• Garagela tua moto e solo gli accessori compatibili
  • −5%Benvenuto nel Garage5% for anyone who saves the motorcycle in the app, until 06/30/2027
  • Cerca con una fotol'app riconosce la tua moto
  • Diario mototagliando, revisione, bollo
  • Avvisaminotifica quando un prodotto torna disponibile
  • −5%Primo ordinefatto dall'app
  • Vedi in 3De sulla tua moto, in realtà aumentata
Scarica su App Store Disponibile su Google Play Download

Free shipping on orders over €100 · 14-day returns

Kit di montaggio paramani Barkbusters BHG-109 in alluminio a due punti di fissaggio per Honda CB 750 HornetBarkbusters BHG-109, dettaglio dell'ancoraggio all'estremità del manubrio con contrappeso inclusoBarkbusters BHG-109, dettaglio dei morsetti sulla sezione dritta del manubrioKit Barkbusters BHG-109 montato su Honda CB 750 Hornet con plastiche VPS, vendute separatamenteKit Barkbusters BHG-109 montato su Honda CB 750 Hornet con plastiche BBZ, vendute separatamente
2 Mounting points
Included Handlebar weights
4 series Compatible plastics

Panoramica

In breve

Contrappesi inclusi. Plastiche JET, VPS, STORM o CARBON a parte.

Protezione dagli impatti dichiarata.

Due punti di fissaggio e alluminio trattato termicamente.

Salva la leva nel ribaltamento da fermo.

Su una naked è il danno più frequente, e il più banale.

D inverno ripara anche dall aria.

Sulla Hornet, che non ha carena, con le plastiche giuste si sente.

Contrappesi già nella scatola.

Non serve comprarli né riutilizzare gli originali.

Quattro plastiche compatibili.

Dalla JET compatta alla STORM a copertura estesa, intercambiabili sulla stessa struttura.

Prodotto in Australia.

Barkbusters è un marchio di Rideworx Pty Ltd, che produce paramani dal 1984.

Dal produttore BARKBUSTERS

Barkbusters è un marchio di Rideworx Pty Ltd, azienda australiana che progetta e produce paramani per moto dal 1984.

Nata nell enduro australiano, la gamma copre oggi anche naked e stradali: la CB 750 Hornet ha il suo codice dedicato come una moto da fuoristrada, con gli stessi criteri di progetto.

Leggi la descrizione completa

The BHG-109 is the Barkbusters mounting kit designed around the handlebar geometry of the Honda CB 750 Hornet from 2023 onward. It is the aluminum structure that supports the handguards: it protects levers, controls, and hands in low-speed crashes and stationary tip-overs, and stays on the bike even when you change the plastics.

As with the entire range, the protection structure and plastics are two separate products: here you are purchasing the structure only, with hardware and handlebar weights.

Key features

  • Two-point mounting — anchoring at the handlebar end plus a clamp on the straight section. This is the configuration the manufacturer specifies for impact protection.
  • Heat-treated aluminum bar, with a wraparound design and natural aluminum finish.
  • Handlebar weights included — they do not need to be purchased separately.
  • Clamps shaped for the Hornet, designed to work with the standard cables and electrical switchgear.
  • Interchangeable plastics — compatible with JET, VPS, STORM, and CARBON, each sold separately.
  • Made in Australia by Rideworx Pty Ltd.

Protection and use

On a road naked bike, handguards are not for branches: they are for what actually happens. A stationary tip-over in a parking lot, a low-speed slide when exiting a wet roundabout — in both cases, the first thing to hit the ground is the brake or clutch lever, and on a modern bike it is not a cheap part. With an aluminum bar anchored at two points, the structure takes the impact.

Then there is winter. The Hornet has no fairing, and anyone who rides it to work year-round knows what air on your hands feels like in January: paired with the plastics, the same structure also becomes a wind shield. The single-point configuration, the other option in the range, only does that second job: the manufacturer specifies it for wind and weather protection, not impacts.

Materials and construction

Heat-treated aluminum structure, a process the manufacturer uses to increase strength and impact absorption. The design wraps around the hand: it starts from the straight section of the handlebar, curves around the hand, and closes at the end.

Compatibility

Brand Model Years Barkbusters code
Honda CB 750 Hornet from 2023 onward BHG-109-NP

Compatibility declared by Barkbusters for motorcycles in original factory configuration. Aftermarket handlebars have different diameters and wall thicknesses: mounting must be checked before purchase. Unsure about your model? Contact us with the model and year.

