The mounting ring is the component that makes it possible to install LOBOO tank bags. It screws onto the existing mounting points around the fuel cap and remains on the motorcycle: the bag is placed on it, the magnets guide it into position, and the mechanical lock holds it in place. To remove it, simply lift it.

Without the ring, the bag cannot be mounted. It is the piece missing when someone buys the bag and discovers they cannot use it, which is why it should be selected together with the bag.

How to choose it

There is no universal ring: the flange design follows the number and position of the fuel cap screws, which vary from motorcycle to motorcycle. Select your motorcycle from the menu - each variant lists the model and LOBOO code - and check the year in the table below.

If you cannot find your model or are unsure about the model year, write to us with the make, model, and year before ordering: we will check the LOBOO documentation.

Attention Honda fuel caps

Some Honda motorcycles have two versions of the fuel cap, with five or seven holes, and the ring is not interchangeable between them. Before ordering, count the screws around your motorcycle's fuel cap: this check helps avoid a return.

It also works on plastic tanks

The grip is not on the bodywork but on the ring, which is mechanically secured. The tank material therefore makes no difference: metal or plastic, the result is the same. This is the difference compared with traditional magnetic bags, which simply will not stay in place on a modern motorcycle with a plastic tank.

There are also no straps running under the seat that can mark the side panels over the miles.

Construction

Aluminum alloy and nylon body. The standard versions measure 122 × 104 mm and weigh 85 grams; the ring for the Harley-Davidson Pan America is larger, 147 × 122 mm, made entirely of aluminum, and weighs 130 grams.

Full compatibility

Installation

The ring replaces the fuel cap trim ring: remove the original screws, position the flange, and screw it back on using the supplied hardware, tightening in a cross pattern and following the torque specifications provided by the motorcycle manufacturer. It takes just a few minutes, requires no drilling, and is fully reversible.

After installation, check that the cap opens and closes freely, that the key enters without force, and that the handlebar does not touch the bag with the steering fully turned. Check the fasteners again after the first 100-200 km.

Why buy from Endurrad

Endurrad specializes in accessories for adventure and touring motorcycles. If you are unsure which ring your motorcycle needs, send us the model and year: we will check before you order.