3models

compatible motorcycles

2013–2022

Production years covered

2mm

Allen key included

Operation

Type

Friction accelerator lock

Mechanical cruise control: it maintains throttle opening, not speed

Command

Knurled ring on the counterweight

It tightens and loosens between the little finger and palm, without letting go of the knob

Collar thread

Left-handed

The adjustment screw calibrates its resistance with the 2 mm key

Assembly

Position

Right handlebar end

Replaces the original counterweight

Handlebar setup

Original plastic handguards

See the compatibility table

Kit and maintenance

In the kit

4 elements

Left and right Kaoko counterweights, friction ring, thrust washer, 2 mm Allen key

Maintenance

Once a year

Disassemble, clean the threads with mild soap, and lubricate them with petroleum jelly

Manufacturer code

VIBRASTOP2

Endurrad code KA-VIBRASTOP2

Dati dal foglio istruzioni Kaoko e dalla tabella di compatibilità del produttore.

Cruise control meccanico per KTM 1050, 1190 e 1290 Adventure

Everything you need to know before ordering

Technical specifications, equipment, delivery and warranty: below, every detail verified against the official Kaoko documentation.

Description Anti-vibration cruise control for KTM 1050, 1190 and 1290 Adventure

The throttle stays where you leave it, and your right hand can rest. This mechanical cruise control for the KTM 1050, 1190, and 1290 Adventure replaces the right handlebar end weight: as you open the throttle, tighten the ring with your little finger and the grip maintains the selected opening. No electronics, no wiring, and no modifications to the motorcycle.

Which motorcycles it fits

Motorcycle Years Handlebar setup
KTM 1190 Adventure 2013–2018 Original plastic handguards
KTM 1050 Adventure 2015–2022 Original plastic handguards
KTM 1290 Super Adventure 2015–2022 Original plastic handguards

Only compatible with the original handguards. The kit includes right and left end weights designed to also reduce handlebar vibrations. Is your setup different from those listed? Tell us the model and year before ordering.

How it works

The knurled ring screws onto the end weight and slows the rotation of the throttle grip. When tightened, it holds the throttle at the selected opening; when loosened, the grip moves freely again and closes by itself. It locks the throttle opening; it is not a speed regulator: the motorcycle slows down uphill, accelerates downhill, and the device does not disengage automatically when you brake. You can always open and close the throttle by hand, even when the device is engaged.

What you receive and how to install it

The package includes: left and right Kaoko end weights, friction ring, thrust washer, and 2 mm Allen key. Remove the original right end weight, install the Kaoko one, and adjust the ring resistance with the 2 mm Allen key. The manufacturer's instructions can be downloaded from the product page.

All models are in the Kaoko cruise control range.

Why choose it
  • Mano destra a riposo: nei trasferimenti a velocità costante polso e avambraccio non devono più tenere aperto il gas.
  • Gas più stabile in fuoristrada: sullo sterrato sconnesso riduce le aperture involontarie dovute ai colpi.
  • Zero elettronica: niente cavi né centraline, prende il posto del contrappeso originale.
  • Si comanda senza lasciare la manopola: la ghiera si stringe e si allenta tra mignolo e palmo.
Who is it recommended for
  • A chi macina lunghi tratti di autostrada e statale.
  • A chi fa mototurismo e vuole il gas più stabile sugli sterrati sconnessi.
  • A chi a fine giornata sente la mano destra affaticata o intorpidita.

Il produttore lo destina a motociclisti esperti, da usare solo quando la strada lo consente.

Complete technical specification sheet
Technical data
  • Tipo: blocco acceleratore meccanico a frizione (cruise control meccanico)
  • Codice produttore: VIBRASTOP2
  • Montaggio: al posto del contrappeso destro del manubrio
  • Allestimento: paramani originali in plastica
  • Nel kit: contrappesi Kaoko sinistro e destro, ghiera di frizione, rondella reggispinta, chiave a brugola da 2 mm
  • Filettatura della ghiera: sinistrorsa, con grano di regolazione
  • Manutenzione: una volta l'anno, pulizia dei filetti con sapone neutro e vaselina
Documents and manufacturer

Istruzioni di montaggio: foglio Kaoko in inglese con le fasi di montaggio, l'uso e la manutenzione, scaricabile qui sotto.

Produttore: Kaoko, specialista dei blocchi acceleratore per moto. Design registrati in Sudafrica e brevetti USA D593,462 S, D593,463 S e D593,464 S.

Avvertenza del produttore: da disinserito la manopola del gas deve aprirsi e richiudersi liberamente. Controllalo sempre dopo il montaggio e dopo ogni regolazione.

How does it work in detail

  • Tighten the ring with your pinky and the throttle stays where you left it: your right hand rests, with no electronics and no modifications to the motorcycle.
What’s included in the package?

What’s included in the package?

The package includes: left and right Kaoko bar ends, friction ring, thrust washer, 2 mm Allen key.

FAQs

For more information, see our FAQ of frequently asked questions.

Is it cruise control like the electronic kind in cars?

No. It is a mechanical throttle lock: it maintains the throttle opening you selected, not the speed. The motorcycle slows down uphill, accelerates downhill, and it does not disengage automatically when you brake or pull in the clutch. It is intended for highway and main-road stretches at a constant speed, when road conditions allow it.

How do you turn it on and off?

As you open the throttle, squeeze the ring between your little finger and palm: the ring screws in and creates the friction that holds the grip in position. To disengage it, make the same gesture while closing the throttle. When disengaged, the grip should open and close freely on its own, as if the device were not installed.

Can I still turn off the gas with the device inserted?

Yes. The ring slows the rotation of the throttle but does not lock it: you can always open and close the throttle by hand; the grip simply feels a little stiffer. The manufacturer recommends using it only when road conditions permit and keeping it disengaged in all other situations.

Do I need to modify the motorcycle to install it?

No. The Kaoko cruise control replaces the right handlebar bar-end weight: no drilling and no wiring. You rarely need to move the throttle housing a few millimeters along the handlebar by loosening its screws and tightening them again to the torque specified by the manufacturer. All the steps are in the instructions downloadable from the product page.

Which handlebar setup is it mounted with?

According to the manufacturer: original plastic handguards. Only with the original handguards. The kit includes right and left bar-end weights, also designed to reduce handlebar vibrations. If your motorcycle has different handlebar accessories, contact us before ordering.

Didn’t find the answer you were looking for?

Don't hesitate to contact us

Buying guides, technical comparisons, and news about accessories for adventure motorcycles

Before choosing

View all

Triumph Tiger 900 Rally Pro attuale, vista frontale con paramani Barkbusters, parabrezza e faro anteriore

Nuova Triumph Tiger 1200 e Tiger 900 2027: date di presentazione, cosa è ufficiale e cosa aspettarsi

Triumph svela la Tiger 1200 il 27 ottobre e mostra la Tiger 900 il 15 dicembre 2026. Cosa è ufficiale, cosa è solo ipotesi e cosa fare con gli accessori della tua Tiger.

Read moreabout Nuova Triumph Tiger 1200 e Tiger 900 2027: date di presentazione, cosa è ufficiale e cosa aspettarsi

Caricatore bidirezionale LOBOO C36 visto di tre quarti, display LED con tensione e indicatori SLA, LiON, IN, OUT

100 W USB-C charger for motorcycles: how much current it draws from the electrical system and what you can really connect

A 100 W USB-C socket draws at least 8.3 A from a 12 V system, and the 130 W LOBOO C36 draws at least 10.8 A. Charging profiles, 5 A cable, input mode, installation, and stated limits.

Read moreabout 100 W USB-C charger for motorcycles: how much current it draws from the electrical system and what you can really connect

Prototipo della KTM 990 Adventure in curva, vista di tre quarti anteriore con faro e cupolino

KTM 990 Adventure: what is really known, what EICMA 2026 will reveal, and what to do if you have a 790 or 890 Adventure

The KTM 990 Adventure is not official: KTM has only confirmed its presentation at EICMA 2026 on November 3. What is known, what is not, and what to do if you have a 790 or 890 Adventure.

Read moreabout KTM 990 Adventure: what is really known, what EICMA 2026 will reveal, and what to do if you have a 790 or 890 Adventure