8models

Compatible Yamaha products

1991–2017

Production years covered

2mm

Allen key included

Operation

Type

Friction accelerator lock

Mechanical cruise control: it maintains throttle opening, not speed

Command

Knurled ring on the counterweight

It tightens and loosens between the little finger and palm, without letting go of the knob

Collar thread

Left-handed

The adjustment screw calibrates its resistance with the 2 mm key

Assembly

Position

Right handlebar end

Replaces the original counterweight

Handlebar setup

Original black counterweights

See the compatibility table

Kit and maintenance

In the kit

3 items

Kaoko counterweight with friction ring, thrust washer, 2 mm Allen key

Maintenance

Once a year

Disassemble, clean the threads with mild soap, and lubricate them with petroleum jelly

Manufacturer code

YAM300

Endurrad KA-YAM300 code

Dati dal foglio istruzioni Kaoko e dalla tabella di compatibilità del produttore.

Cruise control meccanico per Yamaha FZ1, FZ6, TDM 900 e XJR1300, nero

Tutto quello che devi sapere prima di ordinare

Scheda tecnica, dotazione, consegna e garanzia: qui sotto ogni dettaglio verificato sulla documentazione ufficiale Kaoko.

Descrizione Cruise control for Yamaha FZ1, FZ6, TDM 900 and XJR1300, black

The throttle stays where you leave it, while your right hand can rest. This mechanical cruise control for the Yamaha FZ1, FZ6, TDM 900 and XJR1300, in black, replaces the right handlebar end weight: as you open the throttle, tighten the ring with your little finger and the grip maintains the selected opening. No electronics, no wiring, no modifications to the motorcycle.

Which Yamaha models it fits

Motorcycle Years Handlebar setup
Yamaha TDM 850 1991–2001 Original black bar ends
Yamaha XJR1200 1995–1999 Original black bar ends
Yamaha XJR1300 1998–2014 Original black bar ends
Yamaha FZ1 2001–2017 Original black bar ends
Yamaha FZ1 S 2001–2017 Original black bar ends
Yamaha TDM 900 2002–2011 Original black bar ends
Yamaha FZ6 2004–2009 Original black bar ends
Yamaha FZ7 2007–2015 Original black bar ends

Different setup from those listed? Tell us the model and year before ordering.

How it works

The knurled ring screws onto the bar end and applies friction to restrict throttle grip rotation. When tightened, it holds the throttle at the selected opening; when loosened, the grip moves freely again and closes by itself. It locks the throttle opening; it is not a speed regulator: the motorcycle slows down uphill, accelerates downhill, and does not disengage automatically when you brake. You can always open and close the throttle by hand even when the device is engaged.

What you receive and how to fit it

The package includes: Kaoko bar end with friction ring, thrust washer, and a 2 mm Allen key. Remove the original right bar end, install the Kaoko one, and adjust the ring resistance with the 2 mm key. The manufacturer's instructions can be downloaded from the product page.

All models are in the Kaoko cruise control range.

Perché sceglierlo
  • Mano destra a riposo: nei trasferimenti a velocità costante polso e avambraccio non devono più tenere aperto il gas.
  • Gas più stabile in fuoristrada: sullo sterrato sconnesso riduce le aperture involontarie dovute ai colpi.
  • Zero elettronica: niente cavi né centraline, prende il posto del contrappeso originale.
  • Si comanda senza lasciare la manopola: la ghiera si stringe e si allenta tra mignolo e palmo.
A chi è consigliato
  • A chi macina lunghi tratti di autostrada e statale.
  • A chi fa mototurismo e vuole il gas più stabile sugli sterrati sconnessi.
  • A chi a fine giornata sente la mano destra affaticata o intorpidita.

Il produttore lo destina a motociclisti esperti, da usare solo quando la strada lo consente.

