Steelpowder-coated

Material

M8standard DENALI

Mounting hole

Serial pointsno punctures

Assembly

Compatibility

Motorcycle

Kawasaki KLR 650E

2008-2018, under the headlight on the fairing bracket

Spotlights

The entire DENALI range

Construction

Material

Powder-coated steel

Assembly

Spotlight mount

Foro M8

Construction

Weight

1.200

2.65 lb stated by the manufacturer

Packaging

Content

Brackets and fasteners

Spotlights not included

Equipment

Manufacturer’s warranty

5

In addition to the 24-month statutory conformity warranty

Dati dichiarati da DENALI sulla scheda ufficiale europea del supporto LAH.08.10000.

Faretti nella posizione giusta, senza forare niente

Everything you need to know before ordering

Technical specifications, equipment, delivery, and warranty: below you’ll find every detail verified against the official DENALI documentation.

Description Auxiliary light mounts for Kawasaki KLR 650 E from 2008

Code LAH0810000 — DENALI code LAH.08.10000

Specific mount that allows any DENALI light to be installed in the optimal position on the Kawasaki KLR 650 E from 2008 to 2018. Powder-coated steel brackets with an M8 mounting hole and all the necessary hardware.

Pay attention to the generation: despite the nearly identical name, the KLR 650 released in 2022 is a new motorcycle with a different front end and dedicated mounts.

It is on motorcycles like this that a pair of LEDs makes the biggest difference to night riding, because the original headlight is halogen. However, check the electrical system's available capacity before choosing very powerful lights.

Why choose it

Supporto per faretti disegnato sulla Kawasaki KLR 650 E dal 2008: si fissa a punti di ancoraggio già presenti sulla moto, senza forare né adattare niente.

Attenzione alla generazione: per le KLR 650 dal 2022 esiste il supporto dedicato, codice LAH0810700.

Who is it recommended for

A chi ha una KLR 650 E dal 2008 al 2018 e vuole rimediare al faro alogeno originale, che su questa generazione è il limite più evidente nella guida notturna.

Se la tua KLR è dal 2022 in poi serve un altro supporto: quella è una moto completamente nuova, con versione inferiore e superiore da paramotore.

Complete technical specification sheet
Technical data
  • Materiale: acciaio verniciato a polvere
  • Foro di montaggio: M8, compatibile con tutti i faretti DENALI
  • Compatibilità: Kawasaki KLR 650 E dal 2008 al 2018
  • Montaggio: sui punti di fissaggio di serie, nessuna foratura
  • Nota: non compatibile con la KLR 650 dal 2022
Documents and manufacturer

DENALI riconosce 5 anni di garanzia convenzionale del produttore. Si aggiunge, e non sostituisce, i 24 mesi di garanzia legale di conformità previsti per legge.

Restano esclusi usura normale, abrasione, uso improprio, installazione errata, incidenti e modifiche. Tagliare o adattare le staffe rientra fra le modifiche e fa decadere la garanzia del produttore.

L'uso su strada pubblica dei fasci supplementari è regolato dal codice della strada del Paese in cui circoli: verifica sempre le prescrizioni locali.

How does it work, in detail?

  • Spotlights in the right position, without drilling anything.
The KLR 650 E, not the one from 2022

The KLR 650 E, not the one from 2022

The stated compatibility is Kawasaki KLR 650 E from 2008 to 2018. Despite the nearly identical name, the KLR 650 released from 2022 onward is a new motorcycle with a different front end and dedicated mounts.

Powder-coated steel brackets, M8 mounting hole, and hardware included.

Modern spotlights on a dated headlamp

Modern spotlights on a dated headlamp

It's on a motorcycle like this that a pair of LEDs makes the biggest difference: the original halogen headlight provides weak, yellow light, while two modern LEDs dramatically improve nighttime visibility.

However, check the electrical system's capacity before choosing very powerful auxiliary lights: on a single-cylinder motorcycle from those years, the available electrical reserve is limited.

On a motorcycle that's a few years old

On a motorcycle that's a few years old

Before reinstalling the original fasteners, it is worth checking their condition: on a cantilevered mount, a worn fastener loosens quickly. Use medium-strength threadlocker and check it again after the first 50 km.

The mount attaches to the points already provided by the manufacturer: no drilling, reversible installation.

FAQs

For more information, see our FAQ of frequently asked questions.

Will it fit the KLR 650 from 2022 onward?

No. The KLR 650 released from 2022 onward is a new motorcycle with a different front end: lower and upper engine guard mounts are available for it. This one is for the KLR 650 E from 2008 to 2018.

Which auxiliary lights are suitable for this motorcycle?

The M8 hole fits the entire range, but on a single-cylinder bike from those years the electrical reserve is limited: it is advisable to choose lights with low power consumption and check the system’s available margin.

Do you need to drill into or modify the motorcycle?

No. The support attaches to the points already provided by the manufacturer, with the hardware included. The installation is reversible.

Didn’t find the answer you were looking for?

Don't hesitate to contact us

Buying guides, technical comparisons, and news about accessories for adventure motorcycles

Before choosing

View all

Suzuki V-Strom 800DE con valigie laterali e bauletto in alluminio LOBOO

Suzuki V-Strom 800DE: quali valigie e quale bauletto montare, con telai e prezzi reali

Sulla Suzuki V-Strom 800DE dal 2024 il bagaglio rigido LOBOO si compone con due supporti indipendenti, il telaio laterale JP421B e la piastra JP421W. Configurazioni, litri, prezzi, scorte reali e montaggio a confronto.

Read moreabout Suzuki V-Strom 800DE: quali valigie e quale bauletto montare, con telai e prezzi reali

Manubrio di moto adventure con entrambi i copri manopole LOBOO H80 installati

Heated motorcycle grip covers: Will they fit yours? Size, wiring, and installation of the LOBOO H80

A heated grip cover is not chosen by motorcycle model but by the grip diameter: the LOBOO H80 fits grips from 29 to 35 mm. How to measure, connect to a 12–15 V system, and install without removing the controls.

Read moreabout Heated motorcycle grip covers: Will they fit yours? Size, wiring, and installation of the LOBOO H80

BMW R 1250 GS Adventure con coppia di borse gonfiabili LOBOO Wanderer montate sulle barre paramotore

Accessories for enduro and maxi-enduro motorcycles: the best options, from panniers to inflatable crash bar bags

The accessories that really matter on an enduro or maxi-enduro motorcycle, in order of priority: rear panniers and frames, crash bars, crash bar bags, and inflatable bags explained in detail, with verified manufacturer data, prices, and availability.

Read moreabout Accessories for enduro and maxi-enduro motorcycles: the best options, from panniers to inflatable crash bar bags