• Garagela tua moto e solo gli accessori compatibili
  • −5%Benvenuto nel Garage5% for anyone who saves the motorcycle in the app, until 06/30/2027
  • Cerca con una fotol'app riconosce la tua moto
  • Diario mototagliando, revisione, bollo
  • Avvisaminotifica quando un prodotto torna disponibile
  • −5%Primo ordinefatto dall'app
  • Vedi in 3De sulla tua moto, in realtà aumentata
Scarica su App Store Disponibile su Google Play Download

Free shipping on orders over €100 · 14-day returns

Kit di montaggio paramani Barkbusters BHG-046 in alluminio a due punti di fissaggio per Honda, Suzuki, Kawasaki e UralKit Barkbusters BHG-046 montato su Honda NC700X, vista del manubrioKit Barkbusters BHG-046 montato su Honda NC700X, dettaglio della struttura in alluminioKit Barkbusters BHG-046 su Honda NC700X con plastiche STORM, vendute separatamenteKit Barkbusters BHG-046 su Honda NC700X con plastiche STORM, vista lateraleKit Barkbusters BHG-046 montato su Honda VFR1200X Crosstourer
10 Covered motorcycles
2 Mounting points
Included Handlebar weights

Panoramica

In breve

Dieci moto, quattro marche, manubrio 22 mm. Contrappesi inclusi.

Protezione dagli impatti dichiarata.

Due punti di fissaggio e alluminio trattato termicamente.

Dieci moto, quattro marche.

È il codice delle grandi turistiche con manubrio da 22 mm.

Contrappesi già nella scatola.

Non serve riutilizzare quelli originali né comprarli a parte.

Protegge su moto pesanti.

Su una Varadero o una V-Strom carica la caduta da fermo è il danno più frequente.

Quattro plastiche compatibili.

JET, VPS, STORM e CARBON, intercambiabili negli anni sulla stessa struttura.

Prodotto in Australia.

Barkbusters è un marchio di Rideworx Pty Ltd, che produce paramani dal 1984.

Dal produttore BARKBUSTERS

Barkbusters è un marchio di Rideworx Pty Ltd, azienda australiana che progetta e produce paramani per moto dal 1984.

I kit bike-specific sono disegnati sulla geometria del manubrio, non sul marchio della moto: è la ragione per cui un solo codice può coprire dieci modelli di quattro case diverse, e per cui il produttore arriva a escludere per iscritto casi particolari come i sidecar con parabrezza.

Leggi la descrizione completa

The BHG-046 is Barkbusters' mounting kit covering ten models from Honda, Suzuki, Kawasaki, and Ural: large touring and dual-sport bikes with the original 22 mm handlebar. It is the aluminum structure that supports the handguards and protects your hands, levers, and controls from branches, gravel, and low-speed falls.

This is not a universal kit; quite the opposite: it is designed around a precise handlebar geometry shared by those ten motorcycles. As with the entire range, the structure and protective plastics are two separate items: here you are buying the structure only, with hardware and handlebar weights.

Main features

  • Two-point mounting — anchoring at the handlebar end plus a clamp on the straight section. This is the configuration the manufacturer specifies for impact protection.
  • Heat-treated aluminum bar, with a wraparound design and natural aluminum finish.
  • Handlebar weights included — they do not need to be purchased separately.
  • Ten motorcycles, four brands under the same code.
  • Interchangeable plastics — compatible with JET, VPS, STORM, and CARBON, each sold separately.
  • Made in Australia by Rideworx Pty Ltd.

Protection and use

Varadero, Crosstourer, NC700X, V-Strom, Versys 1000: these are touring motorcycles that cover serious mileage and also end up on gravel tracks and unpaved roads. That is where your hands are most exposed, and on a heavy motorcycle, a stationary fall can happen to anyone. The two-point mounting is what Barkbusters designed specifically for this purpose: the bar forms a cage around your hand and transfers the impact to the structure instead of the lever. The single-point configuration, the other option in the range, is specified by the manufacturer only for protection from wind and weather.

Materials and construction

The structure is made of heat-treated aluminum, a process the manufacturer uses to increase strength and impact-absorption capacity. The design is wraparound: it starts at the straight section of the handlebar, curves around the hand, and closes at the end.

Compatibility

Brand Model Notes Years Code
Honda CB500X — 2013-2015 BHG-046-NP
Honda NC700X DCT and manual transmission all stated model years BHG-046-NP
Honda NC750X DCT and manual transmission all stated model years BHG-046-NP
Honda XL1000V Varadero all versions all stated model years BHG-046-NP
Honda VFR1200X Crosstourer non-DCT only up to 2016 BHG-046-NP
Kawasaki KLZ1000 Versys — up to 2014 BHG-046-NP
Suzuki DL650 V-Strom — all stated model years BHG-046-NP
Suzuki DL650XT V-Strom — from 2015 BHG-046-NP
Suzuki DL1000 V-Strom 22 mm handlebar 2002-2019 BHG-046-NP
Ural all models 22 mm handlebar from 2007 BHG-046-NP

Compatibility stated by Barkbusters for motorcycles in original factory configuration. Aftermarket handlebars may have different diameters and wall thicknesses: check the mounting compatibility before purchase. Unsure about your model? Contact us with the model and year.

