JP071B

LOBOO code

Four

Covered models

20N·m

Tightening torque

Due

Families

Product

Code

JP071B

Steel side pannier rack

Official name

PIKE TRACKER & CONQUEROR Side Case Rack

Product name as stated in the LOBOO manual

Content

Frames only

Panniers and top cases not included

Compatibility

Covered motorcycles

Four

R 1200 GS and Adventure, R 1250 GS and Adventure

Adventure Parts

Included

ADV-marked spacers and M8x35 screws, for use only on Adventure models

Compatible suitcases

Aluminum

P45L + P38R

PIKE TRACKER, black or silver

Semi-rigid

BCB4030TBK

WANDERER 40+30 L

Materials

Material

Not specified for this code

Neither the manual nor the LOBOO technical data sheet states this.

Assembly

Mounting points

Motorcycle originals

The manual does not specify drilling; the removed original parts must be reinstalled using the BMW torque specifications.

Tightening torque

20

On all supplied M8 screws

Included components

12

Left and right frame, crossbar, two brackets, spacers and ADV screws, washers, caps, and tool

Equipment

Hardware included

3 sizes

M8×20, M8×30, and M8×35, with ten M8 washers

Spacers for Adventure

Ø25ר8.5×5 mm

Two pieces marked ADV in the manual, to be used only on Adventure versions

Finishing caps

Ø20 mm

Two pieces that close the openings left after assembly.

Documentation

Assembly manual

8 languages

Italian included, with an illustrated parts list and the four models stated on the cover

To be verified

Weight and maximum load

Not declared by the manufacturer

The manual lists neither the frame weight nor a per-side load limit

The steel base for cases and side bags on BMW R 1200 and R 1250 GS, including Adventure models.

All you need to know before ordering

Technical specifications, equipment, delivery, and warranty: find every detail, verified against official LOBOO documentation, below.

Description Side Case Racks for BMW R 1200 GS, R 1250 GS, and Adventure | Dedicated ADV parts already included

Pair of LOBOO JP071B side frames for BMW R 1200 GS from 2013, R 1200 GS Adventure from 2014, and R 1250 GS and R 1250 GS Adventure from 2019, with crossbar, brackets, and mounting hardware. Panniers are not included.

One package for GS and Adventure

The box also contains the spacers and M8×35 screws marked ADV, which are used only on Adventure models. There is no need to order a different code depending on the version.

How to install them

No drilling is required. However, the manual calls for removing some original components on both sides and in the exhaust area before installing the frames, with one part to be restored once installation is complete: these are reversible operations, carried out using the supplied hardware and tool.

The package contains 12 components. LOBOO specifies a torque of 20 N·m for all M8 screws, with final tightening to be done in sequence only after all adjustments have been completed. The manual is available in eight languages, including Italian, and can be downloaded from this page.

Which panniers they support

  • PIKE TRACKER hard panniers — P45L on the left and P38R on the right
  • WANDERER semi-rigid panniers — 40 L on the left and 30 L on the right

The JP071B manual mentions the PIKE TRACKER and CONQUEROR series; compatibility with the WANDERER panniers is our own verification, based on the 18 mm tube requirement that LOBOO specifies for those panniers. You can alternate between hard and semi-rigid panniers without changing the frames.

The restriction to know before ordering

The mounting system is proprietary: LOBOO panniers fit only LOBOO frames, and these frames support only LOBOO panniers. If you already have panniers from another brand, these frames will not support them.

Material

Neither the manual nor the LOBOO technical sheet states the material used for this code. We prefer to say so rather than guess: if you need the confirmed information, write to us and we will verify it with the distributor.

If you are starting from scratch, the Wanderer Semi-Rigid Pannier Kit for the R 1250 GS already includes these frames together with the panniers.

