JP441W

LOBOO code

Due

Covered setups

5kg

Maximum load

36 and 45 L

Accepted sizes

Product

LOBOO code

JP441W

Rear plate with bracket, top case not included

Compatibility

Motorcycle

Tuareg 660 and Rally 660

Since 2022

Compatible top cases

PIKE TRACKER

P36T and P45T

36 or 45 liters, matte black or glossy silver

Accepted series

Three

PIKE TRACKER, TIBET and CONQUEROR

Loading

Top case maximum load

5

Weight limit declared by LOBOO for the top case

Assembly

Mounting points

Motorcycle originals

No drilling or adapter brackets needed

Torque pairs

12 and 20

12 N·m for M6 screws, 20 N·m for M8 screws

Included components

17

Support, plate, bracket, spacers, hardware, and tool

Hardware

Included

Content

Package

Plate and rear support

Top case and side frames not included

Materials

Material

Not specified for this code

LOBOO indicates stainless steel or aluminum alloy mounts.

Weight

Weight

Undeclared

LOBOO does not publish the weight of the mounts

Piastra e supporto posteriore per Tuareg 660 e Rally 660, dal 2022

All you need to know before ordering

Technical specifications, equipment, delivery, and warranty: find every detail, verified against official LOBOO documentation, below.

Description Aprilia Tuareg 660 / Tuareg Rally 660 top case plate

The LOBOO JP441W top case plate for the Aprilia Tuareg 660 and Tuareg Rally 660 from 2022 includes the tubular support, perforated plate, dedicated bracket, and all mounting hardware. The top case is not included.

Which top cases it supports

The JP441W manual lists three LOBOO series: PIKE TRACKER, TIBET, and CONQUEROR. Our catalog includes the aluminum PIKE TRACKER models in two sizes, 36-liter P36T and 45-liter P45T, in matte black or glossy silver. The mounting system is proprietary: top cases from other brands cannot be fitted to this plate.

How to install it

No drilling is required. However, the manual calls for removing some original components from the tail section before installing the support, and provides a dedicated bracket to install in their place: these operations are reversible and use the supplied hardware and tool.

The package contains 17 components, including the support, plate, bracket, spacers, washers, screws, and wrench. LOBOO specifies tightening torques of 12 N·m for the M6 screws and 20 N·m for the M8 screws. The manufacturer recommends not fully tightening everything immediately: make all adjustments first, then perform the final tightening in sequence, followed by periodic checks over time.

The manual is included in eight languages, including Italian.

Load capacity

LOBOO specifies a maximum load of 5 kg for the top case. This is lower than the limit for the side cases, which is 10 kg per side, because the weight is much higher and farther back here: above that threshold, it affects stability at high speeds.

The complete set

This plate and the JP441B side frames are designed to be used together on the same motorcycle: together, they form the set with two side cases and the top case.

Material

Neither the manual nor the LOBOO technical data sheet states the material used for this part number: for the series supports, the manufacturer specifies either stainless steel or aluminum alloy without indicating which one. We prefer to state it this way rather than make assumptions: if you need a definitive answer, write to us and we will verify it with the distributor.

Documents and manufacturer

Produttore: Shenzhen LOBOO Motor Accessories Co., Ltd - Room 101, 201, 301, Building F, No. 30 Tongfu Road, Xinsheng Community, Longgang Subdistrict, Longgang District, Shenzhen, Guangdong, Cina. Tel. +86-400-858-8100. Sito: www.loboo.com.cn

Manuale d'uso: fornito in confezione in otto lingue, italiano incluso, con elenco dei componenti, schema di installazione e coppie di serraggio.

Avvertenze del produttore: non serrare completamente le viti durante il montaggio; eseguire prima tutte le regolazioni e poi il serraggio finale in sequenza, rispettando le coppie indicate. Controllare periodicamente il serraggio. Ogni componente originale rimosso dalla moto va rimontato secondo le coppie e le indicazioni del costruttore del veicolo.

How does it work, in detail?

FAQs

For more information, please see our FAQ.

Is the top case included?

No. This package contains the rear plate and its bracket, along with the mounting hardware. The top case is purchased separately.

Which top cases can I mount on it?

I PIKE TRACKER in aluminum in both sizes, the 36-liter P36T and the 45-liter P45T, in matte black or polished silver.

Can I mount only the PIKE TRACKER top cases?

No, the JP441W manual lists three series: PIKE TRACKER, TIBET, and CONQUEROR. In our catalog, we have the PIKE TRACKER P36T and P45T; for the other two series, write to us and we’ll check.

Can I install it together with the side frames?

Yes. This plate and the JP441B side frames are designed to be used together on the same motorcycle: together, they form the complete set with two side cases and the top case.

How much weight can I load in the top case?

LOBOO recommends a maximum of 5 kg for the top case. This is a lower limit than for the side cases because the weight is positioned much higher and farther back.

Do you need to drill or modify the motorcycle?

No drilling required. However, the manual calls for removing some original components in the tail section before installing the mount and includes a dedicated bracket to install in their place. These operations are reversible, using the supplied hardware and tool. The torque specifications indicated by LOBOO are 12 N·m for the M6 bolts and 20 N·m for the M8 bolts.

What material is it made of?

For supports in the PIKE TRACKER LOBOO series, it indicates stainless steel or aluminum alloy without specifying which of the two applies to the JP441W. If you need the exact information, write to us and we’ll verify it with the distributor.

Didn't find the answer you were looking for?

Do not hesitate to contact us

Buying guides, technical comparisons, and news on adventure motorcycle accessories

Before choosing

View all

Honda CRF1100L Africa Twin con allestimento fuoristrada, pilota fermo in sella su prato

Honda Africa Twin: which version is really worth it?

Base, ES, DCT, or Adventure Sports: official 2026 Honda Italy prices and weights compared, what really changes between the CRF1100L Africa Twin versions, and which one is best depending on how you ride.

Read moreabout Honda Africa Twin: which version is really worth it?

ZXMoto 820X bianca vista di tre quarti anteriore, adventure cinese a tre cilindri

ZXMoto 820X: the three-cylinder Chinese adventure bike targeting Europe

The ZXMoto 820X emerges from Chinese homologation documents: a 819 cc three-cylinder engine, around 116 hp, 19- and 17-inch wheels, and a European debut expected at EICMA 2026. What is confirmed, what is not, and how it compares with the Triumph Tiger 900 GT.

Read moreabout ZXMoto 820X: the three-cylinder Chinese adventure bike targeting Europe

Prototipo BMW di media cilindrata camuffato durante i collaudi su strada bianca, vista frontale

BMW F 600 GS: what do we really know about the new mid-displacement GS?

BMW is reportedly developing a mid-displacement GS between the F 450 GS and F 900 GS: what the prototype shows, what BMW has actually confirmed, and how it would compare with the Yamaha Ténéré 700.

Read moreabout BMW F 600 GS: what do we really know about the new mid-displacement GS?