Manufacturer's stated exclusion: not suitable for motorcycles with a sidecar fitted with a windshield.

If you have a Honda CB500X, check the year. Compatibility here ends in 2015. For later model years: BHG-055 for 2016-2018 and BHG-123 from 2019.

Installation

Installs on the original handlebar, with no drilling or modifications to the motorcycle. The stock handlebar weights must be removed because the structure anchors directly at the handlebar ends, and the weights supplied in the kit are used in their place.

Before fully tightening, check that the throttle, front brake, clutch, and kill switch operate freely and that the steering turns from lock to lock without interference. Check the tightness again after the first 50 km. The complete procedure and warnings are provided in the official INS-BHG-046-NP instructions, attached to this listing in the Manufacturer documents section.

What you will find in the box

  • Two heat-treated aluminum bars
  • Clamps for the straight section of the handlebar
  • Complete mounting hardware
  • Handlebar weights

What is NOT included

  • Protective plastics. They must be selected and ordered separately from the JET, VPS, STORM, and CARBON series. EGO plastics are not compatible with this structure.
  • LED lights and other accessories in the range, which remain separate items.

Why choose Barkbusters

Barkbusters is a brand of Rideworx Pty Ltd, an Australian company that has designed and manufactured motorcycle handguards since 1984. The range is built around a precise idea: the structure is motorcycle-specific, while the plastics are universal within the system. Buy the right structure once, then choose the protection you need, replace it if it gets damaged or if your type of use changes, without replacing everything.

Why buy it from Endurrad

Endurrad supplies accessories for touring, adventure, and enduro motorcycles: compatibility checked against the manufacturer's documentation, official instructions attached to the listing, and assistance before purchase if your model is unclear. Free shipping in Italy on orders over €100 and in Europe on orders over €250, returns within 14 days, 1-year warranty. See the complete Barkbusters range.

Nella confezione

  • Due barre in alluminio — trattate termicamente, finitura naturale.
  • Morsetti e viteria completa — per manubrio originale da 22 mm.
  • Contrappesi manubrio inclusi — sostituiscono quelli di serie, che vanno rimossi.
  • Plastiche di protezione NON incluse — da scegliere fra JET, VPS, STORM e CARBON.

BHG-046 · 10 models for Honda, Suzuki, Kawasaki and Ural · 22 mm handlebar

The kit of the great sport touring motorcycles of the 2010s

Varadero, Crosstourer, NC700X, V-Strom, and Versys 1000 share the same handlebar.

A code for the 22 mm large tourist models
01

A code for the 22 mm large tourist models

What you see is the complete kit: two heat-treated aluminum bars, clamps, fasteners, and handlebar counterweights. It fits ten models from Honda, Suzuki, Kawasaki, and Ural because they share the same 22 mm handlebar geometry within their generation.

Mounted on the Honda NC700X
02

Mounted on the Honda NC700X

The bar anchors at two points: inside the end of the handlebar, replacing the original bar-end weight, and on a clamp that closes around the straight section in front of the controls. This is the configuration Barkbusters specifies for impact protection.

With STORM plastics: extended coverage
03

With STORM plastics: extended coverage

The same structure with STORM plastics, sold separately. It is the series with the most extensive coverage in the range, designed for road use and winter riding: on touring motorcycles like these, it is the most common choice.

And on the Honda VFR1200X Crosstourer
04

And on the Honda VFR1200X Crosstourer

For the Crosstourer, the manufacturer lists only non-DCT versions through 2016. This is the kind of distinction that matters more than average for this code: ten models from four brands, each with its own year range and conditions.

Scheda tecnica

Specifiche tecniche

Tutti i dati

Compatibility

Motorcycle
10 Honda, Suzuki, Kawasaki, and Ural models Complete list with make, model, and years in the compatibility table
Years
Variables by model Each model has its own stated range: it does not extend by deduction.
Handlebar
22 mm The manufacturer specifies the diameter for the DL1000 V-Strom and all Ural models
Declared exclusion
Sidecar with windshield The manufacturer explicitly excludes motorcycles with a sidecar equipped with a windshield.
Compatible plastics
JET, VPS, STORM and CARBON Four series, each sold separately. The EGO ones are not compatible.

Structure and materials

Structure
Heat-treated aluminum bar Wraparound design, a treatment chosen by the manufacturer for impact resistance and protection
Finish
Natural aluminum
Production
Australia Rideworx Pty Ltd

Assembly

Mounting type
Two points Handlebar end plus clamp on the straight section
Retightening check
after 50 km Manufacturer-recommended medium-strength threadlocker

Protection

Impact protection
Declared Barkbusters declares two-point products designed for impact protection

Packaging

Content
Aluminum bars, clamps, hardware and handlebar weights Protective plastics NOT included

Dati dichiarati da Barkbusters (Rideworx Pty Ltd) sulla pagina ufficiale del codice BHG-046-NP e sulle istruzioni di montaggio INS-BHG-046-NP. Peso e dimensioni non sono dichiarati dal produttore in forma numerica.

Manuale d'usoDocumento originale BARKBUSTERS Scarica ↓

Prima di ordinare

Montaggio e requisiti

Come si monta

  1. Verifica che il manubrio sia quello originale da 22 mm e che modello e anno rientrino in tabella.
  2. Rimuovi i paramani originali, se presenti, e i contrappesi di serie: al loro posto vanno quelli forniti nel kit.
  3. Monta il morsetto sulla sezione dritta del manubrio, davanti ai comandi, senza serrare a fondo.
  4. Fissa la barra in alluminio all estremità del manubrio e al morsetto, poi portala in posizione.
  5. Monta le plastiche che hai scelto, allinea tutto e serra.
  6. Verifica il funzionamento di gas, freno anteriore, frizione e interruttore di arresto, e che lo sterzo giri liberamente da fondo a fondo. Ricontrolla il serraggio dopo i primi 50 km.
Istruzioni complete e note di sicurezza

Le istruzioni ufficiali INS-BHG-046-NP sono allegate a questa scheda.

  1. Verifica che il manubrio sia quello originale da 22 mm e che modello e anno rientrino in tabella.
  2. Rimuovi i paramani originali, se presenti, e i contrappesi di serie: al loro posto vanno quelli forniti nel kit.
  3. Monta il morsetto sulla sezione dritta del manubrio, davanti ai comandi, senza serrare a fondo.
  4. Fissa la barra in alluminio all estremità del manubrio e al morsetto, poi portala in posizione.
  5. Monta le plastiche che hai scelto, allinea tutto e serra.
  6. Verifica il funzionamento di gas, freno anteriore, frizione e interruttore di arresto, e che lo sterzo giri liberamente da fondo a fondo. Ricontrolla il serraggio dopo i primi 50 km.

Frenafiletti di media resistenza su tutti i fissaggi. Il produttore considera il montaggio dei paramani un intervento rilevante per la sicurezza, da affidare a un tecnico se non hai dimestichezza.

A chi viaggia con una V-Strom, una Varadero o una NC750X e mette in conto sterrati e strade bianche: sono moto pesanti, e una caduta da fermo basta a piegare una leva.

A chi ha una moto ormai fuori produzione e vuole proteggere leve e comandi, che su questi modelli cominciano a essere ricercati.

A chi ha una Ural senza parabrezza sul sidecar: il produttore la dichiara compatibile, ma con quella esclusione precisa.

Non è la scelta giusta per una Crosstourer DCT o per una CB500X dal 2016 in avanti: lì il produttore dichiara codici diversi.

Montate su moto di 3 marche

HondaKawasakiSuzuki
Hai un dubbio sulla compatibilità?Mandaci una foto su WhatsApp: ti rispondiamo noi. Scrivici →

Domande frequenti

Le domande che ci fate più spesso

Are the protective plastic parts included?

No. Here you purchase only the aluminum frame with the hardware and counterweights. The JET, VPS, STORM, or CARBON plastics are ordered separately, remain interchangeable on the same frame, and can be changed to a different color even years later.

My model is listed in the table, but the year isn’t: can I still install it?

No. For this code, the intervals are particularly specific to each model and cannot be extended by deduction. Send us the model and registration year, and we’ll verify the correct code before you order.

Does the same kit really fit four different brands?

Yes, and the manufacturer states it. What matters is not the brand but the geometry of the 22 mm handlebar and the space around the controls: the ten listed models are compatible with the same structure and hardware.

Are the handlebar counterweights included?

Yes, the manufacturer states that they are included with this code. The motorcycle's standard bar-end weights must be removed because the structure attaches precisely to the end of the handlebar, and the supplied ones are installed in their place.

I have a Ural with a sidecar: is that okay?

It depends on the sidecar. The manufacturer states that all Ural models from 2007 onward have 22 mm handlebars, but explicitly excludes motorcycles with a sidecar equipped with a windshield: the windshield's clearance causes interference. It is one of the few exclusions spelled out in black and white in the range.

I have a VFR1200X Crosstourer DCT: does it qualify?

No. For this code, the manufacturer lists the Crosstourer only in non-DCT versions and up to 2016. It’s an unusual distinction, because on other models, DCT and manual transmission versions are included together: not here. Write to us and we’ll check the alternative.

Avvisami quando disponibile

Ti scriviamo appena Barkbusters BHG-046 handguard mounting kit for Honda NC750X, Varadero, Crosstourer, Suzuki V-Strom and Kawasaki Versys 1000 (Two-point, aluminum) torna disponibile.