65L

Total volume

10kg

Maximum weight per suitcase

11,6kg

Weight of the pair of suitcases

JP871B

Side frames

Capacity

Settings

35+30

Asymmetrical: the right side leaves room for the exhaust pipe

Total volume

65

35 L on the left, 30 L on the right

Kit contents

Side frames

JP871B

Included, in steel

Suitcases

P35L + P30R

Aluminum PIKE TRACKER, top case not included

Compatibility

Motorcycle

Ténéré 700

Yamaha, since 2022

Semi-rigid alternative

BCB4030TBK

WANDERER 40+30 L on the same frames

Dimensions

Left suitcase interior

451 x 227 x 381

Length × depth × height

Left suitcase external dimensions

498 x 268 x 408

Mounted accessories included

Right suitcase interior

451 x 227/167 x 381

The two measurements are the upper part and the lower part.

Right suitcase external dimensions

498 x 244/208 x 408

Mounted accessories included

Closure

Lock

By key

Five-pin tumbler cylinder, removable and replaceable

Water resistance

IP rating

Undeclared

LOBOO claims water and dust resistance without publishing a rating

Specifications declared by the manufacturer LOBOO. If in doubt about compatibility with your model, please contact us before purchasing.

Telai JP871B e coppia di valigie in alluminio 35+30 L per Tenéré 700

All you need to know before ordering

Technical specifications, equipment, delivery, and warranty: find every detail, verified against official LOBOO documentation, below.

Description YAMAHA TENERE 700 Side Cases

Complete kit for Yamaha Ténéré 700: a pair of JP871B side frames with mounting hardware, plus two PIKE TRACKER aluminum panniers measuring 35 and 30 liters, in your chosen finish. One order, nothing else to match.

Why the two sides have different capacities

The right pannier holds 30 liters instead of 35 because it is shaped around the exhaust: this is the version LOBOO calls exhaust avoidance, with a recessed lower wall. On a minimalist, off-road-oriented bike like the Ténéré, keeping the profile narrow on the hot side is part of the design. The left pannier, without that constraint, retains its full 35-liter capacity.

How much they hold and how much they can weigh

LOBOO specifies a maximum load of 10 kg per side pannier. The pair weighs 11.6 kg when empty, excluding the frames: 6 kg for the left and 5.6 kg for the right.

  • Left P35L — interior 451 x 227 x 381 mm, external dimensions 498 x 268 x 408 mm
  • Right P30R — interior 451 x 227/167 x 381 mm, external dimensions 498 x 244/208 x 408 mm

The two measurements for the right side refer to the upper and lower sections, where it is recessed to clear the exhaust. These are dimensions declared by the manufacturer based on manual measurement, so some tolerance should be expected.

Construction

  • High-strength aluminum, with the lower corners protected by structural plastic bumpers
  • Key lock with a five-wafer cylinder, removable and replaceable without changing the pannier
  • Scratch-resistant inner lining, fabric pocket in the left lid, and storage net on the right
  • Lid opening stop to prevent it from hitting the frame
  • 3M reflective inserts on the outer side
  • Finishes: polished silver or matte black

LOBOO states that the series is water- and dust-resistant, but does not publish an IP rating; we do not list one because it is not a manufacturer-certified specification.

What is not included

The top case and its rear mounting plate are sold separately. The LR06 LED light with sensor is supplied by LOBOO only with the three-pannier set, so it is not included in this kit.

Alternatives on the same frames

The JP871B frames also support the WANDERER semi-rigid panniers measuring 40+30 liters, if you prefer a lighter solution: we verified this compatibility ourselves, based on the 18 mm tube requirement LOBOO specifies for those panniers. If you already have the frames, you can purchase only the panniers from the PIKE TRACKER series page. However, LOBOO panniers can only be mounted on LOBOO frames; they are not interchangeable with mounts from other brands.

Maintenance

Wash with a water jet held at least one meter away, using a neutral detergent, and dry immediately afterward. Avoid acidic or alkaline products. Make a note of the number stamped on the key: it is needed to have a duplicate made.

Why choose it
  • Complete system:JP871B frames and a pair of cases in one order.
  • PIKE TRACKER aluminum cases:key locks and waterproof.
  • Two finishes:black or silver, with the same construction.
  • Geometry designed around the exhaust:the narrower right case keeps the motorcycle compact.
Who is it recommended for
  • If you're starting from scratch:This is the most direct solution, everything compatible in one single order.
  • If you already have JP871B frames:Purchase only the cases from the PIKE TRACKER series page.
  • If you prefer semi-rigid bags:The same frames also accept 40+30 liter WANDERER bags.

Compatibility: Yamaha Ténéré 700 from 2022. The top case and its plate are not included in the kit.

Documents and manufacturer

Assembly and Notes

  • The kit includes side racks and a pair of panniers: the top case and its plate are not included.
  • Respect the maximum load per side rack indicated by Yamaha in the motorcycle's manual.
  • Recheck the tightening after the first 100-200 km and periodically with off-road use.
  • The load must not cover the license plate and tail lights or protrude beyond the limits of the Highway Code.

