• Garagela tua moto e solo gli accessori compatibili
  • −5%Benvenuto nel Garage5% for anyone who saves the motorcycle in the app, until 06/30/2027
  • Cerca con una fotol'app riconosce la tua moto
  • Diario mototagliando, revisione, bollo
  • Avvisaminotifica quando un prodotto torna disponibile
  • −5%Primo ordinefatto dall'app
  • Vedi in 3De sulla tua moto, in realtà aumentata
Scarica su App Store Disponibile su Google Play Download

Free shipping on orders over €100 · 14-day returns

CFMOTO 800 MT side case frames - ENDURRADCFMOTO 800 MT side case frames - ENDURRADCFMOTO 800 MT Side Cases - ENDURRADCFMOTO 800 MT Side Cases - ENDURRADCFMOTO 800 MT side cases - ENDURRADCFMOTO 800 MT side case frames - ENDURRADCFMOTO 800 MT side case frames - ENDURRADCFMOTO 800 MT Side Case Frames - ENDURRADCFMOTO 800 MT Side Cases - ENDURRAD
-10%Pre-ordine
65 L Total volume
10 kg Maximum weight per suitcase
11,6 kg Weight of the pair of suitcases
JP601B Side frames

Panoramica

In breve

Complete system

JP601B frames and a pair of cases in one order.

PIKE TRACKER aluminum cases

keyed locks and waterproof.

Two finishes

black or silver, with the same construction.

Specific for the 800 MT

the MT-X has a dedicated kit on a separate page.

Leggi la descrizione completa

Complete kit for CFMOTO 800 MT: the pair of JP601B side frames with mounting hardware, plus the two PIKE TRACKER aluminum cases of 35 and 30 liters, in the selected finish. One order, nothing else to match.

Check the version before ordering: this kit is for the 800 MT. The 800 MT-X has a different rear subframe and requires the JP603B frames, on a separate page. The two codes are not interchangeable.

Why the two sides have different capacities

The right case holds 30 liters instead of 35 because it is shaped around the exhaust: this is the version LOBOO calls exhaust avoidance, with a recessed lower wall. This keeps the motorcycle from being wider than necessary on the hot side. The left side, without that constraint, retains its full 35-liter capacity.

How much it holds and how much it can weigh

LOBOO specifies a maximum load of 10 kg per side case. The pair weighs 11.6 kg empty, excluding the frames: 6 kg for the left case and 5.6 kg for the right.

  • Left P35L — internal dimensions 451 x 227 x 381 mm, external dimensions 498 x 268 x 408 mm
  • Right P30R — internal dimensions 451 x 227/167 x 381 mm, external dimensions 498 x 244/208 x 408 mm

The two measurements for the right case refer to the upper and lower sections, where it recesses around the exhaust. These are measurements provided by the manufacturer based on manual measurement, so some tolerance should be expected.

Construction

  • High-strength aluminum, with the lower corners protected by structural plastic bumpers
  • Key lock with a five-disc cylinder, removable and replaceable without changing the case
  • Scratch-resistant inner lining, fabric pocket in the left lid, storage net on the right
  • Lid opening stop to prevent it from hitting the frame
  • 3M reflective inserts on the outer side
  • Finishes: polished silver or matte black

LOBOO states that the series is water- and dust-resistant, but does not publish an IP rating: we do not include one because it is not a manufacturer-certified specification.

What is not included

The top case and its rear plate are sold separately. Each case has its own sensor light in the lid: the kit includes two, one for each side.

Alternatives for the same frames

The JP601B frames also accept the WANDERER semi-rigid cases with 40+30-liter capacity, if you prefer a lighter solution. If you already have the frames, you can purchase only the cases from the PIKE TRACKER series page. However, LOBOO cases fit only LOBOO frames: they are not interchangeable with mounts from other brands.

Maintenance

Wash with a water jet held at least one meter away, use a neutral detergent, and dry immediately afterward. Avoid acidic or alkaline products. Make a note of the number stamped on the key: it is needed to have a duplicate made.

