Can I install plastics in a different color or from a different series?

Yes. The plastic guards can be replaced separately using code STM-003, in black or white. Other Barkbusters plastic guard series can also be mounted on the brackets; the only exception is the EGO, which has its own mounting system.

What is the difference between STM-001 and STM-002?

Only the handlebar diameter differs: the STM-001 is for straight 22 mm handlebars, while the STM-002 is for 25.4 mm handlebars, that is, one inch. Everything else is identical.

And compared with the bar-end versions, STM-005 and STM-007?

Change the anchor point. The STM-001 attaches with a clamp to the straight section of the handlebar and leaves the end free; the STM-005 and STM-007, on the other hand, anchor inside the end of the handlebar, on hollow and threaded handlebars respectively. All three remain single-point mounts, so they provide no impact protection.

Can I adjust the handguard's angle?

Partly: the manufacturer provides several mounting positions for the bracket, so there is room to orient the handguard in relation to the handlebar and controls.

What are the tightening torques?

10 Nm for M6 fasteners. Barkbusters recommends a medium-strength threadlocker on all fasteners and asks you to check the tightening again after the first 50 km.

Is it suitable for winter use on the motorway?

This is exactly its area of expertise. The STORM plastic one is the largest in the range, 275 by 140 mm, and the manufacturer says it is designed to provide excellent protection from wind and cold. What it does not do is protect you in a fall.

Paramano completo Barkbusters STORM STM-001 nero a punto singolo con morsetto da 22 mm

Paramani Barkbusters STORM STM-001 montati su una Triumph Street Triple

Paramano Barkbusters STORM STM-001, vista del morsetto e della staffa a L

Paramano Barkbusters STORM STM-001 nero, vista di prodotto

Disegno quotato della plastica paramano Barkbusters STORM: 275 mm di lunghezza e 140 mm di altezza

22 mm Handlebar

18 mm Free space

1 Attachment point

BARKBUSTERS ✓ Prodotto originaleCod. BR-STM-001-00-BK

Barkbusters STORM STM-001 full handguards, single-point, 22 mm handlebar

€110,00

Paga in 3 rate da €36,66 senza interessi

Va bene per la tua moto?

Accessorio universale: va su qualsiasi moto adventure e touring.

Configuration

Single dot 22 mm, black

Disponibile, pronto per la spedizione🚚 Consegna in 5 giorni lavorativi

Spedizione gratuitaoltre 100 € in Italia

Reso entro 14 giornidalla consegna

Garanzia 24 mesigaranzia legale

Pagamento sicurocarte, PayPal e Klarna

Dubbi sulla compatibilità? Scrivici, ti rispondiamo noi. WhatsApp

Panoramica

In breve

Kit completo a punto singolo. Protezione dalle intemperie, non dagli impatti.

La copertura più estesa della gamma.

275 per 140 mm di plastica: nessun altro paramano Barkbusters ripara di più da vento e freddo.

Non tocca l'estremità del manubrio.

Contrappesi originali al loro posto, manopole intatte, nessun espansore da infilare nel tubo.

Kit completo.

Plastiche, staffe, morsetti e viteria in una confezione.

Fissaggio universale.

Contano il diametro del manubrio e lo spazio libero, non marca e modello della moto.

Plastiche sostituibili.

Si cambiano da sole con il codice STM-003, nero o bianco.

Dal produttore BARKBUSTERS

Barkbusters è un marchio di Rideworx Pty Ltd, azienda australiana che progetta e produce paramani per moto dal 1984. La gamma è costruita su un principio preciso: la struttura di montaggio e le plastiche di protezione restano due articoli distinti, così che le seconde siano sostituibili e intercambiabili sulla stessa struttura.

Il produttore distingue sempre due configurazioni di fissaggio: due punti, indicato per la protezione dagli impatti, e punto singolo, indicato solo per la protezione da vento e intemperie. La STM-001 appartiene alla seconda, e Barkbusters lo dichiara esplicitamente sulla scheda del prodotto.

Leggi la descrizione completa

The STM-001 is the complete handguard from the STORM series in the single-point clamp version, for straight 22 mm handlebars. Everything is included: black STORM plastics, brackets, clamps, and hardware.

Protects against the elements, not impacts

This is the most important thing to know, and Barkbusters states it without qualification: this product is designed solely for protection against the elements and NOT for impact protection. The handguard attaches to the handlebar at only one point and is not anchored at the end: the triangle that absorbs the impact is missing.