The Hornet name is not enough. This code is specified for the CB 750. For the CB1000 Hornet SP from 2025 onward, the manufacturer specifies a different code, BHG-134.

Installation

Mounts on the original handlebar, with no drilling or modifications to the bike. The standard handlebar weights must be removed because the structure anchors directly to the handlebar ends, and the supplied weights are used in their place.

Before fully tightening, check that the throttle, front brake, clutch, and engine stop switch operate freely and that the steering turns from lock to lock without interference. Recheck the tightening after the first 50 km. The complete procedure and warnings are provided in the official INS-BHG-109-NP instructions, attached to this product page in the Manufacturer documents section.

What you will find in the package

  • Two heat-treated aluminum bars
  • Clamps for the straight section of the handlebar
  • Complete mounting hardware
  • Handlebar weights

What is NOT included

  • Protection plastics. They must be selected and ordered separately from the JET, VPS, STORM, and CARBON series. EGO plastics are not compatible with this structure.
  • LED lights and other accessories in the range, which remain separate products.

Why choose Barkbusters

Barkbusters is a brand of Rideworx Pty Ltd, an Australian company that has designed and produced motorcycle handguards since 1984. The range is built around a precise idea: the structure is specific to the motorcycle, while the plastics are universal within the system. You buy the right structure once and then choose the protection you need, replacing it if it gets damaged or if your type of use changes, without replacing everything.

Why buy it from Endurrad

Endurrad specializes in touring, adventure, and enduro motorcycle accessories: compatibility checked against the manufacturer's documentation, official instructions attached to the product page, and pre-purchase assistance if your model is unclear. Free shipping in Italy on orders over €100 and in Europe on orders over €250, returns within 14 days, 1-year warranty. See the full Barkbusters range.

Nella confezione

  • Due barre in alluminio — trattate termicamente, finitura naturale.
  • Morsetti e viteria completa — sagomati sul manubrio della CB 750 Hornet.
  • Contrappesi manubrio inclusi — sostituiscono quelli di serie, che vanno rimossi.
  • Plastiche di protezione NON incluse — da scegliere fra JET, VPS, STORM e CARBON.

BHG-109 · Honda CB 750 Hornet from 2023 · Bar-end weights included

Real protection on a naked bike

On the Hornet, handguards aren't an enduro accessory: they're levers and controls that stay intact.

Structure only, including counterweights
01

Structure only, including counterweights

What you see is the complete kit: two heat-treated aluminum bars, the clamps, the hardware, and the handlebar weights. The protective plastics are a separate item, to be chosen from JET, VPS, STORM, and CARBON.

The first point: the end of the handlebar
02

The first point: the end of the handlebar

The bar anchors inside the end of the handlebar, replacing the original bar end weight. Replacement weights are included in the kit: there is no need to buy them separately or retrieve the stock ones, which must be removed and kept.

The second point: the clamps on the handlebars
03

The second point: the clamps on the handlebars

The clamps close around the straight section of the handlebar, in front of the controls, and are shaped to fit between the cables and switchgear of the Hornet. This is the point that turns the handguard into a cage around the hand: without it, the bar would act as a cantilever supported only at the end.

On the Hornet, with the VPS plastics
04

On the Hornet, with the VPS plastics

In the official photo, the kit is fitted with VPS plastics, sold separately: a two-position adjustable deflector, useful on a naked bike that gets all the wind in winter. JET, STORM, or CARBON can also be mounted on the same structure, and they can be changed over the years without touching the aluminum.

Scheda tecnica

Specifiche tecniche

Tutti i dati

Compatibility

Motorcycle
Honda CB 750 Hornet
Years
since 2023
Reference specifications
Original factory configuration The manufacturer states compatibility with motorcycles to OEM specifications
Compatible plastics
JET, VPS, STORM and CARBON Four series, each sold separately. The EGO ones are not compatible.

Structure and materials

Structure
Heat-treated aluminum bar Wraparound design, a treatment chosen by the manufacturer for impact resistance and protection
Finish
Natural aluminum
Production
Australia Rideworx Pty Ltd

Assembly

Mounting type
Two points Handlebar end plus clamp on the straight section
Retightening check
after 50 km Manufacturer-recommended medium-strength threadlocker

Protection

Impact protection
Declared Barkbusters declares two-point products designed for impact protection

Packaging

Content
Aluminum bars, clamps, hardware and handlebar weights
Protective plastics
NOT included

Dati dichiarati da Barkbusters (Rideworx Pty Ltd) sulla pagina ufficiale del codice BHG-109-NP e sulle istruzioni di montaggio INS-BHG-109-NP. Peso e dimensioni non sono dichiarati dal produttore in forma numerica.