Nella confezione

  • ✅ The complete, original, and new LOBOO kit, in manufacturer's packaging.
  • 📦 Included: JP601B pair of side frames, PIKE TRACKER P35L and P30R aluminum pannier pair, locks with keys, and mounting hardware.
  • ⚠️ Not included: the top case. Top case and rear plate are purchased separately.
  • 🔒 Closed system: LOBOO panniers mount exclusively on LOBOO frames. By purchasing the kit, you already have the correct combination, without adapters.
  • 🏍️ Check the version: this kit is for the 800 MT. For the 800 MT-X, the kit with JP603B frames is needed, on a separate page.
  • ↔️ Asymmetrical configuration, 35 liters on the left and 30 on the right: the narrower right pannier provides space for the exhaust.
  • 🚚 Tracked shipping throughout Italy, with product inspection before dispatch.
  • 🛡️ 24-month legal warranty for the consumer, according to current regulations.
  • 💳 Payment also in installments with services available at checkout.
  • 🔧 Respect the indicated tightening torques and recheck fastenings after the first few kilometers, especially with loaded panniers.
BLACK or SILVERColors
SteelMaterial
AluminumMaterial

JP601B – only for CFMOTO 800 MT – the MT-X requires JP603B

How does it work in detail

Materials, construction, and everyday use: every aspect explained one by one.

Frames and cases in a single order
01

Frames and cases in a single order

The complete system for the CFMOTO 800 MT: JP601B frames plus the pair of PIKE TRACKER aluminum cases, in the selected finish.

Check your motorcycle’s version: this kit is for the 800 MT, not the 800 MT-X, which requires the JP603B frames.

MT or MT-X: verification comes first
02

MT or MT-X: verification comes first

The two CFMOTO models look very similar, but their mounting frames are different. This kit fits the JP601B frames and is for the 800 MT; the MT-X requires the JP603B.

The codes are not interchangeable. This is the most likely ordering mistake for this motorcycle, and it can be avoided by checking the registration document.

Why 35 on the left and 30 on the right?
03

Why 35 on the left and 30 on the right?

On the right side of the 800 MT, the exhaust runs alongside it. The narrower pannier leaves the necessary space and prevents the motorcycle from becoming wider on that side.

It’s a design choice, not a limitation of the range.

Aluminum, key locks, waterproofness
04

Aluminum, key locks, waterproofness

PIKE TRACKER cases are made of high-strength aluminum alloy, with perimeter seals and key locks on every case.

It is the most popular series in the LOBOO range, for which it is easiest to find components and accessories over time.

The JP601B frames are included.
05

The JP601B frames are included.

You don't need to search for them separately: the steel frame is included in the order and is mounted at the attachment points provided by the manufacturer.

If you already have the frames installed, you can purchase just the cases from the PIKE TRACKER series page.

Black or silver, and the road remains open
06

Black or silver, and the road remains open

The two finishes make no technical difference: same aluminum, same locks, same durability. The choice is purely aesthetic.

If you prefer the semi-rigid cases in the future, the same frames accommodate the 40+30-liter WANDERER cases: you change the cases, not the structure.

Scheda tecnica

Specifiche tecniche

Tutti i dati

Capacity

Settings
35+30 L Asymmetrical: the right side leaves room for the exhaust pipe
Total volume
65 L 35 L on the left, 30 L on the right

Kit contents

Side frames
JP601B Included. Only 800 MT, not MT-X
Suitcases
P35L + P30R Aluminum PIKE TRACKER, top case not included

Compatibility

Motorcycle
CFMOTO 800 MT The MT-X requires the kit with JP603B frames.
Semi-rigid alternative
BCB4030TBK WANDERER 40+30 L on the same frames

Dimensions

Left suitcase interior
451 x 227 x 381 mm Length × depth × height
Left suitcase external dimensions
498 x 268 x 408 mm Mounted accessories included
Right suitcase interior
451 x 227/167 x 381 mm The two measurements are the upper part and the lower part.
Right suitcase external dimensions
498 x 244/208 x 408 mm Mounted accessories included

Closure

Lock
By key Five-pin tumbler cylinder, removable and replaceable

Water resistance

IP rating
Undeclared LOBOO claims water and dust resistance without publishing a rating