If what you are looking for is lever protection in a fall, the correct choice is a two-point model: the JET-001 for the same handlebar, or a kit specific to your motorcycle.

Measure 18 mm before ordering

The manufacturer requires 18 mm of straight, unobstructed handlebar inward from the controls: this is the space occupied by the clamp. Measure with a ruler from the inner edge of the control block toward the centre of the handlebar. If you have less than 18 mm of clear space, this handguard cannot be fitted, and no adapter will solve the problem.

On the other hand, the handlebar end remains free: the original bar-end weights stay in place and the grips do not need to be cut. This is the practical advantage of the clamp compared with systems that anchor inside the handlebar.

Stated compatibility

Requirement	Value
Handlebar	Straight 22 mm (7/8")
Clear space inward	At least 18 mm
25.4 mm handlebar	STM-002 required

It is a universal kit: you do not need a code for the make, model, and year. Barkbusters states compatibility for vehicles in their original factory configuration.

What you will find in the package

Two black STORM plastics, right and left.
Two L-shaped brackets, one right and one left.
Two clamp and U-bolt sets for 22 mm handlebars.
Complete hardware: button-head screws, mushroom-head screws, self-locking nuts, and washers.

What is NOT included

Nothing essential: the kit is complete. If you need replacement plastics someday, the code is STM-003.

Installation

Specified torque: 10 Nm for the M6 hardware. The manufacturer provides several bracket mounting positions, giving you room to orient the handguard. Check the operation of the throttle, front brake, clutch, and engine stop switch before setting off, and recheck the tightening after the first 50 km.

Why buy it from Endurrad

Free shipping in Italy above €100 and in Europe above €250, returns within 14 days, and support in Italian. If you are not sure you have 18 mm of clear space, send us a photo of the handlebar before ordering.

Nella confezione

Plastiche STORM nere — coppia destra e sinistra, già incluse nel kit.
Staffe a L — una destra e una sinistra, che reggono la plastica a sbalzo.
Morsetti e cavallotti — due set per manubrio dritto da 22 mm.
Viteria completa — viti, dadi autobloccanti e rondelle: undici voci a distinta in tutto.
Protezione dagli impatti non dichiarata — il produttore indica questo prodotto per le sole intemperie: per il riparo in caduta servono i modelli a due punti.

STM-001 · Complete kit · Single clamp point · Straight 22 mm handlebar

Before ordering, measure 18 mm

The clamp requires 18 mm of straight, unobstructed handlebar space inward from the controls. This is what determines whether it can be installed.

Single point: what does it mean?

The L bracket starts from a clamp on the straight section of the handlebar and supports the plastic as a cantilever: a single anchor point, without the second point at the end. This is why Barkbusters specifies this product for weather protection only, not for impacts.

Mounted on a Triumph Street Triple

Here you can see the actual clearance on a naked bike: the STORM covers the hand well without obstructing the controls, and the end of the handlebar remains clear with the original bar-end weights in place.

The most extensive coverage in the range

275 mm long by 140 mm high: the STORM plastic is the largest in the Barkbusters range. For comparison, the VPS is 250 by 105 and the JET is 245 by 110. It is the road and cold-season handguard, where protection matters more than lightness.

Grips and bar-end weights stay where they are

The clamp mount works only on the straight section: the handlebar end is not touched. No grips to cut, no bar ends to remove, no expanders to insert into the tube. In return, 18 mm of free handlebar space toward the inside is required.

Scheda tecnica

Specifiche tecniche

Tutti i dati

Structure and materials

Type

Complete single-point handrail STORM frame and plastics included

Structure

L brackets and clamps with U-bolt

Plastics

STORM black crescent moon-shaped magnet Included, replaceable with code STM-003

Plastic length

275 mm

Plastic height

140 mm

Production

Australia Rideworx Pty Ltd

Assembly

Handlebar

Straight 22 mm 22 mm straight section, equivalent to 7/8 inch

Required free space

18 mm From the straight handlebar to the inside edge of the controls: measure before ordering

Mounting type

Single point Clamp on the straight section, handlebar end free

Mounting positions

Optional The manufacturer provides multiple bracket mounting positions

Torque pairs

M6 10 Nm

Retightening check

after 50 km Manufacturer-recommended medium-strength threadlocker

Protection

Impact protection

NOT declared Barkbusters declares that this product is designed solely for protection from the elements

Coverage

Extended Wind and cold protection, the widest in the Barkbusters range

Declared use

Street, cruiser, naked, adventure, and scooter

Packaging

Content

11 line items in the bill of materials STORM plastics, right and left L brackets, two clamp and U-bolt sets, screws and washers

Color

Black

Dati dichiarati da Barkbusters (Rideworx Pty Ltd) sulla pagina ufficiale del codice STM-001, sul disegno quotato della serie STORM e sulle istruzioni di montaggio INS-STM-001. Il peso non è dichiarato dal produttore.

