JP032W

Code

F 850 and F 900 GS ADV

Motorcycle

P45T

Code

Single plate

Content

Identification

Product code

JP032W

Official name Top Case Rack

Served top case series

PIKE TRACKER, TIBET and CONQUEROR

As stated in the user manual

Compatibility

BMW F 850 GS Adventure

Since 2019

Year stated in the manual

BMW F 900 GS Adventure

Since 2025

Year stated in the manual

Not compatible

Standard GS versions

F 750 GS and F 850 GS require code JP031W

Assembly

Fastening system

Two clamps for an 18 mm tube plus two side brackets

The brackets are specific, one right and one left

Tube diameter

18

Original roof rack bar on which the clamps operate

Tightening torque

12 N.m on all M6 screws

To be administered in sequence after completing the adjustments

Maximum load

The one specified by BMW for the rear subframe

The limit includes the plate, top case, and contents. LOBOO does not specify its own value.

Equipment

Package contents

6 items: plate, 2 clamps, right and left brackets, 2 M6x16 screws, 4 M6x40 screws, 1 wrench

Top case not included

Tool included

Assembly key included

Materials

Material

Not stated by the manufacturer

The manual and price list do not specify the material of the plate.

Weight

Not stated by the manufacturer

Dati dal manuale d'uso LOBOO JP032W. Materiale e peso non sono dichiarati da nessuna fonte.

The steel support for the top case on BMW F 850 GS and F 900 GS Adventure.

All you need to know before ordering

Technical specifications, equipment, delivery, and warranty: find every detail, verified against official LOBOO documentation, below.

Description Top Case Plate for BMW F 850 GS Adventure from 2019 and F 900 GS Adventure from 2025

This is the base that allows you to mount a top box on the rear luggage rack of the F GS Adventure models, which have different geometry from the standard GS models and require a dedicated part number.

Check the version and year

The manual lists the BMW F 850 GS Adventure from 2019 and the BMW F 900 GS Adventure from 2025. For the standard versions, F 750 GS and F 850 GS, you need the JP031W plate, which has its own page: the two are not interchangeable.

How it is secured

The system differs from that of the standard sibling: here, the plate rests on two clamps that tighten around the 18 mm tubes of the original luggage rack, plus two dedicated side brackets, one right and one left. The plate is secured on top with two M6×16 screws and four M6×40 screws.

The manufacturer specifies not to fully tighten the screws during assembly: first complete all adjustments, then apply the torque in sequence, 12 N·m to all M6 screws. The assembly wrench is included, and the manual is available in eight languages, including Italian.

The manual calls for a removal step in the original luggage-rack area before installation, but does not identify the parts involved: if you want to know exactly what needs to be removed from your motorcycle, write to us and we will send you the illustrated procedure.

Which top boxes can you mount

The manual assigns the plate to the PIKE TRACKER, TIBET and CONQUEROR series. The top box is not included: this page concerns the plate only. LOBOO aluminum top boxes can only be mounted on LOBOO plates and luggage racks, not on mounts from other brands.

The rear load has a limit

LOBOO does not specify its own maximum load for the plate: the limit indicated by BMW in the owner's manual for the rear subframe applies, and includes the plate, top box and contents. Recheck the fasteners after the first 100–200 km and make sure the top box does not cover the license plate or rear lights.

The plate material is not specified by any LOBOO source, including the manual.

Why choose it
  • Adventure Geometry: sized for the rear subframe of the F 850 GS ADV and F 900 GS ADV from 2025 onwards, which differs from that of the standard GS models.
  • Plug-and-play installation: OEM points, no drilling or adapter brackets.
  • Steel construction: holds the top case stable even when fully loaded and on uneven surfaces.
  • Pre-drilled for PIKE TRACKER P45T: black or silver finish.
Who is it recommended for

You need this plate if you have an F 850 GS Adventure or an F 900 GS Adventure from 2025 onwards and want to mount a LOBOO top case.

Please note the version:For the F 750 GS, F 850 GS, and F 800 GS standard, you need the JP031W plate, on a separate page.

The top case is not included: the plate is the base, the top case must be purchased separately.

Documents and manufacturer

Assembly and Notes

  • Fixing to the OEM points of the rear subframe, without drilling or permanent modifications.
  • Respect the maximum load on the rear subframe indicated by BMW in the motorcycle's owner's manual.
  • Recheck the tightening after the first 100-200 km.
  • Verify make, model, year, and version before purchasing.

How does it work, in detail?

Geometry designed for Adventure versions

Geometry designed for Adventure versions

The luggage rack on the F 850 GS ADV and F 900 GS ADV has different mounting points and dimensions from the standard GS models. The JP032W is designed for this geometry: using the wrong model’s plate means misaligned holes and a mounting surface that does not sit flush.

