32mm, 1.25 inches

Bar diameter

ABSglossy black

Material

Not includedsold separately

T3 Pod

Assembly

Attachment point

Engine guard and 1.25-inch crash bars, equivalent to 31.75 mm

Typical diameter of cruisers and Harley-Davidsons

Construction

Material

Glossy black ABS, shaped profile on the tube

Equipment

Manufacturer’s warranty

5

In addition to the 24-month statutory conformity warranty

Dati dichiarati da DENALI sulla scheda ufficiale europea dell'adattatore LAH.T3.10100.

Per fissare i pod T3 al paramotore delle cruiser

Everything you need to know before ordering

Technical specifications, equipment, delivery, and warranty: below you’ll find every detail verified against the official DENALI documentation.

Description Adapters for mounting T3 indicators on 32 mm bars

Code LAHT310100 — DENALI code LAH.T3.10100

Low-profile adapters in gloss black ABS for mounting the T3 indicator pods on 1.25-inch engine guards and protective bars, approximately 32 mm - the most common size on custom motorcycles and Harley-Davidson motorcycles.

Measure the bar before ordering: the diameter, not the motorcycle model, determines whether these adapters will fit.

Mounting the indicators on the engine guard positions them farther out from the motorcycle's profile, increasing the area from which you can be seen.

Why choose it

Sulle cruiser il paramotore è la posizione naturale per portare le luci più in fuori e più in basso, dove si vedono. Questi adattatori in ABS sagomato abbracciano il tubo e ci fissano sopra i pod T3 senza staffe improvvisate.

  • Per tubi da 1,25 pollici, cioè 31,75 mm.
  • ABS nero lucido, profilo sagomato sul tubo.
  • Il diametro tipico dei paramotore Harley-Davidson.
Who is it recommended for

A chi ha un paramotore o una barra di protezione da 32 mm e vuole montarci i pod indicatori T3: la posizione più esterna aumenta l'ampiezza con cui la moto viene vista.

Se la barra ha un diametro diverso, o se non ce l'hai, ci sono le staffe da parafango per qualunque foro M5 o M6.

Complete technical specification sheet
Technical data
  • Diametro barra: 32 mm, pari a 1,25 pollici
  • Materiale: ABS nero lucido, a basso profilo
  • Uso tipico: barre di protezione motore su custom e Harley
  • Pod e cablaggio: non compresi, da acquistare a parte
  • Montaggio: a morsetto sulla barra, nessuna foratura
Documents and manufacturer

DENALI riconosce 5 anni di garanzia convenzionale del produttore. Si aggiunge, e non sostituisce, i 24 mesi di garanzia legale di conformità previsti per legge.

I pod indicatori T3 sono omologati E-Mark. Lo spostamento degli indicatori di direzione è soggetto alle prescrizioni del codice della strada del Paese in cui circoli su posizione, distanza e altezza da terra: verifica sempre la normativa locale.

How does it work, in detail?

  • Shaped adapters for attaching the T3 pods to the engine guard.
The indicators on the engine guard

The indicators on the engine guard

Mounting the T3 pods on the engine protection bars places them farther out from the motorcycle’s profile: the distance between the two lights increases, along with the width at which a car perceives you in its mirror.

It’s the typical position on custom bikes and Harleys, where an engine guard is almost always present.

Measure the bar: 32 mm

Measure the bar: 32 mm

DENALI states that they are for 1.25-inch bars, or approximately 32 mm: this is the most common size on custom motorcycle crash bars, but it should be verified with a caliper before ordering.

They are made of glossy black ABS with a low-profile design: the pods stay close to the bar instead of protruding on an arm.

Three ways to mount T3 pods

Three ways to mount T3 pods

These adapters use a 32 mm bar. Alternatively, there are fender brackets, which attach to any existing M5 or M6 hole, and license plate brackets for rear pods on either side of the plate.

The indicator pods and wiring must be purchased separately.

FAQs

For more information, see our FAQ of frequently asked questions.

Are T3 pods included?

No. This is only the mount: the T3 indicator pods and wiring must be purchased separately. If a plug-and-play indicator kit exists for your motorcycle, it includes everything.

Which of the three T3 supports do I need?

It depends on what you have on the motorcycle. If there is a 32 mm engine guard, use the bar adapters. If there is a free M5 or M6 hole, use the fender brackets. For the rear pods on either side of the license plate, use the license plate brackets.

Does it also need wiring?

Yes. For many motorcycles, DENALI offers plug-and-play adapters that connect to the original connectors without tapping into the wiring; alternatively, you can connect it manually using Posi-Tap connectors, also considering anti-flicker resistors.

Didn’t find the answer you were looking for?

Don't hesitate to contact us

Buying guides, technical comparisons, and news about accessories for adventure motorcycles

Before choosing

View all

Suzuki V-Strom 800DE con valigie laterali e bauletto in alluminio LOBOO

Suzuki V-Strom 800DE: quali valigie e quale bauletto montare, con telai e prezzi reali

Sulla Suzuki V-Strom 800DE dal 2024 il bagaglio rigido LOBOO si compone con due supporti indipendenti, il telaio laterale JP421B e la piastra JP421W. Configurazioni, litri, prezzi, scorte reali e montaggio a confronto.

Read moreabout Suzuki V-Strom 800DE: quali valigie e quale bauletto montare, con telai e prezzi reali

Manubrio di moto adventure con entrambi i copri manopole LOBOO H80 installati

Heated motorcycle grip covers: Will they fit yours? Size, wiring, and installation of the LOBOO H80

A heated grip cover is not chosen by motorcycle model but by the grip diameter: the LOBOO H80 fits grips from 29 to 35 mm. How to measure, connect to a 12–15 V system, and install without removing the controls.

Read moreabout Heated motorcycle grip covers: Will they fit yours? Size, wiring, and installation of the LOBOO H80

BMW R 1250 GS Adventure con coppia di borse gonfiabili LOBOO Wanderer montate sulle barre paramotore

Accessories for enduro and maxi-enduro motorcycles: the best options, from panniers to inflatable crash bar bags

The accessories that really matter on an enduro or maxi-enduro motorcycle, in order of priority: rear panniers and frames, crash bars, crash bar bags, and inflatable bags explained in detail, with verified manufacturer data, prices, and availability.

Read moreabout Accessories for enduro and maxi-enduro motorcycles: the best options, from panniers to inflatable crash bar bags