Manuale d'usoDocumento originale BARKBUSTERS Scarica ↓

Prima di ordinare

Montaggio e requisiti

Come si monta

Verifica di avere almeno 18 mm di manubrio dritto e libero verso l'interno rispetto al blocchetto comandi.
Monta il morsetto con il suo cavallotto sulla sezione dritta, senza serrare.
Fissa la staffa a L al morsetto, scegliendo fra le posizioni di montaggio previste quella che orienta meglio il paramano. Le staffe sono marcate destra e sinistra.
Fissa la plastica STORM alla staffa con le viti a testa fungo.
Serra tutto a 10 Nm per la viteria M6.
Controlla il funzionamento di gas, freno anteriore, frizione e interruttore di arresto prima di partire.
Ricontrolla il serraggio dopo i primi 50 km.

Istruzioni complete e note di sicurezza

Procedura dichiarata da Barkbusters nelle istruzioni ufficiali INS-STM-001, allegate a questa scheda.

Verifica di avere almeno 18 mm di manubrio dritto e libero verso l'interno rispetto al blocchetto comandi.
Monta il morsetto con il suo cavallotto sulla sezione dritta, senza serrare.
Fissa la staffa a L al morsetto, scegliendo fra le posizioni di montaggio previste quella che orienta meglio il paramano. Le staffe sono marcate destra e sinistra.
Fissa la plastica STORM alla staffa con le viti a testa fungo.
Serra tutto a 10 Nm per la viteria M6.
Controlla il funzionamento di gas, freno anteriore, frizione e interruttore di arresto prima di partire.
Ricontrolla il serraggio dopo i primi 50 km.

Frenafiletti di media resistenza su tutti i fissaggi. Il produttore considera il montaggio dei paramani un intervento rilevante per la sicurezza, da affidare a un tecnico se non hai dimestichezza.

A chi gira su strada, in città o in autostrada e vuole il massimo riparo da vento, freddo e pioggia su un manubrio dritto da 22 mm.

A chi non vuole toccare manopole e contrappesi: il morsetto lavora solo sulla sezione dritta.

Non è la scelta giusta per chi cerca protezione della leva in caduta, e nemmeno per chi ha meno di 18 mm di manubrio libero verso l'interno rispetto ai comandi.

Compatibilità

Hai un dubbio sulla compatibilità?Mandaci una foto su WhatsApp: ti rispondiamo noi. Scrivici →

Domande frequenti

Le domande che ci fate più spesso

Does it protect the lever in a fall?

No, and the manufacturer states it unequivocally: the STM-001 is designed solely for protection from the elements and NOT for impact protection. It attaches at just one point on the handlebar, without an anchor at the end. If you’re looking to protect the lever in a fall, choose two-point models such as the JET-001 or the motorcycle-specific BHG kits.

What is the 18 mm of clearance, and how do I measure it?

These are the millimeters of clear, straight handlebar space needed for the clamp, inward from the controls. Measure with a ruler from the inner edge of the control block toward the center of the handlebar: if you have less than 18 mm of clear space, the clamp will not fit. This is the check to perform before ordering.

Is the kit complete, or do I need to buy anything else?

It is complete. The package contains the black STORM plastics, the right and left L-brackets, the two clamp and U-bolt sets, and all the hardware: eleven items in the bill of materials.

Is the specific code for my motorcycle required?

No. The STM-001 has a universal mount: what matters is the handlebar diameter, 22 mm straight, and the 18 mm of clearance. You don't need the code linked to the make, model, and year as with the BHG and BLG kits.

Should I remove the bar ends or cut off the grips?

No, and that's the practical advantage of the single clamp mount: the handlebar end remains free, so the original bar-end weights stay in place and the grips don't need to be cut. Installation only affects the straight section.

What is the difference compared with the STM-001-NP version?

The NP version is the assembly kit only, without plastics: the official PDF explicitly states this and refers to code STM-003 to purchase them separately. This listing, however, is the complete set, including black STORM plastics.