Key Specifications

  • Quantity: 3 PCS

  • Water resistance: Waterproof IP68

  • Colors: BLACK or SILVER

  • Material: Steel

  • Material: Aluminum

How does it work, in detail?

Frames and cases in a single order

Frames and cases in a single order

The complete system for the Ténéré 700: JP871B frames plus the pair of PIKE TRACKER aluminum panniers, in the finish of your choice. No need to search for separate pieces.

The difference in capacity between the two sides is due to the exhaust routing: the narrower right pannier keeps the motorcycle compact in difficult passages.

Why 35 on the left and 30 on the right?

Why 35 on the left and 30 on the right?

The exhaust runs along the right side of the Ténéré 700. The narrower case leaves the necessary clearance and prevents the motorcycle from becoming wider on that side.

On a motorcycle designed to be minimalist and off-road-oriented, maintaining a narrow profile is part of the design.

Aluminum, key locks, waterproofness

Aluminum, key locks, waterproofness

PIKE TRACKER cases are made of high-strength aluminum alloy, with perimeter seals and keyed locks on every case.

It is the most widely used series in the LOBOO range, making replacement parts and accessories easiest to find over time.

The JP871B frames are included.

The JP871B frames are included.

You do not need to search for them separately: the JP871B frames are included in the order, with installation on Yamaha’s designated mounting points.

If you already have the frames installed, you can purchase just the cases from the PIKE TRACKER series page.

Do the same frames accommodate semi-rigid ones?

Do the same frames accommodate semi-rigid ones?

If in the future you prefer the 40+30-liter WANDERER cases, you don’t need to rebuild the structure: the JP871B supports them. This is compatibility we verified ourselves, based on the 18 mm tube requirement that LOBOO specifies for those cases.

Aluminum offers better protection and can be locked, while the soft cases weigh less and absorb impacts in a fall: for the Ténéré, it depends on how much off-road riding you actually do.

Black or silver, same construction

Black or silver, same construction

The two finishes make no technical difference: same aluminum, same locks, same sealing. The choice is purely aesthetic.

The top case and its mounting plate are not included in the kit. If you need them, write to us and we’ll check availability and lead times.

FAQs

For more information, please see our FAQ.

What exactly does the kit include?

JP871B side frames plus the pair of PIKE TRACKER panniers in the selected finish. If you already have the frames installed, you can purchase just the panniers from the PIKE TRACKER series page. The top case and its mounting plate are not included.

From which model year is it compatible with the Ténéré 700?

The official LOBOO listing specifies the Yamaha Ténéré 700 from 2022 onward. Check your motorcycle’s year and trim before purchasing; if in doubt, contact us and we’ll confirm compatibility in writing.

Is the product covered by a warranty?

Yes: all LOBOO products sold on Endurrad are covered by the 24-month statutory consumer warranty. In the event of a lack of conformity, we will handle the claim with the manufacturer.

Can I return the product if it isn’t suitable?

Yes, you are entitled to return the item within 14 days of delivery under online purchase regulations. The product must be intact and in its original packaging: contact us and we’ll guide you through the process.

How does shipping work?

Tracked shipping throughout Italy: the product is carefully inspected and prepared before leaving our warehouse. The mounting accessories included in the original package are included.

Can I pay in installments?

Yes: at checkout, installment payment services are available directly among the payment methods, with no additional paperwork.

Is it an original LOBOO product?

Yes: we sell exclusively original LOBOO products, new and in the packaging provided by the manufacturer, with official documentation.

Didn't find the answer you were looking for?

Do not hesitate to contact us

Buying guides, technical comparisons, and news on adventure motorcycle accessories

Before choosing

View all

Borsa posteriore da 50 litri montata sul codone di una BMW R 1250 GS Adventure con valigie laterali

Motorcycle dry bag: why it moves and how to keep it secure

The typical complaint is not “water got in,” but “after fifty kilometers, it was crooked.” Why a soft bag crumples, what the internal plate and vent valve actually do, and the two constraints of the Highway Code that no product page mentions.

Read moreabout Motorcycle dry bag: why it moves and how to keep it secure

Mini caricabatterie per moto da 12V alimentato via USB, tenuto in mano

Motorcycle battery in winter: why it dies and how to keep it alive

The damage doesn’t happen in March when the motorcycle won’t start, but gradually between December and February. What is sulfation, why does almost no one use a battery maintainer, and how can it be resolved in a garage without an outlet?

Read moreabout Motorcycle battery in winter: why it dies and how to keep it alive

Staffa in acciaio inox per faretti supplementari, con barra da 22 mm sotto il faro

Auxiliary spotlight mounts: where additional spotlights are actually installed

Universal collars hold by friction, and friction degrades: after a few hundred kilometers, the beam points elsewhere. The three possible positions, the standard diameter, and the thumb-operated control.

Read moreabout Auxiliary spotlight mounts: where additional spotlights are actually installed