Can I mount luggage from other brands on them, or these on other frames?

No, in either direction. LOBOO’s documentation is explicit: LOBOO aluminum cases can only be mounted on LOBOO racks and are not compatible with racks from other brands. The same document specifies that the racks are installed without permanent modifications to the motorcycle.

What are the included threaded inserts used for?

The frame kit includes two T-M8 threaded inserts specified in the parts list: they create the mounting points for screwing in the bolts where the motorcycle does not already have a ready-made thread. It is the only frame in the range to include them.They must be positioned carefully because, once in place, they bear the load on the side. The manual shows their location in the installation view.

What torque should the frame screws be tightened to?

The manual specifies 14 N·m for the M6 bolts and 22 N·m for the M8 bolts: these are the highest values among the LOBOO frames we carry.If you have already installed a LOBOO frame on another motorcycle, don't rely on memory: on the Norden 901, for example, they are 12 and 20 N·m. A torque wrench is required; it is not included.

Should we drill the motorcycle?

No. The manual does not indicate any drilling: the frame is secured to the existing mounting points, and the modification is reversible. The original parts removed must be reinstalled according to the torque specifications indicated by KTM.

Are the hardware and tools included?

Yes. The frame bill of materials lists thirteen items: the two halves, the crossbar, two types of spacer, two threaded inserts, four screw sizes between M6 and M8, twelve washers, and the service tool.The only tool you need is a torque wrench.

Is the product covered by a warranty?

Yes: the 24-month statutory warranty of conformity provided for by the Consumer Code applies. In the event of a defect, we will handle the claim with the manufacturer.

KTM 790-890 Adventure Side Case Frames - Endurrad®

-10%Consegna in 2-3 giorni lavorativi

Frame + 2 suitcases Kit

65 L Total volume

14 and 22 N·m Torque pairs

11,6 kg Empty suitcases

LOBOO ✓ Prodotto originaleCod. JP221B+P35L-BK+P30R-BK

KTM 790-890 Adventure Side Cases

€1.040,00 ~~€1.155,00~~Risparmi €115

Paga in 3 rate da €346,66 senza interessi

Va bene per la tua moto?

Progettato per: 790 Adventure, 890 Adventure.

LOBOO PIKE TRACKER aluminum cases (Color)

Silver/BlackNero

Disponibile, pronto per la spedizione🚚 Consegna in 2-3 giorni lavorativi

Spedizione gratuitaoltre 100 € in Italia

Reso entro 14 giornidalla consegna

Garanzia 24 mesigaranzia legale

Pagamento sicurocarte, PayPal e Klarna

Dubbi sulla compatibilità? Scrivici, ti rispondiamo noi. WhatsApp

Panoramica

In breve

Kit completo per KTM 790 e 890 Adventure: telai laterali JP221B piu' coppia di valigie PIKE TRACKER in alluminio da 35 e 30 litri, con serrature a chiave. Carico massimo dichiarato 10 kg per valigia.

Complete system

frames and a pair of panniers in a single order, no parts to search for separately.

PIKE TRACKER aluminum panniers

key locks and waterproof seal.

Two finishes

black or silver, with the same construction.

Geometry designed around the exhaust

the narrower right pannier keeps the bike compact.

Dal produttore LOBOO

Il kit riunisce due prodotti LOBOO distinti, ciascuno con la propria denominazione ufficiale.

Valigie: PIKE TRACKER Series Aluminum Case, modelli P35L per il lato sinistro e P30R per il destro.
Telaio: PIKE TRACKER & CONQUEROR Side Case Rack, modello JP221B, dichiarato per KTM 790 Adventure e 790 Adventure R dal 2019.

Produttore: Shenzhen Loboo Motor Accessories Co., Ltd — Room 101, 201, 301, Building F, No. 30 Tongfu Road, Xinsheng Community, Longgang Subdistrict, Longgang District, Shenzhen, Guangdong, Cina.

Garanzia: si applica la garanzia legale di conformità di 24 mesi prevista dal Codice del Consumo per gli acquisti effettuati da consumatori.

Leggi la descrizione completa

The LOBOO side cases for KTM 790 and 890 Adventure are a complete system: JP221B racks plus the pair of PIKE TRACKER P35L and P30R aluminum cases, in the finish of your choice.

They fit both engine sizes, in standard and R versions: 790 and 890 Adventure share the same chassis; the engine is different.

Key features

Rack and case kit in a single order
High-strength aluminum, waterproof, with keyed locks
Two finishes: black or silver

The difference in capacity between the two sides is due to the exhaust routing: the narrower right case keeps the bike compact in difficult passages.

If you prefer semi-rigid cases, the same racks fit the WANDERER 40+30-liter cases.

Nella confezione

✅ The complete, original, and new LOBOO kit, in manufacturer's packaging.
📦 Includes: JP221B side rack pair, P35L and P30R PIKE TRACKER aluminum pannier pair, locks with keys, and mounting hardware.
⚠️ Not included: the top case. Top case and rear plate are purchased separately.
🔒 Closed system: LOBOO panniers can only be mounted on LOBOO racks. By purchasing the kit, you already have the correct match, without adapters.
🏍️ Mounts on 790 and 890 Adventure, standard and R versions: they share the same chassis, only the engine changes.
↔️ Asymmetrical configuration, 35 liters on the left and 30 on the right: the narrower right pannier leaves space for the exhaust.
🚚 Tracked shipping throughout Italy, with product inspection before dispatch.
🛡️ 24-month legal warranty for consumers, according to current regulations.
💳 Payment also available in installments with services at checkout.
🔧 Observe the indicated torque settings and recheck fastenings after the first few kilometers, especially with loaded panniers.

BLACK or SILVERColors

SteelMaterial

AluminumMaterial

Complete system – JP221B racks + pair of PIKE TRACKER panniers

How does it work, in detail?

Materials, construction, and everyday use: every aspect explained one by one.

Why 35 on the left and 30 on the right?

The exhaust runs along the right side of the 790 Adventure. The narrower case leaves the necessary space and prevents the motorcycle from becoming wider on that side.

On a motorcycle with a lowered fuel tank and a rally-oriented design, that difference is noticeable on winding sections.

One kit for the 790 and 890 Adventure

KTM 790 and 890 Adventure share the same chassis: the engine differs, not the rear subframe. Frames and luggage fit both models, in standard and R versions.

It is also an advantage when it comes to resale: if you switch from the 790 to the 890, the system goes with you.

Aluminum, key locks, waterproofness

The PIKE TRACKER cases are made of high-strength aluminum alloy, with perimeter seals and keyed locks on each case.

It is the most popular series in the LOBOO range: the same case can be mounted on more than fifteen different motorcycles by changing only the frame.

The JP221B frames are included

You don’t need to look for them separately: the JP221B frames are included in the order and mount onto the attachment points provided by KTM.

If you already have the frames installed, you can purchase just the cases from the PIKE TRACKER series page.

Do the same frames accommodate semi-rigid ones?

If in the future you prefer the 40+30-liter WANDERER cases, you do not need to rebuild the frame: the JP221B racks support them. This is compatibility we verified ourselves, based on the 18 mm tube requirement that LOBOO specifies for those cases.

Aluminum provides better protection and can be locked, while the semi-rigid cases weigh less and absorb impacts when dropped.

Black or silver, same construction

The two finishes make no technical difference: same aluminum, same locks, same sealing. The choice is purely aesthetic.

On KTM orange, black tones it down, while silver creates contrast: it depends on how much you want the cases to stand out.

Dati dal manuale d'uso LOBOO

Specifiche tecniche

Tutti i dati

Kit contents

Side frames

JP221B Included, in steel

Suitcases

P35L + P30R Aluminum PIKE TRACKER, top case not included

Product

Official chassis designation

PIKE TRACKER & CONQUEROR Side Case Rack Model JP221B, name as listed in the LOBOO manual

Compatibility

Motorcycle

790 and 890 Adventure KTM, standard and R versions. Same chassis.

Motorcycle declared as manual transmission

KTM 790 Adventure and 790 Adventure R from 2019 They are the only versions listed on the chassis manual cover.

To be verified

KTM 890 Adventure

Compatibility inferred, not stated The 890 shares its chassis with the 790, but it is not listed in the manual: this is our own verification, pending confirmation from the distributor.

Compatibility

Semi-rigid alternative

BCB4030TBK WANDERER 40+30 L on the same frames

Capacity

Total volume

65 L 35 L on the left, 30 L on the right

Settings

35+30 L Asymmetrical: the right side leaves room for the exhaust pipe

Dimensions

Left suitcase interior

451 x 227 x 381 mm Length × depth × height

Left suitcase external dimensions

498 x 268 x 408 mm Mounted accessories included

Right suitcase interior

451 x 227/167 x 381 mm The two measurements are the upper part and the lower part.

Right suitcase external dimensions

498 x 244/208 x 408 mm Mounted accessories included

Weight

Empty suitcases

11,6 kg 6 kg on the left, 5.6 kg on the right

Closure

Lock

By key Five-pin tumbler cylinder, removable and replaceable

Water resistance

IP rating

Undeclared LOBOO claims water and dust resistance without publishing a rating

Assembly

Mounting points

Motorcycle originals The frame manual does not specify drilling instructions

Torque pairs

14 and 22 N·m 14 N·m on the M6 frame bolts, 22 N·m on the M8 bolts: the highest values among LOBOO frames

Equipment

Chassis components

13 Two halves, crossbar, two types of spacers, two threaded inserts, four screw sizes, twelve washers, and a tool

M8 threaded inserts

2 pieces They create a threaded mounting point where the motorcycle does not already have one: the only kit in the range to include them

Small errors in manual measurement are unavoidable. Always refer to the actual product.

Manuale d'uso JP221B + P35L + P30RDocumento originale LOBOO Scarica ↓

Prima di ordinare

Montaggio e requisiti

Come si monta

Il telaio si compone di due metà unite da una traversa posteriore e si fissa ai punti di ancoraggio originali: il manuale non indica forature.
Coppie di serraggio: 14 N·m sulle viti M6, 22 N·m sulle M8. Sono i valori più alti fra i telai LOBOO e non vanno presi a memoria da un altro modello.
Due inserti filettati T-M8 creano la sede per le viti dove la moto non ha già un filetto pronto.
Due viti M8×65 sono le più lunghe del kit e vanno inserite prima di serrare il resto.

Istruzioni complete e note di sicurezza

Il montaggio riguarda il telaio: le valigie si agganciano poi senza attrezzi.

Il telaio si compone di due metà unite da una traversa posteriore e si fissa ai punti di ancoraggio originali: il manuale non indica forature.
Coppie di serraggio: 14 N·m sulle viti M6, 22 N·m sulle M8. Sono i valori più alti fra i telai LOBOO e non vanno presi a memoria da un altro modello.
Due inserti filettati T-M8 creano la sede per le viti dove la moto non ha già un filetto pronto.
Due viti M8×65 sono le più lunghe del kit e vanno inserite prima di serrare il resto.

Sequenza vincolante: il manuale prescrive di non serrare a fondo durante il montaggio, di completare prima tutte le regolazioni e di serrare in sequenza. Le parti originali rimosse vanno rimontate secondo le coppie KTM.

Assembly and Notes

The kit includes side frames and a pair of panniers: the top case and its plate are not included.
Observe the maximum load per side frame indicated by KTM in the motorcycle's manual.
Recheck the tightening after the first 100-200 km and periodically with off-road use.
The load must not cover the license plate and rear lights, nor protrude beyond the limits set by the Highway Code.

Compatibility:KTM 790 and 890 Adventure, standard and R versions. The two bikes share the same chassis: the engine changes, but not the rear subframe.

If starting from scratch:this is the most straightforward solution, everything compatible in one order.
If you already have JP221B frames:purchase only the cases from the PIKE TRACKER series page.
If you prefer soft bags:the same frames accept the 40+30 liter WANDERER bags.

Per moto Ktm

KTM

Hai un dubbio sulla compatibilità?Mandaci una foto su WhatsApp: ti rispondiamo noi. Scrivici →

Domande frequenti

Le domande che ci fate più spesso

What exactly does the kit include?

JP221B side frames plus the pair of PIKE TRACKER P35L and P30R panniers in the selected finish. If you already have the frames installed, you can purchase just the panniers from the PIKE TRACKER series page.

Is it really suitable for the KTM 890 Adventure too?

The frame manual lists the KTM 790 Adventure and 790 Adventure R from 2019 onward. The manufacturer does not mention the 890: we indicate it as compatible because it shares its chassis with the 790, but this is our own verification, not a LOBOO statement.

We prefer to tell you openly: if you have an 890, write to us before ordering and we will ask the distributor for confirmation. For a thousand-euro kit, it is worthwhile for both of us.

Why do the two suitcases have different capacities, 35 and 30 liters?

Because the exhaust runs along the right side, the narrower pannier keeps the motorcycle from becoming too wide and reduces the risk of contact. It’s a design choice, not a limitation of the range.

Do the suitcases lock with a key?

Yes, with a five-pin cylinder lock that can be removed and replaced without changing the suitcase. The key is retractable and has a number stamped on it: write it down, because it allows you to request a duplicate if you lose both keys.

How much does the installed kit weigh, and how far does it protrude?

The empty cases alone weigh 11.6 kg: 6 kg for the 35-liter case and 5.6 kg for the 30-liter case. The frame and luggage must be added to these weights.

With the handles and hardware installed, the external length of each case is 498 mm: this is the measurement to use to determine whether the motorcycle will fit through where you usually keep it.

Can I also add the top-case mounting plate?

Yes: the JPT221W top-case plate is available for this motorcycle as a separate item with its own code, already listed in the Endurrad catalog. The frames in this kit remain the same, so you do not need to redo anything that has already been installed.

Dal blog

Prima di scegliere

Tutti gli articoli

Motorcycle bags: how to choose between tank, tail, side, and crash bar bags

borse moto16/10/2026