Manuale d'usoDocumento originale BARKBUSTERS Scarica ↓

Prima di ordinare

Montaggio e requisiti

Come si monta

  1. Verifica che la moto sia una CB 750 Hornet dal 2023 e che il manubrio sia quello originale.
  2. Rimuovi i contrappesi di serie: al loro posto vanno quelli forniti nel kit.
  3. Monta i morsetti sulla sezione dritta del manubrio, davanti ai comandi, senza serrare a fondo.
  4. Fissa la barra in alluminio all estremità del manubrio e al morsetto, poi portala in posizione.
  5. Monta le plastiche che hai scelto, allinea tutto e serra.
  6. Verifica il funzionamento di gas, freno anteriore, frizione e interruttore di arresto, e che lo sterzo giri liberamente da fondo a fondo. Ricontrolla il serraggio dopo i primi 50 km.
Istruzioni complete e note di sicurezza

Le istruzioni ufficiali INS-BHG-109-NP sono allegate a questa scheda.

  1. Verifica che la moto sia una CB 750 Hornet dal 2023 e che il manubrio sia quello originale.
  2. Rimuovi i contrappesi di serie: al loro posto vanno quelli forniti nel kit.
  3. Monta i morsetti sulla sezione dritta del manubrio, davanti ai comandi, senza serrare a fondo.
  4. Fissa la barra in alluminio all estremità del manubrio e al morsetto, poi portala in posizione.
  5. Monta le plastiche che hai scelto, allinea tutto e serra.
  6. Verifica il funzionamento di gas, freno anteriore, frizione e interruttore di arresto, e che lo sterzo giri liberamente da fondo a fondo. Ricontrolla il serraggio dopo i primi 50 km.

Frenafiletti di media resistenza su tutti i fissaggi. Il produttore considera il montaggio dei paramani un intervento rilevante per la sicurezza, da affidare a un tecnico se non hai dimestichezza.

A chi usa la CB 750 Hornet tutti i giorni, in città e per andare al lavoro, e non vuole pagare una leva nuova per un ribaltamento in parcheggio.

A chi ci va anche d inverno: senza carena l aria sulle mani è tutta, e con le plastiche abbinate cambia parecchio.

A chi ha già messo tamponi e protezioni al telaio e vuole completare il ragionamento sulla parte più esposta e più costosa da sostituire.

Non è la scelta giusta per la CB1000 Hornet: lì il produttore dichiara un codice diverso.

Per moto Honda

Honda
Hai un dubbio sulla compatibilità?Mandaci una foto su WhatsApp: ti rispondiamo noi. Scrivici →

Domande frequenti

Le domande che ci fate più spesso

Are the protective plastic parts included?

No. Here you purchase only the aluminum frame with the hardware and counterweights. The JET, VPS, STORM, or CARBON plastics are ordered separately, remain interchangeable on the same frame, and can be changed to a different color even years later.

My model is listed in the table, but the year isn’t: can I still install it?

The manufacturer specifies the CB 750 Hornet from 2023 onward, with no upper limit. For other Hornet models, including the historic CB 600 F and the CB1000 Hornet, compatibility is not specified for this part number: send us the model and year, and we will check.

Are the handlebar counterweights included?

Yes, the manufacturer states that they are included with this code. The motorcycle's standard bar-end weights must be removed because the structure attaches precisely to the end of the handlebar, and the supplied ones are installed in their place.

I have a CB1000 Hornet: is this kit suitable?

No. The BHG-109 is specified for the CB 750 Hornet. For the CB1000 Hornet SP from 2025 onward, the manufacturer specifies a different code, BHG-134. The name Hornet alone is not enough to choose the kit.

Why install handguards on a naked street bike?

For the same reason frame sliders are installed. On a naked bike, the risk isn't a branch; it's tipping over while stationary in a parking lot and sliding at low speed, and in both cases the first thing to hit the ground is the lever. With an aluminum bar anchored at two points, the structure takes the impact. Also, in winter, the plastics reduce the airflow on your hands, which is significant on a bike without a fairing.

What protective plastics can I mount on this structure?

Four series declared by the manufacturer: JET with a compact profile, VPS with an adjustable deflector, STORM with extended coverage, and CARBON in carbon fiber. On a naked bike used year-round, the VPS is the most common choice. EGO models are not compatible.

Avvisami quando disponibile

Ti scriviamo appena Barkbusters BHG-109 handguard mounting kit for Honda CB 750 Hornet from 2023 (Two-point, aluminum) torna disponibile.