Steelpowder-coated

Material

M8standard DENALI

Mounting hole

Serial pointsno punctures

Assembly

Compatibility

Motorcycle

Kawasaki KLR 650

2022-2023. Excluding the KLR 650 S: its lower setup does not allow it

Spotlights

DENALI DM, D2, D3 and S4

Only the compact models in the range

Construction

Material

Powder-coated steel

Assembly

Spotlight mount

Foro M8

Construction

Weight

816

1.8 lb stated by the manufacturer

Packaging

Content

Brackets and fasteners

Spotlights not included

Equipment

Manufacturer’s warranty

5

In addition to the 24-month statutory conformity warranty

Dati dichiarati da DENALI sulla scheda ufficiale europea del supporto LAH.08.10700.

Faretti nella posizione giusta, senza forare niente

Everything you need to know before ordering

Technical specifications, equipment, delivery, and warranty: below you’ll find every detail verified against the official DENALI documentation.

Description Lower auxiliary light mount DM, D2, D3 and S4 for Kawasaki KLR 650 2022-2023

Code LAH0810700 — DENALI code LAH.08.10700

Lower bracket for mounting DENALI DM, D2, D3 and S4 lights in a low position on the 2022-2023 Kawasaki KLR 650, secured to the lower triple clamp. Powder-coated steel brackets with an M8 mounting hole and all necessary hardware.

Two conditions stated by DENALI: the bracket does not fit the KLR 650 S, because its lower setup does not allow it; and it only accepts compact lights. For the D4 and D7, there is the upper crash bar with mounting points, code LAH0810900.

Pay attention to the generation: despite the identical name, the KLR 650 released from 2022 onward does not share its front end with the KLR 650 E up to 2018. They are two different motorcycles with different brackets.

Why choose it

Supporto inferiore per i faretti compatti DENALI DM, D2, D3 e S4 sulla Kawasaki KLR 650 2022-2023: si fissa alla piastra di sterzo inferiore, senza forare né adattare niente.

Non va sulla KLR 650 S. Per le KLR 650 E dal 2008 al 2018 esiste il supporto dedicato, codice LAH0810000.

Who is it recommended for

A chi ha una KLR 650 del 2022 o 2023, non la versione S, e vuole i faretti compatti in basso: fascio largo verso i bordi e profondità vicina.

Se vuoi montare D4 o D7 serve il paramotore superiore con attacchi. E se la tua KLR è una 650 E fino al 2018, serve il supporto dedicato a quella generazione.

Complete technical specification sheet
Technical data
  • Posizione: inferiore
  • Materiale: acciaio verniciato a polvere
  • Foro di montaggio: M8, compatibile con tutti i faretti DENALI
  • Compatibilità: Kawasaki KLR 650 dal 2022
  • Montaggio: sui punti di fissaggio di serie, nessuna foratura
  • Nota: non compatibile con la KLR 650 E fino al 2018
Documents and manufacturer

DENALI riconosce 5 anni di garanzia convenzionale del produttore. Si aggiunge, e non sostituisce, i 24 mesi di garanzia legale di conformità previsti per legge.

Restano esclusi usura normale, abrasione, uso improprio, installazione errata, incidenti e modifiche. Tagliare o adattare le staffe rientra fra le modifiche e fa decadere la garanzia del produttore.

L'uso su strada pubblica dei fasci supplementari è regolato dal codice della strada del Paese in cui circoli: verifica sempre le prescrizioni locali.

How does it work, in detail?

  • Spotlights in the right position, without drilling anything.
Two brackets for the new KLR

Two brackets for the new KLR

This is the lower mount: it places the compact DM, D2, D3, and S4 lights low, on the steering plate, for a wide beam toward the edges. It does not fit the KLR 650 S, which is too low.

For D4 and D7, there is the upper crash bar with mounts, LAH0810900, which places them high on the outside of the headlight.

The 2022 KLR is a new motorcycle

The 2022 KLR is a new motorcycle

Despite the identical name, the KLR 650 released from 2022 onward does not share its front end with the KLR 650 E up to 2018: they are two different motorcycles with different mounts. This is the most common purchasing mistake for this model.

Powder-coated steel brackets, M8 mounting hole, and hardware included.

Low position: more exposed

Low position: more exposed

Near the front wheel, the auxiliary lights are exposed to mud, stones, and spray. DENALI lights are waterproof, so sealing is not the issue, but it's a good idea to check the tightness and cleanliness more often.

On a motorcycle that regularly goes off-road, consider protective grilles.

FAQs

For more information, see our FAQ of frequently asked questions.

Is it compatible with the KLR 650 E through 2018?

No. Despite the identical name, the KLR 650 from 2022 onward is a new motorcycle with a different front end. The dedicated mount is available for the KLR 650 E up to 2018.

Is this better, or the upper support?

It depends on the auxiliary lights. This mount accepts only the compact DM, D2, D3, and S4 lights and keeps them low to widen the beam toward the edges. For the D4 and D7, DENALI recommends the upper crash bar with mounts, LAH0810900, which positions them outside the headlight.

Do the spotlights on the bottom get damaged?

They are more exposed to mud and stones, but DENALI lights are waterproof: the protection rating is indicated in each model's specifications. However, it is advisable to check tightness and cleanliness more often, and use protective grilles if you ride off-road.

Didn’t find the answer you were looking for?

Don't hesitate to contact us

Buying guides, technical comparisons, and news about accessories for adventure motorcycles

Before choosing

View all

Suzuki V-Strom 800DE con valigie laterali e bauletto in alluminio LOBOO

Suzuki V-Strom 800DE: quali valigie e quale bauletto montare, con telai e prezzi reali

Sulla Suzuki V-Strom 800DE dal 2024 il bagaglio rigido LOBOO si compone con due supporti indipendenti, il telaio laterale JP421B e la piastra JP421W. Configurazioni, litri, prezzi, scorte reali e montaggio a confronto.

Read moreabout Suzuki V-Strom 800DE: quali valigie e quale bauletto montare, con telai e prezzi reali

Manubrio di moto adventure con entrambi i copri manopole LOBOO H80 installati

Heated motorcycle grip covers: Will they fit yours? Size, wiring, and installation of the LOBOO H80

A heated grip cover is not chosen by motorcycle model but by the grip diameter: the LOBOO H80 fits grips from 29 to 35 mm. How to measure, connect to a 12–15 V system, and install without removing the controls.

Read moreabout Heated motorcycle grip covers: Will they fit yours? Size, wiring, and installation of the LOBOO H80

BMW R 1250 GS Adventure con coppia di borse gonfiabili LOBOO Wanderer montate sulle barre paramotore

Accessories for enduro and maxi-enduro motorcycles: the best options, from panniers to inflatable crash bar bags

The accessories that really matter on an enduro or maxi-enduro motorcycle, in order of priority: rear panniers and frames, crash bars, crash bar bags, and inflatable bags explained in detail, with verified manufacturer data, prices, and availability.

Read moreabout Accessories for enduro and maxi-enduro motorcycles: the best options, from panniers to inflatable crash bar bags