Can it withstand off-road vibrations?

That’s why it exists: a rigid, dedicated mount instead of a universal bracket that rotates on the tube. However, the manufacturer doesn’t publish the tightening torques, so check the tightness again after your first few rides on dirt roads.

What material is it made of?

SUS304 stainless steel, with a black sandblasted granular electrostatic finish that does not chip like traditional paint. It is not aluminum: if you find anything else indicated, it does not come from LOBOO documentation.

What finish does it have, and how does it hold up over time?

Black electrostatically applied sandblasted textured finish, which LOBOO describes as more durable than traditional paint because it does not chip. The SUS304 stainless steel underneath the finish does not rust.

How much does it weigh, and how wide is it?

515 g, equivalent to 1.14 lbs, for a width of approximately 429 mm. These are the specifications stated by LOBOO on the official CDZJ251 product page.

What kind of spotlights can I install on it?

LOBOO mentions fog or driving lights, without publishing a list of approved models or the mounting diameter. Before ordering, check the mount and dimensions of the light you have chosen; if you have any questions, contact us.

What’s in the package?

A bracket, with the mounting hardware included. No additional purchases are needed to attach it to the motorcycle: only the lights and their wiring are not included.

Are the spotlights included in the price?

Note: only the mounting bracket is included. Auxiliary spotlights, wiring, and any control units must be selected and purchased separately. They are shown in the images for illustrative purposes.

Spotlight Mount KTM 1290 Super Adventure R - Endurrad.com

-9%Consegna in 2-3 giorni lavorativi

515 g Weight

429 mm Width

SUS304 stainless steel Material

No drilling required Assembly

LOBOO ✓ Prodotto originaleCod. CDZJ251

LOBOO CDZJ251 Auxiliary Light Bracket for KTM 1290 Super Adventure R | SUS304 stainless steel, 515 g

€86,00 ~~€95,00~~Risparmi €9

Paga in 3 rate da €28,66 senza interessi

Va bene per la tua moto?

Progettato per: 1290 Super Adventure, 1290 Super Adventure R.

Disponibile, pronto per la spedizione🚚 Consegna in 2-3 giorni lavorativi

Spedizione gratuitaoltre 100 € in Italia

Reso entro 14 giornidalla consegna

Garanzia 24 mesigaranzia legale

Pagamento sicurocarte, PayPal e Klarna

Dubbi sulla compatibilità? Scrivici, ti rispondiamo noi. WhatsApp

Completa il montaggio

Spesso acquistati insieme

Scelti dal nostro team per questo prodotto

LOBOO CDZJ251 Auxiliary Light Bracket for KTM 1290 Super Adventure R | SUS304 stainless steel, 515 g (questo prodotto)

€86,00

Approved auxiliary motorcycle lights, 15,000 lumens, rotary control

€455,00

Totale per 2 accessori

Panoramica

In breve

Supporto dedicato per faretti ausiliari sulla KTM 1290 Super Adventure R dal 2022, dove la carenatura anteriore non lascia punti adatti. Porta le luci sotto il gruppo ottico, con un ancoraggio rigido in stile originale e senza forature.

Acciaio inossidabile SUS304 con finitura granulata nera sabbiata, 515 g per una larghezza di circa 429 mm. Il supporto è girevole, quindi l'angolo si corregge dopo il montaggio. Faretti e cablaggi non inclusi; la versione S non è fra i modelli indicati dal produttore.

Solves a series problem

the 1290 frame does not offer suitable points for auxiliary lights, and universal brackets vibrate and rotate.

SUS304 stainless steel

corrosion-resistant, with an electrostatic sandblasted black granulated finish that does not chip.

Non-destructive installation

no drilling, no cutting, no permanent modifications.

Protected position

the lights remain effective but protected, with an original style aesthetic.

Dal produttore LOBOO

Original LOBOO product, a brand specializing in adventure and touring motorcycle accessories. Official manufacturer documentation available upon request.

Leggi la descrizione completa

On the KTM 1290 Super Adventure R, the problem isn’t choosing auxiliary lights; it’s finding where to mount them: the front fairing leaves few options, and the improvised solution is universal brackets and vibrating zip ties that throw the beam out of alignment at the first rough stretch of road.

The LOBOO CDZJ251 mount provides a rigid, OEM-style anchoring point, developed—as the manufacturer states—using the vehicle’s data. The auxiliary lights mount under the headlight assembly, which is the position offering the best projection angle for nighttime riding.

The part is made of SUS304 stainless steel with a black, sandblasted electrostatic granular finish that does not chip like traditional paint. It weighs 515 g and is approximately 429 mm wide, and it is swiveling: the angle can be adjusted after installation without bending anything.

LOBOO states that installation is non-destructive, requiring no drilling or cutting of the motorcycle, and explicitly limits compatibility to the Super Adventure R from 2022 onward: the S version is not among the listed models.

Auxiliary lights and wiring are not included. The mount is the foundation; choose the lights separately based on the lumen output you need.

Nella confezione

✅ 1 supporto faretti LOBOO CDZJ251 in acciaio inox SUS304, finitura nera sabbiata
✅ Viteria di montaggio inclusa
⚠️ Faretti ausiliari non inclusi: nelle immagini compaiono a scopo dimostrativo
⚠️ Cablaggi, relè e centraline non inclusi
🏍️ Solo per KTM 1290 Super Adventure R dal 2022: la versione S non è indicata dal produttore
🔎 Quote dichiarate: 515 g, larghezza circa 429 mm

CDZJ251 – SUS304 stainless steel – 429 mm – 515 g

How does it work, in detail?

Materials, construction, and everyday use: every aspect explained one by one.

Solve the problem that the 1290 has as standard

On the Super Adventure R, the front fairing leaves few options for mounting auxiliary lights, and those who try end up with universal brackets and zip ties that vibrate and rotate.

The CDZJ251 provides a rigid, OEM-style mounting point, developed by LOBOO based on the vehicle’s data.

Move the spotlights under the headlight assembly

LOBOO indicates this position as the one with the best projection angle for night riding: the beam reaches far without being obstructed by the fairing.

The lights shown in the images are not included and are for illustrative purposes only.

Correct the angle after installation

The mount swivels: you can adjust the spotlight’s direction after installation is complete, without bending brackets or improvising with spacers.

This check should be done in the dark, with the motorcycle loaded as you actually use it, and repeated if you change the spotlights.

SUS304 stainless steel, not painted steel

LOBOO specifies SUS304 stainless steel with a black electrostatically sandblasted grain finish that does not chip like traditional paint.

515 grams for a width of approximately 429 mm: on a component exposed to salt, rain, and stones, the material matters more than the grams saved.

Check the version: only the R

LOBOO is explicit on this point: the support is designed for the KTM 1290 Super Adventure R from 2022 onward. The S version is not among the models specified by the manufacturer.

If you have a Super Adventure S, write to us before ordering instead of risking a return.

Dati dal manuale d'uso LOBOO

Specifiche tecniche

Tutti i dati

Identification

Product code

CDZJ251 LOBOO Name: swivel auxiliary light mount in SUS304

Compatibility

KTM 1290 Super Adventure R, from 2022 The S version is not indicated by the manufacturer

Capacity and measurements

Width

429 mm Approximately 16.89 inches

Weight

515 g 1.14 lbs

Materials

Material and finish

SUS304 stainless steel, electrostatically sandblasted black granulate Finish that won’t chip like traditional paint

Fastening and assembly

Spotlight position

Beneath the light cluster LOBOO indicates it as the best projection angle for nighttime driving

Adjustment

Swivel support The angle is adjusted after assembly

Installation

Non-destructive, no drilling required Developed using the vehicle’s original data, according to the manufacturer

Equipment

Package contents

1 support with included screws Spotlights, wiring, and control units not included

Data not provided by the manufacturer

Torque pairs

Undeclared LOBOO does not publish a manual dedicated to the CDZJ251

Stated specifications by manufacturer LOBOO. If in doubt about compatibility with your model, please contact us before purchasing.

Prima di ordinare

Montaggio e requisiti

Come si monta

Istruzioni complete e note di sicurezza

Il supporto si fissa nella zona sotto il gruppo ottico usando i punti previsti dalla moto: LOBOO dichiara uno sviluppo sui dati originali del veicolo e un'installazione non distruttiva, senza trapano né tagli.

A montaggio finito si orienta il faretto agendo sullo snodo girevole: conviene farlo al buio, con la moto carica come la usi davvero, e rifarlo se cambi faretti.

LOBOO non pubblica un manuale dedicato al CDZJ251 né le coppie di serraggio: ricontrolla il serraggio dopo le prime uscite, soprattutto con uso off-road.

Assembly and notes

Non-destructive installation on the points provided by the support: no drilling or cutting on the motorcycle.
The auxiliary lights must be oriented so as not to dazzle: their use on public roads is subject to the rules of the Highway Code.
Re-check the tightening after the first 100-200 km, especially with off-road use.
Spotlights and wiring not included.

You need this if with your KTM 1290 Super Adventure R:

You ride at night or at dawn and the stock headlights are not enough on unlit roads
You have already tried universal brackets and they came out of alignment on your first off-road trip
You want to keep your bike intact, without holes or permanent modifications

The spotlights are not included: the bracket is the base, the lights are chosen separately according to the desired lumens.

Per moto Ktm

KTM

Come verificare la compatibilità

KTM 1290 Super Adventure R (2022 in poi)

Hai un dubbio sulla compatibilità?Mandaci una foto su WhatsApp: ti rispondiamo noi. Scrivici →

Domande frequenti

Le domande che ci fate più spesso

Which motorcycle is the CDZJ251 compatible with?

With the KTM 1290 Super Adventure R from 2022 onward. LOBOO is explicit: the mount is designed specifically for the R version and uses the vehicle’s original data.

Is it also compatible with the 1290 Super Adventure S?

The manufacturer indicates only the R version and specifies that the mount is designed for it. We do not claim compatibility with the S: if you have one, contact us before ordering and we’ll check together.

Where are the spotlights installed?

Under the light assembly. LOBOO identifies this position as having the best projection angle for night riding, and the mount is designed to hold them there securely.

Do you need to drill or modify the motorcycle?

No. LOBOO states that installation is non-destructive, with no drilling or cutting, and was developed using the vehicle’s original data. Removing the mount returns the motorcycle to its stock configuration.

Can the beam angle be adjusted?

Yes: the mount swivels, so you can adjust the orientation after installation without bending the brackets. It’s best to do this in the dark and with the motorcycle loaded as you actually use it.

Is the installation reversible?

Yes: no drilling or cutting of the motorcycle. If you sell the KTM or want to return it to its original configuration, simply remove the mount.