JPT661W

Code

Single plate

Content

PIKE TRACKER and TIBET

Series

KOVE 800 X

Motorcycle

Identification

Product code

JPT661W

Official name Top Case Rack

Served top case series

PIKE TRACKER, TIBET and CONQUEROR

As stated in the user manual

Compatibility

KOVE 800X

Since 2023

Year stated in the manual

Complementary product

JP661B side case frames

The plate works on the rear subframe, and the frames on the sides

Assembly

Mounting points

Original rear rack

With four spacers inserted

Parts to remove

Nobody

The manual does not include any removal: both steps are for installation only.

Tightening torque

20 N·m on all four M8x30 screws

To be administered in sequence after completing the adjustments

Maximum load

The one specified by KOVE for the rear luggage rack

The limit includes the plate, top case, and contents. LOBOO does not specify its own value.

Equipment

Package contents

4 items: plate, 4 spacers, 4 M8x30 screws, 1 wrench

It is the most essential kit in the plate range. Case not included

Spacers

4 bushings, 12 mm, 18 mm outer diameter, and 8.5 mm bore

Tool included

Assembly key included

Materials

Material

Not stated by the manufacturer

The manual does not specify the material of the plate.

Weight

Not stated by the manufacturer

Specifications declared by the manufacturer LOBOO. If in doubt about compatibility with your model, please contact us before purchasing.

The steel support for mounting a LOBOO top case on the KOVE 800 X.

All you need to know before ordering

Technical specifications, equipment, delivery, and warranty: find every detail, verified against official LOBOO documentation, below.

Description Top Case Plate for KOVE 800X from 2023 | top case mount

It is the base that allows you to mount a top case on the KOVE 800X from 2023 onward. It rests on the original rear luggage rack with four spacers inserted between them: there is nothing to remove from the motorcycle; the manual does not require any removal.

The simplest installation in the range

The package contains four items: the plate, four 12 mm spacers, four M8×30 screws, and the key. Nothing else. It is the most basic kit among all LOBOO plates and can be installed in two steps.

The torque is 20 N·m: here the screws are M8, not M6 as on many other plates in the range, so the value is higher. As always, complete the adjustments first, then tighten to the specified torque in sequence. The manual is available in eight languages, including Italian.

Which top cases you can mount

The manual lists the PIKE TRACKER, TIBET and CONQUEROR series for this plate. The top case is not included: this page concerns the plate only, and LOBOO aluminium top cases can only be mounted on LOBOO plates and luggage racks.

The complete system

The plate mounts on the rear subframe; the JP661B side pannier racks, which have their own page, are mounted on the sides. Together, they complete the 800X luggage system.

The rear load has a limit

LOBOO does not specify a maximum load for the plate itself: the limit indicated by KOVE in the owner's manual for the rear luggage rack applies, and includes the plate, top case, and contents. Check the fasteners again after the first 100–200 km and make sure the top case does not obscure the licence plate or rear lights.

The plate material is not specified by any LOBOO source, including the manual.

Why choose it
  • Top case base: accepts PIKE TRACKER and TIBET top cases from the LOBOO range.
  • Dedicated mounting: on the fastening points provided by the manufacturer.
  • Complementary to the side frames: the plate on the rear subframe, the JP661B frames on the sides.
Who is it recommended for

The plate is the base to which the top case attaches: the top case is a separate item and is not included.

It can be mounted together with the JP661B side racks: these are complementary products and together complete the luggage system for the KOVE 800 X.

Documents and manufacturer

Assembly and Notes

  • The top case is not included in the delivery.
  • Respect the maximum load on the rear rack indicated by the manufacturer: the limit includes the plate and loaded top case.
  • Recheck the tightening after the first 100-200 km.
  • The load must not cover the license plate and tail lights or extend beyond the limits of the Highway Code.

How does it work, in detail?

The top case base for the KOVE 800 X

The top case base for the KOVE 800 X

The JPT661W plate is the base onto which the top case attaches, mounted on the manufacturer’s designated mounting points. The top case is a separate item.

It combines with the JP661B side frames: the plate goes on the rear subframe, and the frames on the sides. Together, they complete the luggage system.

