JP062W

LOBOO code

BMW S 1000 XR

Motorcycle

12N·m

Tightening torque

24 × 12mm

Spacers

Identification

Product code

JP062W

Series

PIKE TRACKER · Top Case Rack

Compatibility

Motorcycle

BMW S 1000 XR from 2021

Equipment

Package contents

7 items

Top plate, base plate, 4 spacers, 8 M6×16 screws, 4 M6 washers, and threadlocker

Measurements

Spacers

Outer diameter 24 mm · Inner diameter 9 mm · Height 12 mm

Assembly

Torque pairs

M6 12 N·m

On all supplied screws, with threadlocker and final tightening

Mounting points

Replaces the original screws of the tail fairing plates A and B

JP062W · PIKE TRACKER · BMW S 1000 XR dal 2021 · piastra doppia con distanziali

All you need to know before ordering

Technical specifications, equipment, delivery, and warranty: find every detail, verified against official LOBOO documentation, below.

Description Top case plate for BMW S 1000 XR | aluminum, using the original mounting points

Aluminum top-case rack plate dedicated to the BMW S 1000 XR from 2021 onward. PIKE TRACKER series, code JP062W.

The kit consists of two components that work together: the top plate, to which the top case attaches, and a base plate that distributes the load across the tail section. The four cylindrical spacers, with an outer diameter of 24 mm and a height of 12 mm, fit between them.

It is mounted using the original attachment points: remove the bolts indicated on the tail section’s A and B plates and replace them with the supplied M6×16 bolts, all tightened to 12 N·m with the supplied threadlocker.

Why choose it
  • Due piastre, non una: la piastra superiore porta il bauletto, quella di base distribuisce il carico sul codone. Il peso non scarica su quattro viti soltanto.
  • Sui punti originali: si sostituiscono le viti delle piastrine A e B del codone con quelle in dotazione. Nessuna foratura e nessuna modifica permanente.
  • Kit completo di viteria: quattro distanziali da 24 × 12 mm, viti M6×16 e frenafiletti, con la coppia di 12 N·m indicata dal produttore.
  • Convive con le valigie laterali: lavora su punti diversi della moto rispetto ai telai, e insieme a quelli completa il set con laterali e bauletto.
Who is it recommended for

È la scelta giusta se

  • Vuoi montare un bauletto sulla S 1000 XR dal 2021 senza forare né modificare il codone.
  • Hai già le valigie laterali e vuoi completare il set con il bagaglio posteriore.
  • Cerchi un attacco con piastra doppia, che distribuisca il carico invece di scaricarlo su quattro viti.

È da valutare con attenzione se

  • Non sai che codone monta la tua moto: la piastra si installa solo su un tipo di codino originale. È il punto da verificare prima di tutto il resto.
  • La tua moto è precedente al 2021: la compatibilità dichiarata dal produttore parte da quell'anno.
  • Il bauletto non è incluso: questa è la sola piastra di attacco.
Documents and manufacturer

Produttore: Shenzhen LOBOO Motor Accessories Co., Ltd - Room 101, 201, 301, Building F, No. 30 Tongfu Road, Xinsheng Community, Longgang Subdistrict, Longgang District, Shenzhen, Guangdong, Cina. Tel. +86-400-858-8100.

Documentazione: per questo codice il produttore fornisce l'elenco dei componenti con lo schema di montaggio e le coppie di serraggio, allegato in fondo alla scheda. Non è un manuale illustrato completo.

Avvertenze: eseguire tutte le regolazioni prima del serraggio finale, rispettare la coppia indicata e usare il frenafiletti fornito. Controllare periodicamente il serraggio. Le viti originali rimosse dal codone vanno conservate: servono per riportare la moto alla configurazione di serie.

How does it work, in detail?

FAQs

For more information, please see our FAQ.

Is the top case included?

No. The package includes the upper plate, base plate, spacers, and screws. The top case is purchased separately.

Which motorcycle does it fit?

For the BMW S 1000 XR from 2021 onward. It is the only motorcycle specified by the manufacturer for this code: the plate cannot be installed on earlier versions.

How do I know if my codon is the right one?

On the S 1000 XR, the top case can only be mounted with one specific type of original tail section: with the other one, the mounting plate will not fit. This is the first thing to check. If you’re unsure, send us a photo of the tail section and we’ll look at it together before you place your order.

Do you need to drill or modify the motorcycle?

No. Remove the screws indicated on the A and B tail plates and replace them with the supplied M6×16 screws. The installation is reversible: reinstalling the original screws returns the motorcycle to its original condition.

What torque should the screws be tightened to?

12 N·m on all M6×16 screws, using the threadlocker supplied in the kit. It is advisable to check the tightening again after the first few kilometers and then periodically.

Which top cases can be attached to it?

The PIKE TRACKER aluminum top cases, available in 36- and 45-liter sizes, come in matte black or silver. The mounting system is proprietary: top cases from other brands cannot be mounted on this plate.

What's in the package?

The upper plate onto which the top case attaches, the base plate that distributes the load across the tail section, the four cylindrical spacers with an outer diameter of 24 mm and a height of 12 mm, the M6×16 screws, and the threadlocker.

Can it be installed together with the side cases?

Yes. This plate and the side frames for the S 1000 XR attach to different points on the motorcycle and work together without interference: together, they complete the set with two side cases and the top case.

How much does it weigh, and how much weight can it support?

LOBOO does not state either the plate’s weight or a maximum load for this code, and we prefer to say so rather than report a figure taken from another item in the series. If you need the exact information, write to us and we’ll verify it with the distributor.

Didn't find the answer you were looking for?

Do not hesitate to contact us

Buying guides, technical comparisons, and news on adventure motorcycle accessories

Before choosing

View all

Controller integrato nel collare della leva frizione LOBOO, raggiungibile con il pollice

BMW clutch lever with auxiliary light switch: does it fit your GS? Compatibility and installation

The LOBOO CLU081 clutch lever integrates the auxiliary light switch into the stock lever: which BMW models are compatible, what is included in the package, and how to install it without drilling anything.

Read moreabout BMW clutch lever with auxiliary light switch: does it fit your GS? Compatibility and installation

BMW R 1300 GS con paracoppa LOBOO montato sotto il motore, vista anteriore di tre quarti

Motorcycle skid plate: how to choose the right engine protection for your adventure bike

How to choose the right motorcycle skid plate: a comparison of materials, thicknesses, and mounting points, featuring the two LOBOO models for the BMW R 1300 GS and the skid plate for the Voge DS525X.

Read moreabout Motorcycle skid plate: how to choose the right engine protection for your adventure bike

Modulo CGRC CAN per AIO-5 Play BMW con connettore a pin per il collegamento al Wonder Wheel

CGRC CAN for BMW: how to choose between 4-pin and 8-pin for the Wonder Wheel

The CGRC CAN connects the Chigee AIO-5 Play display to your BMW's Wonder Wheel. It is available in a 4-pin version (GS/GSA) and an 8-pin version (C/F/S/R/K): the R 1300 GS requires a different connector, which is not yet in the catalog.

Read moreabout CGRC CAN for BMW: how to choose between 4-pin and 8-pin for the Wonder Wheel