Identification

Product code

JP062B

Series

PIKE TRACKER · Side Case Rack

Compatibility

Motorcycle

BMW S 1000 XR from 2021

Equipment

Package contents

12 items

Left and right frames, connecting bar, 4-L and 4-R brackets, 5-VL and 5-VR brackets, 6-HL and 6-HR brackets, hardware and threadlocker

Hardware

2 M8×20 screws, 6 M8×30 screws, 8 M6×25 screws, 8 M6 washers, and 8 M8 washers

Assembly

Torque pairs

M8 22 N·m · M6 12 N·m

Screws left loose during assembly, threadlocker, and final tightening

Maintenance

Periodically check the tightness of the screws

JP062B · PIKE TRACKER · BMW S 1000 XR dal 2021 · 12 pezzi in distinta

All you need to know before ordering

Technical specifications, equipment, delivery, and warranty: find every detail, verified against official LOBOO documentation, below.

Description Side case racks for BMW S 1000 XR | PIKE TRACKER series

Pair of side frames from the PIKE TRACKER series for the BMW S 1000 XR from 2021 onward, code JP062B. They form the structure that supports the aluminum side cases: they are mounted to the motorcycle’s attachment points and remain on the motorcycle even when the cases are not fitted.

The package contains twelve items: left and right frames, a connecting bar, three sets of right- and left-hand mounting brackets, complete hardware with washers, and threadlocker.

The manufacturer specifies the tightening torque for each bolt: 22 N·m for the M8 bolts and 12 N·m for the M6 bolts. The bolts should be left loose during assembly and tightened only at the end, after applying the threadlocker.

Why choose it
  • Nessun foro nella moto: si usano i punti di fissaggio esistenti e, smontando, non resta traccia.
  • Restano su quando le valigie non servono: il telaio è discreto e la moto resta usabile tutti i giorni.
  • Kit completo: dodici voci con staffe, viteria e frenafiletti, senza dover comprare nulla in ferramenta.
  • Coppie dichiarate: il manuale le indica vite per vite, non a occhio.
  • Sistema aperto: le valigie PIKE TRACKER sono le stesse di tante altre moto, quindi si riusano.
Who is it recommended for

È la scelta giusta se

  • Hai già le valigie PIKE TRACKER e ti serve solo l'attacco per la S 1000 XR.
  • Vuoi partire dai telai e comprare le valigie in un secondo momento.
  • Ti interessa un montaggio reversibile, che non lascia segni sulla moto.

È da valutare con attenzione se

  • La tua moto è precedente al 2021: la compatibilità dichiarata parte da quell'anno.
  • Cerchi il pacchetto completo: telai e valigie insieme si prendono dalla scheda dedicata, che costa meno dei due pezzi separati.
  • Ti serve anche il bauletto: la piastra top case JP062W è un prodotto a parte.
Documents and manufacturer
  • Il produttore non dichiara una portata massima per telaio: vale il carico massimo ammesso dal libretto di circolazione della moto, contando anche il peso delle valigie vuote.
  • A valigie montate l'ingombro laterale cambia: adeguare guida, sorpassi e manovre negli spazi stretti.
  • Verificare che luci, targa e catadiottri restino visibili con il bagaglio installato.
  • Controllare periodicamente il serraggio delle viti, in particolare dopo i primi chilometri dal montaggio.
  • Tutte le viti originali rimosse durante l'installazione vanno rimontate secondo le coppie previste da BMW.

How does it work, in detail?

FAQs

For more information, please see our FAQ.

Is it suitable for my S 1000 XR?

The manufacturer states compatibility with the BMW S 1000 XR from 2021 onward. Earlier versions have a different rear frame, and the kit is not specified as compatible: if you have an older motorcycle, contact us with the year before ordering.

Do you need drilling or modifications?

No. The frames are attached to the motorcycle at the designated mounting points using the supplied brackets. Once removed, the motorcycle returns to its original condition.

What's in the package?

Twelve items: left and right frames, connecting bar, three pairs of brackets, 2 M8×20 screws, 6 M8×30 screws, 8 M6×25 screws, eight M6 washers, eight M8 washers, and threadlocker.

What torque should the screws be tightened to?

22 N·m on the M8s and 12 N·m on the M6s. The manufacturer asks that all screws be left loose during assembly, threadlocker applied, and tightened only at the end, in sequence.

Are bags included?

No, this listing is for the frame pair only. The PIKE TRACKER aluminum cases are purchased separately, or together in the complete package for the S 1000 XR.

Can I leave the frames mounted without the panniers?

Yes, and that’s the normal use: the panniers detach in an instant, while the frames remain on the motorcycle. That way, you don’t have to reinstall everything every time you set off.

How much can they hold?

The manufacturer does not specify a maximum load for the frame. The maximum permitted load stated in the motorcycle’s owner’s manual applies and must be observed, also taking into account the weight of the empty cases.

Is maintenance required?

The manufacturer recommends periodically checking the tightness of the screws, especially after the first few miles: these are the points that bear the luggage’s weight and vibrations.

Didn't find the answer you were looking for?

Do not hesitate to contact us

Buying guides, technical comparisons, and news on adventure motorcycle accessories

Before choosing

View all

Controller integrato nel collare della leva frizione LOBOO, raggiungibile con il pollice

BMW clutch lever with auxiliary light switch: does it fit your GS? Compatibility and installation

The LOBOO CLU081 clutch lever integrates the auxiliary light switch into the stock lever: which BMW models are compatible, what is included in the package, and how to install it without drilling anything.

Read moreabout BMW clutch lever with auxiliary light switch: does it fit your GS? Compatibility and installation

BMW R 1300 GS con paracoppa LOBOO montato sotto il motore, vista anteriore di tre quarti

Motorcycle skid plate: how to choose the right engine protection for your adventure bike

How to choose the right motorcycle skid plate: a comparison of materials, thicknesses, and mounting points, featuring the two LOBOO models for the BMW R 1300 GS and the skid plate for the Voge DS525X.

Read moreabout Motorcycle skid plate: how to choose the right engine protection for your adventure bike

Modulo CGRC CAN per AIO-5 Play BMW con connettore a pin per il collegamento al Wonder Wheel

CGRC CAN for BMW: how to choose between 4-pin and 8-pin for the Wonder Wheel

The CGRC CAN connects the Chigee AIO-5 Play display to your BMW's Wonder Wheel. It is available in a 4-pin version (GS/GSA) and an 8-pin version (C/F/S/R/K): the R 1300 GS requires a different connector, which is not yet in the catalog.

Read moreabout CGRC CAN for BMW: how to choose between 4-pin and 8-pin for the Wonder Wheel