Aluminum handguards for Honda ADV350 | Brackets or complete set with shields

LOBOO declares only one model for code CHS511: Honda ADV350 from 2025 onward. Compatibility is not declared for earlier ADV350 models or other scooters in the range: write to us with the year and version, and we will check it before the order.

The manual lists 13 items: eight structural components in right and left pairs, 2 M8×20 screws, 2 M6×12 screws, 2 M6×16 screws, 2 M6×60 screws, and a tube of threadlocker. The assembly manual is included. The shields and impact bumpers are not part of this package.

No. LOBOO sells the three components that make up the handguard separately: brace (CHS511), shield with deflector (CHP001), and bumper pad (CFCK001). By choosing Braces only, you receive the two braces with the hardware; by choosing Complete set, you also receive shields and pads.

Solo archetti is the pair of CHS511 aluminum bars with hardware: it protects the levers but does not shield against the wind. The complete set adds the pair of CHP001 shields with the three-height deflector and CFCK001 impact buffers, which is the configuration the manufacturer refers to as the complete handguard.

No drilling and no permanent modifications. Each bar is secured at two points, at the end of the handlebar and at an inner mounting point, using the supplied hardware. The manual instructs you not to tighten immediately: first position and adjust all components, then tighten them in sequence to the specified torque values.

The manual specifies 18 N·m for the M8×20 screws and 12 N·m for all M6 screws (M6×12, M6×16, and M6×60). Threadlocker is included in the package. The manual also reminds you to reinstall the screws and components removed from the motorcycle using Honda's specified torque values.

A torque wrench is required to meet the specified 18 and 12 N·m values, in addition to the wrenches for the included M6 and M8 hardware. The manual does not specify the wrench sizes or an assembly time, and refers to the installation video accessed via the QR code.

Aluminum alloy, which LOBOO describes as high-strength to reduce weight without compromising durability. The exact alloy designation is not published by the manufacturer, so we do not report it. The shields in the complete set are made of plastic.

The manufacturer states a length of 307.7 mm, a height of 126.3 mm, and a depth of 197.7 mm, referring to the assembled handguard. LOBOO specifies that the measurements were taken manually and that the actual product is authoritative. The weight is not specified.

No. LOBOO does not publish the weight of this code, either of the brackets alone or of the assembled handguard, so we do not list it. If you need the information before ordering, ask us and we will verify it with the distributor.

Yes: LOBOO states that the upper extension of the shield can be adjusted in height or removed by hand, without tools, in three positions. This applies to the CHP001 shield, so it is a feature of the full-set variants or for those who already have the shields.

Yes, you can find them in the catalog as separate products: the CHP001 shields with deflector, in black or white, and the CFCK001 impact buffers. This is LOBOO's intended way to restore the handguard after a slide without replacing the aluminum bar.

LOBOO does not publish standardized impact tests for this product code, and we do not invent them. What the manufacturer states is the structure: an aluminum bar anchored at two points, with rubber pads on the sides that cushion unexpected impacts. These are handguards for road use and light adventure riding, not approved safety devices.

Yes: all LOBOO products sold on Endurrad are covered by the 24-month statutory consumer warranty. In the event of a lack of conformity, we will handle the claim with the manufacturer.

Yes, you are entitled to return the item within 14 days of delivery under online purchase regulations. The product must be intact and in its original packaging: contact us and we’ll guide you through the process.