Why choose it
  • LOBOO system common base:accepts PIKE TRACKER hard cases, WANDERER semi-rigid cases, and ALPS bags.
  • Plug-and-play mounting:OEM points, no drilling or frame modifications.
  • Rigid steel structure:withstands lateral load without flexing on uneven terrain.
  • Snug profile:limits width increase when cases are not mounted.
Who is it recommended for

These racks are for you if:

  • You already have LOBOO panniers and just need the racks
  • You want to mount PIKE TRACKER or ALPS panniers on your R 1200 or R 1250 GS
  • You want the flexibility to switch between hard and soft panniers on the same mounting system

If you're starting from scratch, consider the Wanderer Soft Pannier kit for R 1250 GS: it already includes these racks along with the panniers.

Documents and manufacturer

Assembly and Notes

  • Plug-and-play installation on OEM points, no drilling or permanent modifications.
  • Respect the maximum load per side frame indicated by BMW in the motorcycle's manual.
  • Re-check the tightenings after the first 100-200 km and periodically throughout the season.
  • Panniers are not included: the frames are the sole support structure.

How does it work, in detail?

One frame, three luggage families

One frame, three luggage families

The JP071B frames are the common foundation of the LOBOO system for the R 1200 and R 1250 GS: they accommodate the hard PIKE TRACKER cases (P45L plus P38R), the semi-rigid WANDERER 40 plus 30 L bags, and the ALPS bags. You can change the type of luggage to suit the trip without touching the frames.

Steel, rigid structure, profile that hugs the motorcycle, and plug-and-play mounting on the OEM points.

45 and 38 liters: 83 in total, and the motorcycle remains narrow

45 and 38 liters: 83 in total, and the motorcycle remains narrow

These frames support the largest PIKE TRACKER configuration after the symmetrical setups: 45 liters on the left and 38 on the right, 83 liters in total. That’s twenty liters more than the frames for mid-size adventure bikes, which top out at 35+30.

The difference between the two sides isn’t a compromise for less capacity: the right pannier wraps around the exhaust outlet, keeping the bike’s profile more compact than it would be with two 45-liter panniers.

Available in matte black and polished silver. The panniers are sold separately: here you’re buying the mounting base that supports them.

A single frame for four GS bikes

A single frame for four GS bikes

The JP071B covers the R 1200 GS from 2013, the R 1200 GS Adventure from 2014, the R 1250 GS and the R 1250 GS Adventure from 2019: four motorcycles with a single code.

If you change motorcycles while staying within the same family, the structure follows you.

The frame comes before the suitcase

The frame comes before the suitcase

The frames are the part that transfers the load's weight to the motorcycle's chassis. They determine whether the system can handle the load and should be selected before the cases.

They accommodate the P45L+P38R aluminum PIKE TRACKER cases and the 40+30-liter semi-rigid WANDERER cases.

It fits the top-case mounting plate.

It fits the top-case mounting plate.

The frames work with the side cases, while the plate fits the rear subframe: together, they complete the luggage system. The standard GS uses the JP071W, while the Adventure uses the JP072W.

You can install them at the same time or add the plate later, without altering anything already installed.

Same structure, GS and Adventure

Same structure, GS and Adventure

Unlike the R 1300 range, where the GS and Adventure require different frames, here the side structure is the same for both versions.

Only the top-case plate changes if you decide to add one.

Maximum load and tightening torques

Maximum load and tightening torques

BMW indicates a maximum load for each side frame, including the case and its contents: this is the limit that really matters, more than the capacity in liters.

After the first 100–200 km, check the fasteners again: the structure settles, and with off-road use, vibrations put more strain on the fasteners than riding on asphalt does.

FAQs

For more information, please see our FAQ.

Are they also compatible with the Adventure versions?

Yes. The manual cover lists four models: R 1200 GS from 2013, R 1200 GS Adventure from 2014, R 1250 GS from 2019, and R 1250 GS Adventure from 2019.

The package is the same for all four: two components in the parts list are marked ADV and are intended only for the Adventure models, so they are already included and nothing needs to be ordered separately.

Which parts should I use if I have the standard GS, and which ones if I have the Adventure?

In the parts list, two items are marked with the abbreviation ADV: the Ø25ר8.5×5 mm spacers and the M8×35 screws. They should only be installed on Adventure versions, which have mounting points set farther back.

On standard GS models, those two parts remain unused: it is normal to have them left over at the end of assembly; this does not mean a step was missed.