Prima di ordinare

Montaggio e requisiti

Come si monta

  1. Distinta dei telai: 13 voci per 26 pezzi, con telaio sinistro, telaio destro, traversa inferiore, distanziali di due altezze (25 e 33 mm), viteria M8 in cinque lunghezze, 8 rondelle, 2 tappi e il frenafiletti.
  2. Coppia di serraggio: 22 N·m, uguale su tutte le viti M8.
  3. Due viti sono in pezzo singolo, la M8×30 e la M8×35: segui lo schema invece di distribuirle a occhio.
  4. Le valigie si agganciano ai telai a sgancio rapido, senza attrezzi, e si montano solo su telai LOBOO.
Istruzioni complete e note di sicurezza

Il kit comprende i telai laterali JP601B e la coppia di valigie. I telai si montano in tre passaggi, tutti di installazione: non si smonta nulla della moto e non si fora.

  • Distinta dei telai: 13 voci per 26 pezzi, con telaio sinistro, telaio destro, traversa inferiore, distanziali di due altezze (25 e 33 mm), viteria M8 in cinque lunghezze, 8 rondelle, 2 tappi e il frenafiletti.
  • Coppia di serraggio: 22 N·m, uguale su tutte le viti M8.
  • Due viti sono in pezzo singolo, la M8×30 e la M8×35: segui lo schema invece di distribuirle a occhio.
  • Le valigie si agganciano ai telai a sgancio rapido, senza attrezzi, e si montano solo su telai LOBOO.

Il produttore chiede di non serrare a fondo durante il montaggio: si presentano i pezzi, si completano le regolazioni e solo alla fine si dà la coppia in sequenza, con una chiave dinamometrica.

Assembly and Notes

  • The kit includes side racks and a pair of panniers: the top case is not included.
  • Observe the maximum load per side rack indicated by CFMOTO in the motorcycle's manual.
  • Re-check the fasteners after the first 100-200 km and periodically with off-road use.
  • The load must not obstruct the license plate and tail lights or extend beyond the limits of the Highway Code.

Check the version:this kit is for the CFMOTO 800 MT. For the 800 MT-X, there is a dedicated kit with JP603B frames, on a separate page.

  • If you already have JP601B frames:purchase only the cases from the PIKE TRACKER series page.
  • If you prefer semi-rigid bags:the same frames accept 40+30 liter WANDERER bags.

Per moto Cfmoto

CFMoto
Hai un dubbio sulla compatibilità?Mandaci una foto su WhatsApp: ti rispondiamo noi. Scrivici →

Recensioni

5,0
★★★★★1 recensioni
5★1
4★0
3★0
2★0
1★0
Gaetano iannitto13/05/2025
★★★★★

Ottimo

Prodotto di qualità con finiture di alto livello

Domande frequenti

Le domande che ci fate più spesso

Are they also compatible with the 800 MT-X?

No. These JP601B frames are designed for the CFMOTO 800 MT. The 800 MT-X requires the JP603B frames, available on a separate page: the two motorcycles have different frames, and the codes are not interchangeable.

Is the product covered by a warranty?

Yes: all LOBOO products sold on Endurrad are covered by the 24-month statutory consumer warranty. In the event of a lack of conformity, we will handle the claim with the manufacturer.

Can I return the product if it isn’t suitable?

Yes, you are entitled to return the item within 14 days of delivery under online purchase regulations. The product must be intact and in its original packaging: contact us and we’ll guide you through the process.

How does shipping work?

Tracked shipping throughout Italy: the product is carefully inspected and prepared before leaving our warehouse. The mounting accessories included in the original package are included.

Can I pay in installments?

Yes: at checkout, installment payment services are available directly among the payment methods, with no additional paperwork.

Is it an original LOBOO product?

Yes: we sell exclusively original LOBOO products, new and in the packaging provided by the manufacturer, with official documentation.

Avvisami quando disponibile

Ti scriviamo appena CFMOTO 800 MT Side Cases (Silver/Black) torna disponibile.
  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
G
Gaetano iannitto
Ottimo

Prodotto di qualità con finiture di alto livello