It is secured with clamps onto the original luggage rack’s 18 mm tubes, using two dedicated side brackets. The manual requires preliminary removal in the luggage rack area.

F 850 ADV from 2019, F 900 ADV from 2025

F 850 ADV from 2019, F 900 ADV from 2025

This is the JP032W, and the manual specifies it for the F 850 GS Adventure from 2019 and the F 900 GS Adventure from 2025. The Adventure models have a luggage rack with mounting points that differ from those on the standard GS models, so a plate designed for the regular F 850 GS will not align here.

If your motorcycle is not an Adventure, the correct plate is the JP031W, which you can find on a separate page.

If in doubt, write to us with the model, year, and trim level before buying: we also reply on WhatsApp.

What do you mount on it: compatible top cases

What do you mount on it: compatible top cases

The plate is the interface between the motorcycle and the top case: on its own, it is of no use, but without it, no LOBOO top case can be attached. The 45-liter PIKE TRACKER P45T fits onto this plate, available in matte black or glossy silver.

The top case is purchased separately, leaving you free to choose later: install the plate today and decide on the capacity once you know how much luggage you really carry.

The weight above the tail is the one you feel the most.

The weight above the tail is the one you feel the most.

A loaded top case sits much higher and farther back than the side cases. Every kilogram up there lightens the front end and amplifies the rear’s movements: that’s why a motorcycle loaded evenly on the sides remains neutral, while ten kilograms in the top case makes it nervous on the highway.

This isn’t an argument against using a top case, but for loading it properly: put lightweight, bulky items inside, such as a spare helmet, rain gear, and spare parts. Keep the tools and the real weight low down in the side cases.

Always respect the maximum load BMW specifies for the rear subframe: this includes the mounting plate, top case, and contents.

FAQs

For more information, please see our FAQ.

What’s the difference compared with the plate for the F 750 and F 850 GS?

Replace the rear luggage rack. The JP032W is designed for the Adventure versions, the F 850 GS ADV from 2019 onward, and the F 900 GS ADV from 2025 onward, and is secured with two clamps on the 18 mm tubes plus two dedicated side brackets.

The JP031W, for the standard GS models, instead uses the subframe mounting points and requires no removal. The two mounting systems are different, not just the dimensions.

Which LOBOO top cases can I mount?

The manual lists the plate for the PIKE TRACKER, TIBET, and CONQUEROR series, each available in black or silver. The top case is not included and must be purchased separately.

Is the product covered by a warranty?

Yes: all LOBOO products sold on Endurrad are covered by the 24-month statutory consumer warranty. In the event of a lack of conformity, we will handle the claim with the manufacturer.

Can I return the product if it isn’t suitable?

Yes, you are entitled to return the item within 14 days of delivery under online purchase regulations. The product must be intact and in its original packaging: contact us and we’ll guide you through the process.

How does shipping work?

Tracked shipping throughout Italy: the product is carefully inspected and prepared before leaving our warehouse. The mounting accessories included in the original package are included.

Can I pay in installments?

Yes: at checkout, installment payment services are available directly among the payment methods, with no additional paperwork.

Is it an original LOBOO product?

Yes: we sell exclusively original LOBOO products, new and in the packaging provided by the manufacturer, with official documentation.

Didn't find the answer you were looking for?

Do not hesitate to contact us

Buying guides, technical comparisons, and news on adventure motorcycle accessories

Before choosing

View all

Modulo CGRC CAN per AIO-5 Play BMW con connettore a pin per il collegamento al Wonder Wheel

CGRC CAN per BMW: come scegliere tra 4 pin e 8 pin per il Wonder Wheel

Il CGRC CAN collega il display Chigee AIO-5 Play al Wonder Wheel della tua BMW. Esiste in versione 4 pin (GS/GSA) e 8 pin (C/F/S/R/K): la R 1300 GS ha bisogno di un connettore diverso, non ancora a catalogo.

Read moreabout CGRC CAN per BMW: come scegliere tra 4 pin e 8 pin per il Wonder Wheel

Piastra top case LOBOO JPT131WA montata sul portapacchi originale della BMW R 1300 GS

Motorcycle top case plate: which one to choose to mount the top case on your motorcycle

In brief. An aluminum top case does not attach directly to the motorcycle: it requires a top case plate, the interface connecting the luggage rack (standard or added) to the bottom of the top case. On Endurrad, you can find...

Read moreabout Motorcycle top case plate: which one to choose to mount the top case on your motorcycle

Honda XL750 Transalp 2026 in azione

Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

From 2026, the Honda XL750 Transalp comes with the E-Clutch as standard on both versions, full-power and A2, at the same price of €10,990. Official technical specifications, what really changes, and how to equip it for touring with Endurrad catalog accessories.

Read moreabout Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes