40+40 L Semi-Rigid Luggage Kit with Racks for BMW R 1300 GS Adventure - Wanderer

Yes. The kit includes the LOBOO JP151B side frames, designed for the BMW R 1300 GS Adventure, along with two 40 L panniers and two 20 L waterproof bags. You don’t need to purchase anything else to mount the panniers.

The Adventure has the larger fuel tank and a differently shaped rear subframe, and requires the JP151B frames—the ones in this kit. The standard GS, on the other hand, requires the JP131B: the two are not interchangeable.

If you're unsure, send us the license plate number or the year and version listed on the registration document. We'll confirm it before purchase so you can avoid a return.

No. On the R 1300 GS Adventure, the WANDERER cases are mounted with the LOBOO JP151B side frames, included in this kit. The original BMW frames and the R 1300 GS JP131B frames are not compatible.

The frame arrives in two halves, a left and a right, joined by a rear crossmember. The parts list contains seventeen items and includes the two lateral reinforcement brackets, support plates, spacers, hardware, and washers.

They have the same capacity, but they are not the same item: according to the manual, they are two distinct codes, one for the left side and one for the right side, with mirrored mounting hardware. The kit already includes the correct pair.

Yes. The frame is specific to the motorcycle, but the cases are not: WANDERER cases attach to any frame with an 18 mm diameter tube. On Endurrad, you can also find the cases alone, without frames.

Yes. The frames in this kit are the same ones used for the PIKE TRACKER aluminum cases on the R 1300 GS Adventure: if you want to change the type of case in the future, the frame stays in place.

The manual specifies a single value for the entire kit: 18 Nm, for all three screw lengths listed in the bill of materials (M8×20, M8×25, and M8×40). A torque wrench is required.

The manual requires completing all adjustments first with the screws only loosely fitted, and tightening them to the specified torque in sequence only at the end.

No, regarding the hardware: screws, washers, spacers, and threadlocker are included with the frames, as listed in the manual's parts list. Tools are not included: to achieve the specified 18 N·m, a torque wrench is required.

Yes. The frame and luggage manuals are published in eight languages, including Italian, with the warnings translated and every step illustrated with photographs. The PDF can be downloaded from this page.

Yes. The two waterproof bags are dual-purpose: use them inside to organize your luggage, or attach them on top of the panniers with the quick-release straps when you need extra capacity for a long leg.

For the same volume, Wanderer cases weigh less, do not suffer permanent dents after a fall, and have no rigid edges. On the other hand, an aluminum suitcase provides a more rigid surface for securing heavy loads.

According to the LOBOO panels, each BCB40T case weighs 5.9 kg and each 20 L bag weighs 1 kg: approximately 13.8 kg in total. The weight of the JP151B frames is not specified.

Eighteen steps illustrated in the manual, with no drilling: remove the seat, original luggage rack, and some tail sections, secure the plates, brackets, and frames, and install the crossbar. Tighten all M8 bolts to 18 N·m using the included threadlocker; once the work is complete, the original parts go back in place.