JPT221W

Code

Single plate

Content

You are

Codes

790 and 890 Adventure

Motorcycle

Identification

Product code

JPT221W

Official name in the manual

Top Case Rack, PIKE / TIBET series

Compatibility

Motorcycle

KTM 790 Adventure and 790 Adventure R from 2019

Declared luggage series

PIKE TRACKER and TIBET

The CONQUEROR series is not mentioned in this manual

Matching side-case frame

JP221B, separate item

Package contents

Complete itemized list

4 sets of 10 pieces: 1 plate, 4 M8×40 screws, 4 M8 washers, 1 threadlocker

Assembly

Pair on M8×40 screws

22

Preliminary operation

The plastic part of the original luggage rack must be removed

Undeclared data

Material, weight and dimensions

Not declared by the manufacturer

Specifications declared by the manufacturer LOBOO. If in doubt about compatibility with your model, please contact us before purchasing.

The steel rack for mounting a LOBOO top case on the KTM 790 or 890 Adventure.

All you need to know before ordering

Technical specifications, equipment, delivery, and warranty: find every detail, verified against official LOBOO documentation, below.

Description KTM 790-890 Adventure Top Case Plate

The LOBOO JPT221W top case plate is the base to which the top case attaches, and it fits KTM 790 and 890 Adventure models, in both standard and R versions: the two motorcycles share the same chassis, while the engine differs.

Six compatible top cases

  • PIKE TRACKER P45T — P45T-BK, P45T-SL
  • PIKE TRACKER P36T — P36T-BK, P36T-SL
  • TIBET T36T — T36T-BK, T36T-SL

The P45T is the choice for those who want to fit a full-face helmet inside the top case, while the P36T and T36T keep the rear more compact.

The top case is not included: this page covers the plate only. It can be combined with the JP221B side frames, which remain a separate purchase.

Why choose it
  • Six compatible top cases: PIKE TRACKER P45T and P36T, TIBET T36T, in black or silver.
  • Dedicated mounting: on the manufacturer's designated mounting points.
  • Complementary to the side frames: the plate on the rear rack, the JP221B frames on the sides.
Who is it recommended for

The plate is the base to which the top case is attached: the top case is a separate item and is not included.

Compatible codes: P45T-BK, P45T-SL, P36T-BK, P36T-SL, T36T-BK, T36T-SL.

Documented compatibility: KTM 790 Adventure S and R from 2019. For the 890 Adventure, contact us for confirmation before purchasing.

Documents and manufacturer

Installation and Notes

  • Top case is not included in the delivery.
  • Observe the maximum load on the rear rack indicated by KTM: the limit includes the plate and loaded top case.
  • Recheck the tightening after the first 100-200 km.
  • The load must not cover the license plate and tail lights or extend beyond the limits of the Highway Code.

How does it work, in detail?

Six compatible top cases, PIKE TRACKER and TIBET

Six compatible top cases, PIKE TRACKER and TIBET

The plate provides access to six top-case codes: PIKE TRACKER P45T and P36T, and TIBET T36T, each available in black or silver. It is the base onto which the top case attaches, and must be purchased separately.

It works in combination with the JP221B side racks: the plate on the rear subframe, and the racks on the sides.

Six top cases to choose from

Six top cases to choose from

The top case accommodates six variants: PIKE TRACKER P45T and P36T, and TIBET T36T, each available in black or silver.

The P45T is the choice for those who want to store a full-face helmet in the top case, while the P36T and T36T keep the rear more compact.

One code for the 790 and 890 Adventure

One code for the 790 and 890 Adventure

KTM 790 and 890 Adventure share the same chassis: the engine differs, not the rear subframe. The plate fits both, in standard and R versions.

You don’t need to check which of the two you have: the part number is the same.

The top case is not included

The top case is not included

This page concerns the plate only: it is the base onto which the top case attaches, and it must be purchased separately.

It combines with the JP221B side frames, which are nevertheless a separate purchase.

The rear load has a specific limit.

The rear load has a specific limit.

KTM indicates a maximum load on the rear subframe: this includes the mounting plate, top case, and contents.

It is the highest and rearmost point of the load: exceeding it affects stability more than the same weight in the side cases.

License plate and lights must remain visible

License plate and lights must remain visible

After installation, check that the top case does not cover the license plate or rear lights and does not extend beyond the limits established by the Highway Code.

Recheck the fasteners after the first 100–200 km: the rear rack flexes significantly when carrying a moving load.

FAQs

For more information, please see our FAQ.

Which top cases does this plate accept?

Six codes: PIKE TRACKER P45T and P36T and TIBET T36T, each in a black or silver finish. The top case is not included and must be purchased separately.

Can I install the plate and side frames together?

Yes, they are complementary: the plate attaches to the rear rack for the top case, while the JP221B racks attach to the sides for the panniers. Together, they complete the luggage system. Always check the maximum loads specified by KTM in the owner’s manual.

Is the product covered by a warranty?

Yes: all LOBOO products sold on Endurrad are covered by the 24-month statutory consumer warranty. In the event of a lack of conformity, we will handle the claim with the manufacturer.

Can I return the product if it isn’t suitable?

Yes, you are entitled to return the item within 14 days of delivery under online purchase regulations. The product must be intact and in its original packaging: contact us and we’ll guide you through the process.

How does shipping work?

Tracked shipping throughout Italy: the product is carefully inspected and prepared before leaving our warehouse. The mounting accessories included in the original package are included.

Can I pay in installments?

Yes: at checkout, installment payment services are available directly among the payment methods, with no additional paperwork.

Is it an original LOBOO product?

Yes: we sell exclusively original LOBOO products, new and in the packaging provided by the manufacturer, with official documentation.

Didn't find the answer you were looking for?

Do not hesitate to contact us

Buying guides, technical comparisons, and news on adventure motorcycle accessories

Before choosing

View all

Honda XL750 Transalp 2026 in azione

Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

From 2026, the Honda XL750 Transalp comes with the E-Clutch as standard on both versions, full-power and A2, at the same price of €10,990. Official technical specifications, what really changes, and how to equip it for touring with Endurrad catalog accessories.

Read moreabout Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

Maxi enduro con numero di gara su una strada bianca dell'Appennino tra boschi autunnali durante il Transitalia Marathon

Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle

From September 25 to October 1, 2026, from Rimini to Termoli in four stages and over 1,000 km: dates, route, Complex, Plain and Road tracks, costs, permitted motorcycles, luggage rules, and a complete checklist for preparing the maxi enduro.

Read moreabout Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle

Coppia di riser manubrio LOBOO montati su BMW R 1300 GS, finitura anodizzata argento

Motorcycle handlebar risers: which height should you choose for your bike?

Rise or setback? The complete range of LOBOO handlebar risers for BMW GS, KTM, Honda, Triumph, and other adventure bikes: stated measurements, real prices, and the check you should always perform after installation.

Read moreabout Motorcycle handlebar risers: which height should you choose for your bike?