74 or 90L

Configurations

10kg

Maximum weight per suitcase

JP151B

Side frames

Three

Accepted series

Capacity

Settings

37+37 or 45+45

Symmetrical, two suitcases of equal capacity

Maximum volume

90

In the 45+45 configuration

Kit contents

Side frames

JP151B

Included, R 1300 GS Adventure only

Suitcases

PIKE TRACKER

Aluminum pair, top case not included

LED light with sensor

Not included

LOBOO supplies it as standard only with the three-piece luggage set, not with the side-case set.

Dimensions and weight

Baggage weight

6.2 (P37) / 6.5 (P45)

Single suitcase, frames excluded

External dimensions for suitcase

540 × 272 × 388 (P37) / 540 × 321 × 388 (P45)

Maximum with accessories installed. Interior: 490 × 230 × 362 (P37), 490 × 280 × 362 (P45)

Compatibility

Motorcycle

R 1300 GS Adventure

BMW, from 2024. Not the standard GS.

Upgrade possible

CONQUEROR

Only R 1300 frames that accept C45L and C45R

To be verified

Short exhaust version

CPQ131

Also requires the exhaust deflector, a separate item

Specifications declared by the manufacturer LOBOO. If in doubt about compatibility with your model, please contact us before purchasing.

All you need to know before ordering

Technical specifications, equipment, delivery, and warranty: find every detail, verified against official LOBOO documentation, below.

Description BMW R 1300 GS Adventure Side Cases

Complete kit for BMW R 1300 GS Adventure from 2024 onward: a pair of JP151B side frames with mounting hardware, plus two PIKE TRACKER aluminum cases in a symmetrical 37+37 or 45+45 configuration, in the selected finish.

Pay attention to the version: JP151B frames are designed for the R 1300 GS Adventure. The standard GS requires the kit with JP131B frames, on a separate page: the two are not interchangeable, and this is the most common ordering mistake in the R 1300 range.

How to choose the configuration

  • 37+37 — keeps the motorcycle narrower, which is noticeable on an Adventure that is already wide in technical sections and when maneuvering
  • 45+45 — 90 liters of total capacity, for long trips or traveling two-up

LOBOO specifies a maximum load of 10 kg per side case, in both configurations.

Construction

  • High-strength aluminum, with lower corners protected by structural plastic bumpers
  • Key lock with a five-tumbler cylinder, removable and replaceable without changing the case
  • Scratch-resistant inner lining and 3M reflective inserts on the outer side
  • Finishes: polished silver or matte black, with the same construction

LOBOO states that the series is water- and dust-resistant, but does not publish an IP rating: we do not list one because it is not a manufacturer-certified specification.

Three case series on the same frames

The JP151B manual lists them for the PIKE TRACKER and CONQUEROR series; they also support the 40+40-liter semi-rigid WANDERER cases, which require an 18 mm tube. Starting with this kit, you can therefore switch in the future to the CONQUEROR C45L and C45R or to the semi-rigid cases without rebuilding the frame system.

Installation

No drilling is required. However, the manual calls for removing some original components in the tail section, including the seat and luggage rack, with one part to be refitted after installation. Final tightening must be done in sequence to 18 N·m on all M8 bolts, after completing the adjustments. With the short exhaust, the CPQ131 deflector is also required and is sold separately.

What is not included

The top case and its rear mounting plate are purchased separately. The LR06 LED light with sensor is supplied by LOBOO only with the three-case set, so it is not included in this kit.

Why choose it
  • Complete system:JP151B frames and a pair of panniers in one order.
  • Open to the CONQUEROR line:the JP151B are the only ones in the R 1300 range that also accept LOBOO top cases.
  • Symmetrical configurations:37+37 or 45+45, up to 90 liters total.
  • High-strength aluminum:waterproof, with key locks, in black or silver.
Who is it recommended for

How to choose your configuration:

  • 37+37: Keeps the bike narrower, sufficient for multi-day trips.
  • 45+45: 90 liters total for long trips or two-up riding.

Please note the version: This kit uses JP151B frames, dedicated to the R 1300 GS Adventure. For the standard R 1300 GS, you need the kit with JP131B frames, on a separate page: the two frames are not interchangeable.

Exclusive advantage: these frames leave the door open for a future upgrade to CONQUEROR C45L and C45R panniers.

Documents and manufacturer

Assembly and Notes

  • The kit includes side frames and a pair of panniers: the top case and its mounting plate are not included.
  • Observe the maximum load per side frame indicated by BMW in the motorcycle's owner's manual.
  • Recheck all fastenings after the first 100-200 km.
  • The load must not cover the license plate and tail lights or protrude beyond the limits of the Highway Code.

Key Specifications

  • Water resistance: Waterproof IP68

  • Quantity: 3 PCS

  • Material: Aluminum

  • Material: Steel

  • Colors: BLACK or SILVER

How does it work, in detail?

Open frames also available in the CONQUEROR line

Open frames also available in the CONQUEROR line

The JP151B frame manual lists them under two series: PIKE TRACKER and CONQUEROR, with LOBOO as the top-of-the-line range. Starting with this kit leaves the way open for a future upgrade without rebuilding the structure.