The top-case mount on the KOVE

The top-case mount on the KOVE

The JPT661W plate accepts the PIKE TRACKER and TIBET top cases from the LOBOO range, in black or silver.

Mounting on the manufacturer's designated attachment points, with no drilling or permanent modifications.

The top case is not included

The top case is not included

This page concerns the plate only: it is the base onto which the top case attaches, and the top case must be purchased separately.

This is also why it is best to install it first: your choice of top case remains open.

Compatible with side frames

Compatible with side frames

The plate mounts on the rear subframe, while the JP661B frames mount on the sides: they are complementary products and together complete the luggage system.

However, they are not required: the plate can also be installed on its own if you only need the top case.

The rear load has a specific limit.

The rear load has a specific limit.

The manufacturer specifies a maximum load for the rear rack: this includes the mounting plate, top case, and contents.

It is the highest and rearmost point of the load: exceeding it affects stability more than the same weight in the side cases.

License plate and lights must remain visible

License plate and lights must remain visible

After installation, check that the top case does not cover the license plate or rear lights and does not extend beyond the limits established by the Highway Code.

Recheck the fasteners after the first 100–200 km: the rear rack flexes significantly when carrying a moving load.

FAQs

For more information, please see our FAQ.

Which top cases does this plate accept?

The manual lists the plate for the PIKE TRACKER, TIBET, and CONQUEROR series, in black or silver finish. The top case is a separate item and is not included: this page concerns the plate only.

Can it be installed together with the side frames?

Yes: the plate mounts on the rear subframe, while the JP661B frames mount on the sides. They are complementary products and together complete the luggage system for the KOVE 800 X.

Is the product covered by a warranty?

Yes: all LOBOO products sold on Endurrad are covered by the 24-month statutory consumer warranty. In the event of a lack of conformity, we will handle the claim with the manufacturer.

Can I return the product if it isn’t suitable?

Yes, you are entitled to return the item within 14 days of delivery under online purchase regulations. The product must be intact and in its original packaging: contact us and we’ll guide you through the process.

How does shipping work?

Tracked shipping throughout Italy: the product is carefully inspected and prepared before leaving our warehouse. The mounting accessories included in the original package are included.

Can I pay in installments?

Yes: at checkout, installment payment services are available directly among the payment methods, with no additional paperwork.

Is it an original LOBOO product?

Yes: we sell exclusively original LOBOO products, new and in the packaging provided by the manufacturer, with official documentation.

Didn't find the answer you were looking for?

Do not hesitate to contact us

Buying guides, technical comparisons, and news on adventure motorcycle accessories

Before choosing

View all

Coppia di riser manubrio LOBOO montati su BMW R 1300 GS, finitura anodizzata argento

Riser manubrio moto: quale rialzo scegliere per la tua moto

Rialzo o arretramento? La gamma completa dei riser manubrio LOBOO per BMW GS, KTM, Honda, Triumph e altre adventure: misure dichiarate, prezzi reali e il controllo da fare sempre dopo il montaggio.

Read moreabout Riser manubrio moto: quale rialzo scegliere per la tua moto

Triumph Tiger 900 Rally Pro, base della Desert Edition 2026, equipaggiata con valigie laterali LOBOO Pike Tracker

Triumph Tiger 900 and 1200 Alpine and Desert Edition: what’s the difference between the two

Triumph adds the Alpine and Desert Editions to the Tiger 900 and 1200 lineup: standard suspension, wheels, and protection equipment differ. Here are the actual differences, official prices in Italy, and what to add for touring.

Read moreabout Triumph Tiger 900 and 1200 Alpine and Desert Edition: what’s the difference between the two

Moto adventure touring allo stand di una casa motociclistica al Motor Bike Expo di Verona

Motor Bike Expo 2027 in Verona: dates, tickets, halls, and why you should go

Motor Bike Expo 2027 takes place from January 22 to 24 at Veronafiere. Opening hours, tickets, halls, outdoor areas, guests, and the figures from the 2026 edition, presented by Endurrad, an exhibitor in Verona since 2025.

Read moreabout Motor Bike Expo 2027 in Verona: dates, tickets, halls, and why you should go