My 2011 R 1200 GS: is it suitable?

No. The manual specifies the R 1200 GS from 2013 onward, that is, the liquid-cooled generation. On earlier R 1200 GS models, the geometry of the rear subframe is different, and these frames are not listed as compatible.

If you are unsure of the exact year, send us the license plate or VIN, and we will confirm it before purchase.

Which LOBOO side cases can I mount on these frames?

The JP071B frames accommodate three families: the hard-shell PIKE TRACKER cases in the configuration of a left P45L plus a right P38R, the semi-rigid WANDERER 40 L left plus 30 L right, and the ALPS bags. The cases are not included with the frames and must be purchased separately.

If I buy the complete Wanderer kit, are these frames already included?

Yes. The Wanderer Semi-Rigid Pannier Kit for the BMW R 1250 GS already includes the JP071B frames. This page is for those who already own the panniers and only need the frames, or for those who want to mount the PIKE TRACKER or ALPS panniers on them.

Do you need to drill into or modify the motorcycle?

The manual does not specify any drilling: the frame is attached to the existing mounting points. However, it explicitly requires that all parts and fasteners removed from the motorcycle be reinstalled according to the manufacturer’s torque specifications and instructions.

What torque should the screws be tightened to?

The manual specifies 20 N·m for all M8 screws in the kit, in the three included lengths. A torque wrench is required, but it is not included.

The manual instructs you not to fully tighten the screws immediately: first position all the parts and check the alignment, then tighten them in sequence to the specified torque.

Are the hardware and tools included?

Yes. The parts list contains twelve items: left and right frames, crossbar, two brackets, spacers and screws in the three lengths, ten M8 washers, two finishing caps, and the service tool.

The only tool you need is a torque wrench.

What are the two included caps for?

They close the mounting points that remain unused on the motorcycle after the frame is installed, preventing open holes from being exposed to water and dirt. There are two, as specified in the manual’s parts list.

How much weight can I load on each side?

LOBOO does not state a maximum load for these frames, so we will not give you a figure that is not supported by any official document.

The reference to use is the side-case limit indicated by BMW in your motorcycle’s owner’s manual, which also takes into account the permitted total load.

Is the assembly manual in Italian?

Yes. The LOBOO manual is published in eight languages, including Italian, with an illustrated part-by-part bill of materials and the four compatible models listed on the cover. The PDF can be downloaded from this page.

Is the product covered by a warranty?

Yes: all LOBOO products sold on Endurrad are covered by the 24-month statutory consumer warranty. In the event of a lack of conformity, we will handle the claim with the manufacturer.

Didn't find the answer you were looking for?

Do not hesitate to contact us

Buying guides, technical comparisons, and news on adventure motorcycle accessories

Before choosing

View all

Maxi enduro con numero di gara su una strada bianca dell'Appennino tra boschi autunnali durante il Transitalia Marathon

Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle

From September 25 to October 1, 2026, from Rimini to Termoli in four stages and over 1,000 km: dates, route, Complex, Plain and Road tracks, costs, permitted motorcycles, luggage rules, and a complete checklist for preparing the maxi enduro.

Read moreabout Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle

Coppia di riser manubrio LOBOO montati su BMW R 1300 GS, finitura anodizzata argento

Motorcycle handlebar risers: which height should you choose for your bike?

Rise or setback? The complete range of LOBOO handlebar risers for BMW GS, KTM, Honda, Triumph, and other adventure bikes: stated measurements, real prices, and the check you should always perform after installation.

Read moreabout Motorcycle handlebar risers: which height should you choose for your bike?

Triumph Tiger 900 Rally Pro, base della Desert Edition 2026, equipaggiata con valigie laterali LOBOO Pike Tracker

Triumph Tiger 900 and 1200 Alpine and Desert Edition: what’s the difference between the two

Triumph adds the Alpine and Desert Editions to the Tiger 900 and 1200 lineup: standard suspension, wheels, and protection equipment differ. Here are the actual differences, official prices in Italy, and what to add for touring.

Read moreabout Triumph Tiger 900 and 1200 Alpine and Desert Edition: what’s the difference between the two