Symmetrical 37+37 or 45+45 configurations in PIKE TRACKER aluminum, in black or silver.

The nine-point attachment, and why it matters in a fall

The nine-point attachment, and why it matters in a fall

The case and rack engage at nine contact points distributed across the entire surface, rather than at the usual two or three hooks. The load is distributed, and the rattling that appears after a few thousand kilometers with cheaper mounts does not occur here.

What is interesting is how it behaves when things go wrong. In a sideways fall or a slide, the mount holds: the case stays in place and provides protection. In a frontal impact, however, it deliberately detaches, because a case that remains stuck transfers the impact to the subframe and throws you off course.

This is a design choice, not a limitation: utility model patent ZL 2017 2 0624675.2. In everyday use, this means tool-free release by hand.

37+37 or 45+45: how to really decide

37+37 or 45+45: how to really decide

The 37+37 keeps the motorcycle narrower, and on an Adventure that is already wide by nature, this is something you notice in technical sections and during maneuvering.

The 45+45 offers a total of 90 liters and is the choice for long trips or two-up riding, where the Adventure’s larger fuel tank really comes into its own.

JP151B, not JP131B: the check to be performed

JP151B, not JP131B: the check to be performed

This kit fits the JP151B frames, designed for the Adventure’s rear subframe. The standard R 1300 GS requires the JP131B.

The two codes are not interchangeable: this is the most common ordering mistake in the R 1300 range, and it can be avoided by checking the registration document.

Aluminum, key locks, waterproofness

Aluminum, key locks, waterproofness

PIKE TRACKER cases are made of high-strength aluminum alloy, with perimeter seals and keyed locks on every case.

They are the most widely used series in the LOBOO range, making replacement parts and accessories easiest to find over time.

Black or silver, same construction

Black or silver, same construction

The two finishes make no technical difference: same aluminum, same locks, same sealing. The choice is purely aesthetic.

Silver echoes the raw aluminum of raid cases, while black blends with the engine guard and protective equipment without any color contrast.

FAQs

For more information, please see our FAQ.

I have the R 1300 GS with the short exhaust: do I need anything else?

Yes. LOBOO’s documentation indicates that on the R 1300 GS and GS Adventure with the short exhaust, installing the pannier racks also requires the CPQ131 exhaust deflector, available on a separate page for €28.50. Without it, the installation will not be correct. If you’re unsure which exhaust version you have, contact us and we’ll verify it together before you place the order.

What’s the difference compared with the kit for the standard R 1300 GS?

The frames are different: these are the JP151B frames, sized for the Adventure’s rear subframe, while the standard GS uses the JP131B frames. The cases are the same. The two frames are not interchangeable.

Can I mount the CONQUEROR panniers on these frames?

Yes. The JP151B racks are the only ones in the R 1300 range that also accommodate the CONQUEROR C45L and C45R panniers, LOBOO’s flagship line. This is an exclusive advantage of the Adventure version.

Is the product covered by a warranty?

Yes: all LOBOO products sold on Endurrad are covered by the 24-month statutory consumer warranty. In the event of a lack of conformity, we will handle the claim with the manufacturer.

Can I return the product if it isn’t suitable?

Yes, you are entitled to return the item within 14 days of delivery under online purchase regulations. The product must be intact and in its original packaging: contact us and we’ll guide you through the process.

How does shipping work?

Tracked shipping throughout Italy: the product is carefully inspected and prepared before leaving our warehouse. The mounting accessories included in the original package are included.

Can I pay in installments?

Yes: at checkout, installment payment services are available directly among the payment methods, with no additional paperwork.

Is it an original LOBOO product?

Yes: we sell exclusively original LOBOO products, new and in the packaging provided by the manufacturer, with official documentation.

Didn't find the answer you were looking for?

Do not hesitate to contact us

Buying guides, technical comparisons, and news on adventure motorcycle accessories

Before choosing

View all

Staffa in acciaio inox per faretti supplementari, con barra da 22 mm sotto il faro

Auxiliary spotlight mounts: where additional spotlights are actually installed

Universal collars hold by friction, and friction degrades: after a few hundred kilometers, the beam points elsewhere. The three possible positions, the standard diameter, and the thumb-operated control.

Read moreabout Auxiliary spotlight mounts: where additional spotlights are actually installed

Protezione in plastica tecnica con tamponi in gomma per barre paramotore da 25 mm

Crash bars: how to protect them and what you can mount on them

The engine guard does its job only once—and that’s when it gets scratched. Crash bars as sacrificial parts, and why the tube diameter determines everything you can mount on them.

Read moreabout Crash bars: how to protect them and what you can mount on them

Borsa attrezzi arrotolabile per moto, aperta con gli attrezzi nelle tasche

Motorcycle tool kit: what to really bring on a trip

The problem is almost never what you brought, but how you carried it. The four breakdowns that actually happen, the rule that halves the weight, and where to store the kit on the motorcycle.

Read moreabout Motorcycle tool kit: what to really bring on a trip