11.600per pod

Lumen

2flood e spot

Optical circuits

50-60mm

Terminals

DialDimthe ring

Controller

Equipment

Kit contents

Two D7 PRO spotlights, black articulated clamps for 50 to 60 mm bars, and a universal DialDim controller

DENALI codes DNL.D7P.050, LAH.00.10500-B, and DNL.WHS.20500

Lighting

Luminous flux

11.600

Independent dual circuit, central flood and external spot, both dimmable

Optics

X-Lens System

Clear, amber, and yellow lenses included

With the amber lens, the central circuit can flash together with the turn signals

Protection

Water resistance

IP68 and IP69K

Assembly

Terminals

Articulated, from 50 to 60 mm

Measurement for large tubes: check the bar diameter before ordering

Command

Controller

Universal DialDim

Ring switch with multicolor illuminated ring, for mounting on the handlebar

Compatibility

Models

Ducati Scrambler 800 from 2015 and Scrambler 1100 from 2018 to 2024

Composizione dalla scheda ufficiale DENALI, che dichiara il controller DialDim. Il listino Forbikes indica il CANsmart: in verifica.

D7 PRO e DialDim per lo Scrambler

Everything you need to know before ordering

Technical specifications, equipment, delivery, and warranty: below you’ll find every detail verified against the official DENALI documentation.

Description D7 PRO auxiliary light kit with DialDim controller for Ducati Scrambler

Code DNL22KIT012 — DENALI code DNL.22.KIT.012

The flagship package for the Scrambler: two dual-circuit D7 PRO auxiliary lights, articulated clamps for 50 to 60 mm bars, and the DialDim controller with its dial.

DialDim is a universal controller: it does not connect to the motorcycle's bus or read the CAN bus, but puts all adjustment functions on a handlebar-mounted dial. On the Scrambler, this is the solution specified by DENALI, because no CANsmart control unit exists for this motorcycle.

Kit contents: 2× D7 PRO auxiliary lights with X-Lens system (DNLD7P050), 1× black articulated clamps for 50 to 60 mm bars (LAH0010500B), 1× universal DialDim controller (DNLWHS20500).

Check the diameter before ordering: the included clamps are for bars measuring 50 to 60 mm.

Declared compatibility: Ducati Scrambler 800 from 2015 onward and Scrambler 1100 from 2018 to 2024.

Why choose it

Il D7 PRO ha due circuiti indipendenti nello stesso corpo e il sistema X-Lens a innesto rapido per cambiare lente senza smontarlo.

Il controller compreso è il DialDim universale, non una centralina CANsmart: per lo Scrambler una CANsmart dedicata non esiste, e il DialDim porta tutta la regolazione su una manopola da manubrio.

Who is it recommended for

A chi vuole il massimo sullo Scrambler. È il pacchetto di punta disponibile per questa moto.

A chi preferisce la manopola. Con il DialDim la regolazione è diretta, senza passare dai comandi originali.

Misura prima di ordinare. I morsetti sono da 50-60 mm, non da paramotore.

Complete technical specification sheet
Technical data
  • Faretti: 2× D7 PRO a doppio circuito, sistema X-Lens
  • Controller: DialDim universale, manopola da manubrio, non legge il CANbus
  • Morsetti: articolati neri, per barre da 50 a 60 mm
  • Alimentazione: dalla batteria, senza innesto sul bus della moto
  • Compatibilità: Ducati Scrambler 800 dal 2015, Scrambler 1100 2018-2024
Documents and manufacturer

I faretti ausiliari vanno installati e impiegati nel rispetto delle prescrizioni del codice della strada su numero, posizione e altezza dei proiettori supplementari.

DENALI riconosce 5 anni di garanzia convenzionale del produttore, che si aggiunge ai 24 mesi di garanzia legale di conformità.

How does it work, in detail?

  • The D7 PRO on the Scrambler, with a rotary dial control.
Two lights within a single body

Two lights within a single body

The D7 PRO has two independent circuits in the same spotlight: the central amber or yellow one and the outer white one. The quick-change X-Lens system allows you to change the lens without removing the spotlight.

The DialDim, not the CANsmart

The DialDim, not the CANsmart

The included controller is the DialDim: universal, with its handlebar knob, it does not connect to the motorcycle's bus and does not read the CAN bus. This is the solution intended by DENALI for the Scrambler, because a CANsmart control unit does not exist for this motorcycle. In return, all adjustment is under your thumb, without using the original controls.

Clamps from 50 to 60 mm

Clamps from 50 to 60 mm

The included clamps fit large-diameter bars, from 50 to 60 mm, and can be adjusted after installation. They are not the ones for engine guards, which fit tubes from 21 to 29 mm: measure the point where you want to mount them before ordering.

FAQs

For more information, see our FAQ of frequently asked questions.

Which controller is included in this kit?

The universal DialDim (DNLWHS20500), not a CANsmart control unit. The official DENALI page identifies it as the DialDim, while some listings indicate the CANsmart: we followed the manufacturer’s information, especially since there is no dedicated CANsmart for the Scrambler. If this is decisive for you, contact us before ordering.

What is the difference between DialDim and CANsmart?

The CANsmart connects to the bike's bus and brings the auxiliary lights under the original controls, but it only exists for the models DENALI developed it for. The DialDim is universal: it connects to the battery, and all adjustments are made using a knob you mount on the handlebar. On bikes without a dedicated CANsmart, it's the only way to have complete control of the auxiliary lights.

Where are the clamps mounted?

For bars 50 to 60 mm in diameter, much wider than crash bar clamps. Measure the point where you want to mount the lights before ordering: if the diameter doesn’t fit, we have clamps in other sizes in our catalog.

Didn’t find the answer you were looking for?

Don't hesitate to contact us

Buying guides, technical comparisons, and news about accessories for adventure motorcycles

Before choosing

View all

Borsa serbatoio moto LOBOO montata su un serbatoio, esempio di equipaggiamento per una Honda XL750 Transalp

Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

From 2026, the Honda XL750 Transalp comes with the E-Clutch as standard on both versions, full-power and A2, at the same price of €10,990. Official technical specifications, what really changes, and how to equip it for touring with Endurrad catalog accessories.

Read moreabout Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

Maxi enduro con numero di gara su una strada bianca dell'Appennino tra boschi autunnali durante il Transitalia Marathon

Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle

From September 25 to October 1, 2026, from Rimini to Termoli in four stages and over 1,000 km: dates, route, Complex, Plain and Road tracks, costs, permitted motorcycles, luggage rules, and a complete checklist for preparing the maxi enduro.

Read moreabout Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle

Coppia di riser manubrio LOBOO montati su BMW R 1300 GS, finitura anodizzata argento

Motorcycle handlebar risers: which height should you choose for your bike?

Rise or setback? The complete range of LOBOO handlebar risers for BMW GS, KTM, Honda, Triumph, and other adventure bikes: stated measurements, real prices, and the check you should always perform after installation.

Read moreabout Motorcycle handlebar risers: which height should you choose for your bike?