Scheda tecnica completa
Dati tecnici
  • Tipo: blocco acceleratore meccanico a frizione (cruise control meccanico)
  • Codice produttore: YAM300
  • Montaggio: al posto del contrappeso destro del manubrio
  • Allestimento: contrappesi originali neri
  • Nel kit: contrappeso Kaoko con ghiera di frizione, rondella reggispinta, chiave a brugola da 2 mm
  • Filettatura della ghiera: sinistrorsa, con grano di regolazione
  • Manutenzione: una volta l'anno, pulizia dei filetti con sapone neutro e vaselina
Documenti e produttore

Istruzioni di montaggio: foglio Kaoko in inglese con le fasi di montaggio, l'uso e la manutenzione, scaricabile qui sotto.

Produttore: Kaoko, specialista dei blocchi acceleratore per moto. Design registrati in Sudafrica e brevetti USA D593,462 S, D593,463 S e D593,464 S.

Avvertenza del produttore: da disinserito la manopola del gas deve aprirsi e richiudersi liberamente. Controllalo sempre dopo il montaggio e dopo ogni regolazione.

How does it work in detail

  • Tighten the ring with your pinky and the throttle stays where you left it: your right hand rests, with no electronics and no modifications to the motorcycle.
What’s included in the package?

What’s included in the package?

The package includes: Kaoko counterweight with friction ring, thrust washer, 2 mm Allen key.

FAQs

Per ulteriori informazioni, consulta la nostra FAQ delle domande frequenti.

Is it cruise control like the electronic kind in cars?

No. It is a mechanical throttle lock: it maintains the throttle opening you selected, not the speed. The motorcycle slows down uphill, accelerates downhill, and it does not disengage automatically when you brake or pull in the clutch. It is intended for highway and main-road stretches at a constant speed, when road conditions allow it.

How do you turn it on and off?

As you open the throttle, squeeze the ring between your little finger and palm: the ring screws in and creates the friction that holds the grip in position. To disengage it, make the same gesture while closing the throttle. When disengaged, the grip should open and close freely on its own, as if the device were not installed.

Can I still turn off the gas with the device inserted?

Yes. The ring slows the rotation of the throttle but does not lock it: you can always open and close the throttle by hand; the grip simply feels a little stiffer. The manufacturer recommends using it only when road conditions permit and keeping it disengaged in all other situations.

Do I need to modify the motorcycle to install it?

No. The Kaoko cruise control replaces the right handlebar bar-end weight: no drilling and no wiring. You rarely need to move the throttle housing a few millimeters along the handlebar by loosening its screws and tightening them again to the torque specified by the manufacturer. All the steps are in the instructions downloadable from the product page.

Which handlebar setup is it mounted with?

According to the manufacturer: original black bar-end weights. It mounts on the standard motorcycle, without adapters. If your motorcycle has different handlebar accessories, contact us before ordering.

Non hai trovato la risposta che cercavi?

Non esitate a contattarci

Guide all'acquisto, confronti tecnici e novità sugli accessori per moto adventure

Prima di scegliere

View all

Piastra top case LOBOO JPT131WA montata sul portapacchi originale della BMW R 1300 GS

Motorcycle top case plate: which one to choose to mount the top case on your motorcycle

In brief. An aluminum top case does not attach directly to the motorcycle: it requires a top case plate, the interface connecting the luggage rack (standard or added) to the bottom of the top case. On Endurrad, you can find...

Read moreabout Motorcycle top case plate: which one to choose to mount the top case on your motorcycle

Honda XL750 Transalp 2026 in azione

Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

From 2026, the Honda XL750 Transalp comes with the E-Clutch as standard on both versions, full-power and A2, at the same price of €10,990. Official technical specifications, what really changes, and how to equip it for touring with Endurrad catalog accessories.

Read moreabout Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

Maxi enduro con numero di gara su una strada bianca dell'Appennino tra boschi autunnali durante il Transitalia Marathon

Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle

From September 25 to October 1, 2026, from Rimini to Termoli in four stages and over 1,000 km: dates, route, Complex, Plain and Road tracks, costs, permitted motorcycles, luggage rules, and a complete checklist for preparing the maxi enduro.

Read moreabout Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle