65L

Total volume

10kg

Maximum weight per suitcase

11,6kg

Weight of the pair of suitcases

JP603B

Side frames

Capacity

Settings

35+30

Asymmetrical: the right side leaves room for the exhaust pipe

Total volume

65

35 L on the left, 30 L on the right

Kit contents

Side frames

JP603B

Included. Only 800 MT-X, not MT

Suitcases

P35L + P30R

Aluminum PIKE TRACKER, top case not included

Compatibility

Motorcycle

CFMOTO 800 MT-X

From 2024. The MT requires the kit with JP601B frames.

Semi-rigid alternative

BCB4030TBK

WANDERER 40+30 L on the same frames

Dimensions

Left suitcase interior

451 x 227 x 381

Length × depth × height

Left suitcase external dimensions

498 x 268 x 408

Mounted accessories included

Right suitcase interior

451 x 227/167 x 381

The two measurements are the upper part and the lower part.

Right suitcase external dimensions

498 x 244/208 x 408

Mounted accessories included

Closure

Lock

By key

Five-pin tumbler cylinder, removable and replaceable

Water resistance

IP rating

Undeclared

LOBOO claims water and dust resistance without publishing a rating

Dati dichiarati dal produttore LOBOO. In caso di dubbio sulla compatibilità con la tua versione, contattaci prima dell'acquisto.

Telai JP603B e coppia di valigie in alluminio 35+30 L, per la sola 800 MT-X

All you need to know before ordering

Technical specifications, equipment, delivery, and warranty: find every detail, verified against official LOBOO documentation, below.

Description CFMOTO 800MT X Side Cases

Complete kit for CFMOTO 800 MT-X: a pair of JP603B side racks with mounting hardware, plus two PIKE TRACKER aluminum cases measuring 35 and 30 liters, in your chosen finish. One order, nothing else to match.

Check the version before ordering: this kit is for the 800 MT-X. The 800 MT has a different rear subframe and requires the JP601B racks, available on a separate page. The two codes are not interchangeable.

Why the two sides have different capacities

The right case holds 30 liters instead of 35 because it is shaped around the exhaust: this is the version LOBOO calls exhaust avoidance, with a recessed lower wall. This keeps the motorcycle from becoming wider than necessary on the hot side. The left case, without that constraint, retains its full 35-liter capacity.

Capacity and weight limit

LOBOO specifies a maximum load of 10 kg per side case. The pair weighs 11.6 kg empty, excluding the racks: 6 kg for the left case and 5.6 kg for the right.

  • Left P35L — internal dimensions 451 x 227 x 381 mm, external dimensions 498 x 268 x 408 mm
  • Right P30R — internal dimensions 451 x 227/167 x 381 mm, external dimensions 498 x 244/208 x 408 mm

The two measurements for the right case refer to the upper and lower sections, where it is recessed to clear the exhaust. These are dimensions provided by the manufacturer based on manual measurement, so some tolerance should be expected.

Construction

  • High-strength aluminum, with the lower corners protected by structural plastic bumpers
  • Key lock with a five-lever cylinder, removable and replaceable without changing the case
  • Scratch-resistant inner lining, fabric pocket in the left lid, and storage net on the right
  • Lid opening stop to prevent it from hitting the rack
  • 3M reflective inserts on the outer side
  • Finishes: polished silver or matte black

LOBOO states that the series is water- and dust-resistant, but does not publish an IP rating. We do not list one because it is not a manufacturer-certified specification.

What is not included

The top case and its rear plate are sold separately. The LR06 LED light with sensor is supplied by LOBOO only with the three-case set, so it is not included in this kit.

Alternatives for the same racks

The JP603B racks also accept the WANDERER semi-rigid cases with capacities of 40+30 liters, if you prefer a lighter solution. If you already have the racks, you can purchase only the cases from the PIKE TRACKER series page. However, LOBOO cases can only be mounted on LOBOO racks: they are not interchangeable with mounts from other brands.

Maintenance

Wash with a water jet held at least one meter away, using a neutral detergent, and dry immediately afterward. Avoid acidic or alkaline products. Make a note of the number stamped on the key: it is needed to have a duplicate made.

Why choose it
  • Complete system:JP603B frames and a pair of panniers in a single order.
  • PIKE TRACKER aluminum panniers:keyed locks and waterproof seals.
  • Two finishes:black or silver, with the same construction.
  • Specific for the 800 MT-X:the MT has a dedicated kit on a separate page.
Who is it recommended for

Check the version:this kit is for the CFMOTO 800 MT-X. For the 800 MT, there is a dedicated kit with JP601B frames, on a separate page.

  • If you already have JP603B frames:purchase only the cases from the PIKE TRACKER series page.
  • If you prefer semi-rigid bags:the same frames fit the 40+30 liter WANDERER bags.
Documents and manufacturer

Assembly and Notes

  • The kit includes side racks and a pair of panniers: the top case is not included.
  • Observe the maximum load per side rack indicated by CFMOTO in the motorcycle's manual.
  • Recheck the tightening of all fasteners after the first 100-200 km and periodically with off-road use.
  • The load must not obstruct the license plate and taillights or extend beyond the limits set by the Highway Code.

Key Specifications

  • Quantity: 3 PCS

  • Water resistance: Waterproof IP68

  • Colors: BLACK or SILVER

  • Material: Steel

  • Material: Aluminum

How does it work, in detail?

Complete system for the 800 MT-X

Complete system for the 800 MT-X

JP603B frames plus the pair of PIKE TRACKER aluminum cases, in your chosen finish: everything compatible in a single order.

Check your motorcycle’s version: this kit is for the 800 MT-X, not the 800 MT, which requires the JP601B frames.

MT-X or MT: verification comes first

MT-X or MT: verification comes first

The two CFMOTO models look very similar, but the subframes are different. This kit fits the JP603B and is for the 800 MT-X; the 800 MT requires the JP601B.

The part numbers are not interchangeable. This is the most likely ordering mistake for this motorcycle, and it can be avoided by checking the registration document.

Why 35 on the left and 30 on the right?

Why 35 on the left and 30 on the right?

On the right side of the 800 MT-X, the exhaust runs alongside it. The narrower pannier leaves the necessary space and prevents the motorcycle from becoming wider on that side.

The panniers are aluminum PIKE TRACKER cases, with keyed locks and waterproofing.

Frames included, and the road remains open

Frames included, and the road remains open

The JP603B frames are part of the order: you don’t need to look for them separately or risk getting the code for the 800 MT.

If you prefer semi-rigid panniers in the future, the same frames support the 40+30-liter WANDERER panniers: you change the cases, not the structure. Compatibility with the Wanderer panniers is something we verify, based on the 18 mm tube requirement that LOBOO specifies for those panniers.

FAQs

For more information, please see our FAQ.

Do they also fit the standard 800 MT?

No. These JP603B frames are designed for the CFMOTO 800 MT-X. The 800 MT requires the JP601B frames, available on a separate page: the two motorcycles have different frames, and the part numbers are not interchangeable.

Can I mount the panniers on the frames I already have?

No. The PIKE TRACKER units attach only to LOBOO frames: mounts from other brands do not have the same attachment points. The JP603B frames, in turn, mount to the points provided on the motorcycle, without drilling.

Do the two suitcases have the same key?

The locks have removable and replaceable cylinders. Make a note of the number stamped on the key: you’ll need it if you want a copy or need to replace a cylinder.

How much wider does the motorcycle get?

The external dimensions of each suitcase, including the mounted accessories, are 498 mm in length and 408 mm in height; the width is 268 mm on the left and 244 mm on the right at the top. The total width then depends on how far the frames extend from the motorcycle.

Do they keep water out in the rain?

LOBOO claims water and dust resistance, but does not publish an IP rating, and we will not invent one. For a long trip, the usual precaution is worthwhile: keep electronics and documents in a dry bag inside your suitcase.

How much weight can I load?

The stated limit is 10 kg per side case. Exceeding it, together with the vibrations from riding, puts stress on frames and mounts.

Does installation require drilling or modifications to the motorcycle?

No drilling. On frames in this series, the manual generally calls for removing some original components around the tail section before installation. These are reversible procedures, using the supplied hardware. Follow the instructions in the manual included in the package.

Should I also install the top case?

The dedicated rear plate for the 800 MT-X is required and is not included in this kit. Write to us and we will check availability and the correct part number.

Can I switch to semi-rigid ones later?

Yes. The same JP603B frames support the 40+30-liter semi-rigid WANDERER panniers, so the choice remains open even after installation. Wanderer compatibility is our own verification, based on the 18 mm tube required by those panniers.

Is the product covered by a warranty?

Yes: all LOBOO products sold on Endurrad are covered by the 24-month statutory consumer warranty. In the event of a lack of conformity, we will handle the claim with the manufacturer.

Can I return the product if it isn’t suitable?

Yes, you are entitled to return the item within 14 days of delivery under online purchase regulations. The product must be intact and in its original packaging: contact us and we’ll guide you through the process.

How does shipping work?

Tracked shipping throughout Italy: the product is carefully inspected and prepared before leaving our warehouse. The mounting accessories included in the original package are included.

Can I pay in installments?

Yes: at checkout, installment payment services are available directly among the payment methods, with no additional paperwork.

Is it an original LOBOO product?

Yes: we sell exclusively original LOBOO products, new and in the packaging provided by the manufacturer, with official documentation.

Didn't find the answer you were looking for?

Do not hesitate to contact us

Buying guides, technical comparisons, and news on adventure motorcycle accessories

Before choosing

View all

Coppia di riser manubrio LOBOO montati su BMW R 1300 GS, finitura anodizzata argento

Riser manubrio moto: quale rialzo scegliere per la tua moto

Rialzo o arretramento? La gamma completa dei riser manubrio LOBOO per BMW GS, KTM, Honda, Triumph e altre adventure: misure dichiarate, prezzi reali e il controllo da fare sempre dopo il montaggio.

Read moreabout Riser manubrio moto: quale rialzo scegliere per la tua moto

Triumph Tiger 900 Rally Pro, base della Desert Edition 2026, equipaggiata con valigie laterali LOBOO Pike Tracker

Triumph Tiger 900 and 1200 Alpine and Desert Edition: what’s the difference between the two

Triumph adds the Alpine and Desert Editions to the Tiger 900 and 1200 lineup: standard suspension, wheels, and protection equipment differ. Here are the actual differences, official prices in Italy, and what to add for touring.

Read moreabout Triumph Tiger 900 and 1200 Alpine and Desert Edition: what’s the difference between the two

Moto adventure touring allo stand di una casa motociclistica al Motor Bike Expo di Verona

Motor Bike Expo 2027 in Verona: dates, tickets, halls, and why you should go

Motor Bike Expo 2027 takes place from January 22 to 24 at Veronafiere. Opening hours, tickets, halls, outdoor areas, guests, and the figures from the 2026 edition, presented by Endurrad, an exhibitor in Verona since 2025.

Read moreabout Motor Bike Expo 2027 in Verona: dates, tickets, halls, and why you should go