/208 x 408 mm

The two measurements for the right case refer to the upper and lower sections, where it is recessed to clear the exhaust. These dimensions are stated by the manufacturer based on manual measurements, so some tolerance should be expected.

Construction

  • High-strength aluminum, with the lower corners protected by structural plastic bumpers
  • Key lock with a five-disc cylinder, removable and replaceable without changing the case
  • Scratch-resistant inner lining, fabric pocket in the left lid, and storage net on the right
  • Lid opening stop to prevent it from hitting the frame
  • 3M reflective inserts on the outer side
  • Finishes: glossy silver or matte black

LOBOO states that the series is water- and dust-resistant, but does not publish an IP rating, so we do not include one because it is not a manufacturer-certified specification.

What is not included

The top case and its JPT661W plate are purchased separately. The LR06 LED light with sensor is supplied by LOBOO only with the three-case set, so it is not included in this kit.

Alternatives for the same frames

The JP661B frames also accept the 40+30-liter WANDERER soft cases, if you prefer a lighter solution. If you already have the frames, you can purchase only the cases from the PIKE TRACKER series page. LOBOO cases can only be mounted on LOBOO frames, however: they are not interchangeable with other brands' mounts.

Maintenance

Wash with a water jet held at least one meter away, use a neutral detergent, and dry immediately afterward. Avoid acidic or alkaline products. Make a note of the number stamped on the key: you will need it to have a duplicate made.

Documents and manufacturer

Produttore: Shenzhen LOBOO Motor Accessories Co., Ltd, Shenzhen, Guangdong, Cina. Sito: www.loboo.com.cn

Montaggio e note

  • Il kit comprende telai laterali e coppia di valigie: il top case e la relativa piastra non sono inclusi.
  • Carico massimo dichiarato da LOBOO: 10 kg per valigia laterale.
  • LOBOO dichiara la tenuta all'acqua e alla polvere della serie PIKE TRACKER, ma non pubblica un grado IP.
  • Rispetta il carico massimo per telaio laterale indicato da KOVE nel libretto della moto.
  • Ricontrolla i serraggi dopo i primi 100-200 km e periodicamente con uso off-road.
  • Il carico non deve coprire targa e luci posteriori ne' sporgere oltre i limiti del Codice della Strada.

Key Specifications

  • Quantity: 3 PCS

  • Water resistance: Waterproof IP68

  • Colors: BLACK or SILVER

  • Material: Steel

  • Material: Aluminum

KOVE 800 X LOBOO side cases

Frames and cases in a single order

Frames and cases in a single order

The complete system for the KOVE 800 X: JP661B frames plus a pair of PIKE TRACKER aluminum cases, in your chosen finish. No need to source any parts separately.

The difference in capacity between the two sides is due to the exhaust routing: the narrower right case keeps the motorcycle compact in difficult passages.

Why 35 on the left and 30 on the right?

Why 35 on the left and 30 on the right?

The exhaust runs along the right side of the KOVE 800 X. The narrower pannier leaves the necessary space and prevents the motorcycle from becoming wider on that side.

It is a design choice, not a limitation of the range.

Aluminum, key locks, waterproofness

Aluminum, key locks, waterproofness

The PIKE TRACKER cases are made of high-strength aluminum alloy, with perimeter seals and keyed locks on each case.

It is the most popular series in the LOBOO range: the same case can be mounted on more than fifteen different motorcycles by changing only the frame.

The JP661B frames are included

The JP661B frames are included

You don't need to search for them separately: the steel frame is included in the order and is mounted at the attachment points provided by the manufacturer.

If you already have the frames installed, you can purchase just the cases from the PIKE TRACKER series page.

The top case is a whole different story.

The top case is a whole different story.

This kit covers the side panels. The JPT661W top-case mounting plate is required; it mounts on the rear subframe and is available on a separate page.

The two systems are complementary: you can add the mounting plate later without modifying anything already installed.

Black or silver, and the road remains open

Black or silver, and the road remains open

The two finishes make no technical difference: same aluminum, same locks, same durability. The choice is purely aesthetic.

If you prefer the semi-rigid cases in the future, the same frames accommodate the 40+30-liter WANDERER cases: you change the cases, not the structure.

FAQs

For more information, please see our FAQ.

What material are Pike Tracker cases made of?

The cases are made of high-strength aluminum alloy, with reinforced corners and an anodized/powder-coated finish to ensure strength and durability even on off-road trails.

Are the cases waterproof and suitable for rain or harsh conditions?

Yes. Pike Tracker cases are designed with precision seals to provide protection from water and dust, offering excellent performance even on wet terrain or in heavy rain.

On which motorcycles can I mount Pike Tracker cases?

The Pike Tracker series is designed for ADV/touring motorcycles. The available kits cover a wide range of models: BMW, KTM, Honda, Suzuki, Yamaha, Ducati, Triumph, and others. However, it is important to check compatibility with your motorcycle's frame/rack and, if necessary, choose the specific kit.

Do the cases include anti-theft locks?

Yes — Pike Tracker cases come with a high-quality cylinder lock system, retractable keys, and an anti-theft mechanism with a low risk of duplication.

Can accessories be added or the load capacity expanded?

Yes — the lid panels have pre-installed mounting points that allow you to attach additional bags, camping equipment, or other accessories according to your travel needs.

Didn't find the answer you were looking for?

Do not hesitate to contact us

Buying guides, technical comparisons, and news on adventure motorcycle accessories

Before choosing

View all

Staffa in acciaio inox per faretti supplementari, con barra da 22 mm sotto il faro

Auxiliary spotlight mounts: where additional spotlights are actually installed

Universal collars hold by friction, and friction degrades: after a few hundred kilometers, the beam points elsewhere. The three possible positions, the standard diameter, and the thumb-operated control.

Read moreabout Auxiliary spotlight mounts: where additional spotlights are actually installed

Protezione in plastica tecnica con tamponi in gomma per barre paramotore da 25 mm

Crash bars: how to protect them and what you can mount on them

The engine guard does its job only once—and that’s when it gets scratched. Crash bars as sacrificial parts, and why the tube diameter determines everything you can mount on them.

Read moreabout Crash bars: how to protect them and what you can mount on them

Borsa attrezzi arrotolabile per moto, aperta con gli attrezzi nelle tasche

Motorcycle tool kit: what to really bring on a trip

The problem is almost never what you brought, but how you carried it. The four breakdowns that actually happen, the rule that halves the weight, and where to store the kit on the motorcycle.

Read moreabout Motorcycle tool kit: what to really bring on a trip