Side Case Frames for Honda CRF 1100 L Africa Twin Adventure Sports from 2020 | hardware and tool included

The manual cover states that it is for the Honda CRF1100L Adventure Sports from 2020 onward. The standard CRF1100L is not mentioned.

The two versions have different rear subframes and dimensions, so we cannot assume that the frame will fit both. If you have the standard version, contact us before ordering and we will ask the distributor for confirmation: it is the quickest way to avoid a return.

The aluminum PIKE TRACKER in the 35-liter left and 30-liter right configuration, in black or silver: the right one is narrower at the bottom to clear the exhaust muffler, so the orientation cannot be reversed.

Alternatively, the 40+30-liter semi-rigid WANDERER bags, which attach to any frame with an 18 mm tube. The cases are not included.

No: this page sells the pair of frames, which is the part intended for the motorcycle. The cases are selected separately, which is why the frame only needs to be installed once: you can change the type of case over the years without redoing the work.

Yes: the JP322W top-case plate is available for this motorcycle as a separate item with its own part number and manual. The side rack remains the same, so you can start with just the side cases and add the top case later.

The manual specifies 12 N·m for the M6 screws and 20 N·m for the M8 screws. A torque wrench is required, but it is not included.

The manual also advises not to fully tighten everything immediately: first position all the parts and check the alignment, then tighten them in sequence to the specified torque.

The manual does not specify any drilling: the frame is secured to the existing mounting points. However, it requires all parts and fasteners removed from the motorcycle to be reinstalled according to Honda’s torque specifications and instructions.

Yes. The bill of materials contains eighteen items: the two frame halves, the crossbar, the right and left brackets, four types of spacer, three sizes of M6 screws and three of M8 screws, fifteen washers, and the service tool.

The only tool you need is a torque wrench.

The manual for this code does not state this, and we prefer to tell you rather than choose a material ourselves.

The PIKE TRACKER series parameter sheet lists stainless steel or aluminum alloy frames, but this is a range-wide specification. If you need the precise specification for this code, ask us and we will verify it with the manufacturer.

The frame manual does not specify a load limit. The LOBOO aluminum luggage manual does, recommending that no more than 10 kg be loaded in each side case and 5 kg in the top case.

The stated reason is vibration while riding: this is a usage limit, not a breaking load. In any case, the motorcycle manufacturer's maximum total load specified in the registration document must also be observed.

Yes, that is normal. The manual lists JP332B, while the sales code is JP322B: LOBOO sometimes uses an internal numbering system that differs from the sales numbering. It is the same product, not a shipping error.

Yes. The LOBOO manual is published in eight languages, including Italian, with an illustrated part-by-part list and a numbered installation view, separated for the left and right sides. The PDF can be downloaded from this page.

Yes: the 24-month statutory warranty of conformity provided for by the Consumer Code applies. In the event of a defect, we will handle the claim with the manufacturer.