• Garagela tua moto e solo gli accessori compatibili
  • −5%Benvenuto nel Garage5% off for those who save the motorcycle in the app, until 12/31/2026
  • Cerca con una fotol'app riconosce la tua moto
  • Diario mototagliando, revisione, bollo
  • Avvisaminotifica quando un prodotto torna disponibile
  • −5%Primo ordinefatto dall'app
  • Vedi in 3De sulla tua moto, in realtà aumentata
Scarica su App Store Disponibile su Google Play Download

Free shipping on orders over €100 · 14-day returns

Cavo a Y per guanti riscaldati da moto con spina USB-A angolata e due spinotti, per alimentazione da power bank
-10%Pre-ordine
15 W Mini power bank
18 W Recommended power bank
2 Exits
5–9 V Glove tension

Panoramica

In breve

H-1-3 · USB-A verso due spinotti · power bank da almeno 15 W, consigliati 18 W

L'autonomia la scegli tu

con una power bank capiente il limite non è più quello della batteria da 4000 mAh. È la soluzione per le tappe invernali lunghe.

Una sola sorgente per due mani

una spina USB-A da un lato, due spinotti dall'altro. Niente doppia batteria da ricordarsi di caricare.

La power bank ce l'hai già

basta che eroghi almeno 15 W, meglio 18 W. Non serve un accumulatore dedicato.

Previsto dal produttore

è la Modalità 2 di alimentazione descritta nel manuale dei guanti RST26, non un adattamento.

Dal produttore LOBOO

Produttore: LOBOO.

Denominazione ufficiale: H-1-3 Dual-connector Cable.

Codice: H-1-3, numero articolo LOBOO 11.1.02060.013.02.

Documentazione: le istruzioni d'uso sono nel manuale dei guanti riscaldati RST26, sezione Metodi di alimentazione, Modalità 2.

Leggi la descrizione completa

The Y-cable for heated gloves powers both gloves from a single power bank: one USB-A plug on one end and two connectors on the other, one for each hand. It is the second power option provided in the manual for the RST26 heated motorcycle gloves, as an alternative to the battery in the cuff.

What it is for

With the 4000 mAh battery, the stated runtime is approximately 2.5 hours on the low setting. With the Y-cable, the power bank stays in an inside jacket pocket, the two cables run along the sleeves to the cuffs, and the runtime becomes that of the power bank you choose: this is the solution for long winter rides.

What power bank is needed

  • Output of 15 W or higher, capable of delivering 5 V 3 A or 9 V 2 A (RST26 manual)
  • 18 W or more recommended (LOBOO panels)
  • Below this threshold, the fast-charging protocols of some models may cause interruptions or slow heating

How to use it

Insert the USB plug into the power bank and the two connectors into the gloves. When connecting or disconnecting, always grip the plug body without pulling the cable, and route the cables so they do not remain taut when you move your arms.

The package contains the cable only: gloves and power bank are sold separately. You can find gloves and accessories in the heated motorcycle clothing collection.

Nella confezione

  • PRODOTTO LOBOO ORIGINALE nuovo, nella confezione prevista dal produttore.
  • COSA COMPRENDE LA CONFEZIONE: il solo cavo a Y. Guanti riscaldati e power bank non sono inclusi.
  • SERVE UNA POWER BANK ADEGUATA: almeno 15 W di uscita, meglio 18 W o più.
  • COMPATIBILITÀ VERIFICABILE PRIMA DELL'ACQUISTO, dicendoci quale modello di guanti riscaldati possiedi.

Dati dal manuale d'uso LOBOO

Specifiche tecniche

Tutti i dati

Product

Code
H-1-3 Manufacturer's article number 11.1.02060.013.02
Official name
Dual-connector Cable
Type
Y-shaped power cable alternative to the CP40Pro battery in the wristband
EAN
6978601701852

Construction

Connectors
1 USB-A, 2 connectors one input for the power bank, one output for the glove
Power bank-side connector
Angled USB-A spine bent at 90°, as in the official photo
Glove-side connectors
2 cylindrical plugs one per glove
Sheath
Black braided as in the official photo
Length
Not specified by the manufacturer

Power supply

Minimum power bank power
15 W Below threshold; possible interruptions or slow heating
Recommended power
18 W or higher, according to the LOBOO RST26 panels
Power bank output required
5 V 3 A / 9 V 2 A direct power supply specified in the RST26 manual
Gloves operating voltage
5–9 V RST26 manuals

Compatibility

Compatible gloves
LOBOO heated gloves The RST26 manual specifies it as Power Mode 2

Use

Alternative to
CP40Pro 4000 mAh battery RST26 manual Mode 1
Power bank position
Inside jacket pocket Cuffs along the sleeves up to the wrists, RST26 manual pattern
Autonomy
It depends on the power bank no longer limited to a 4000 mAh battery
Connecting and disconnecting
Challenge the plug the manual prohibits pulling the cable

Packaging

Not included
Gloves and power banks the package contains only the cable

Prima di ordinare

Montaggio e requisiti

Come si monta

Istruzioni complete e note di sicurezza

Produttore: Shenzhen LOBOO Motor Accessories Co., Ltd - Room 101, 201, 301, Building F, No. 30 Tongfu Road, Xinsheng Community, Longgang Subdistrict, Longgang District, Shenzhen, Guangdong, Cina. Tel. +86-400-858-8100.

Manuale: il cavo è descritto nel manuale d'uso dei guanti RST26, allegato in questa pagina: power bank da 15 W o superiore, 5 V 3 A oppure 9 V 2 A.

Avvertenze del produttore: collegando o scollegando l'alimentazione impugnare sempre il corpo della spina, senza tirare il cavo. Non usare il riscaldamento se l'interno del guanto è umido. Se la spia dei guanti lampeggia rossa veloce, scollegare subito l'alimentazione e far controllare i guanti.

È la scelta giusta se

  • Fai tappe lunghe d'inverno e l'autonomia delle batterie nel polsino non ti basta.
  • Hai già una power bank da almeno 15 W e vuoi sfruttarla.
  • Preferisci una sola sorgente da caricare invece di due batterie.

È da valutare con attenzione se

  • Non sopporti i fili sotto la giacca: due cavi corrono lungo le maniche fino ai polsi. Le batterie nel polsino sono più pulite.
  • La tua power bank sta sotto i 15 W: rischi interruzioni e riscaldamento lento, e il problema non sarà dei guanti.
  • Ti serve sapere la misura esatta: la lunghezza del cavo non è dichiarata dal produttore. Chiedicela e la verifichiamo.

Domande frequenti

Le domande che ci fate più spesso

Does it power both gloves?

Yes, that’s the purpose of the Y-shaped design: a USB connector on one end that plugs into the power bank, and two plugs on the other end, one for each glove. Only one power bank is needed for both hands.

Which power bank should I use?

The RST26 gloves manual requires a power bank with a 15 W or higher output, capable of delivering 5 V 3 A or 9 V 2 A; LOBOO panels recommend 18 W or more. Below the threshold, the fast-charging protocols of some models may cause interruptions or slow heating; in that case, the limitation is the power bank, not the gloves.

Does it work with RST26 gloves?

Yes. The RST26 glove manual specifies two power options: the CP40Pro battery in the cuff or the power bank connected with this Y-cable, sold separately.

How does it connect?

Insert the USB plug into the power bank and the two connectors into the glove connectors, one for each hand. The manual instructs you to always hold the plug body when connecting or disconnecting it, without pulling on the cable.

What connectors does it have?

On the power bank side, a 90° angled USB-A plug; on the other side, two cylindrical connectors, one for each glove, as shown in the official product photo.

Where do I put the power bank?

The RST26 manual shows it in an inside jacket pocket, with the two cables running along the sleeves to the cuffs. Route them so they do not remain taut when you move your arms.

Avvisami quando disponibile

Ti scriviamo appena USB Y-cable for heated motorcycle gloves | 15 W power bank supply (Default Title) torna disponibile.