Free shipping on orders over €100 · 14-day returns

Kit cruise control Kaoko VIBRASTOP2 per KTM 1050, 1190 e 1290 Adventure
3 models compatible motorcycles
2013–2022 Production years covered
2 mm Allen key included

Panoramica

In breve

Cruise control meccanico per KTM 1050, 1190 e 1290 Adventure

Mano destra a riposo

nei trasferimenti a velocità costante polso e avambraccio non devono più tenere aperto il gas.

Gas più stabile in fuoristrada

sullo sterrato sconnesso riduce le aperture involontarie dovute ai colpi.

Zero elettronica

niente cavi né centraline, prende il posto del contrappeso originale.

Si comanda senza lasciare la manopola

la ghiera si stringe e si allenta tra mignolo e palmo.

Leggi la descrizione completa

The throttle stays where you leave it, and your right hand can rest. This mechanical cruise control for the KTM 1050, 1190, and 1290 Adventure replaces the right handlebar end weight: as you open the throttle, tighten the ring with your little finger and the grip maintains the selected opening. No electronics, no wiring, and no modifications to the motorcycle.

Which motorcycles it fits

Motorcycle Years Handlebar setup
KTM 1190 Adventure 2013–2018 Original plastic handguards
KTM 1050 Adventure 2015–2022 Original plastic handguards
KTM 1290 Super Adventure 2015–2022 Original plastic handguards

Only compatible with the original handguards. The kit includes right and left end weights designed to also reduce handlebar vibrations. Is your setup different from those listed? Tell us the model and year before ordering.

How it works

The knurled ring screws onto the end weight and slows the rotation of the throttle grip. When tightened, it holds the throttle at the selected opening; when loosened, the grip moves freely again and closes by itself. It locks the throttle opening; it is not a speed regulator: the motorcycle slows down uphill, accelerates downhill, and the device does not disengage automatically when you brake. You can always open and close the throttle by hand, even when the device is engaged.

What you receive and how to install it

The package includes: left and right Kaoko end weights, friction ring, thrust washer, and 2 mm Allen key. Remove the original right end weight, install the Kaoko one, and adjust the ring resistance with the 2 mm Allen key. The manufacturer's instructions can be downloaded from the product page.

All models are in the Kaoko cruise control range.

Nella confezione

  • Contrappesi Kaoko sinistro e destro.
  • Ghiera di frizione.
  • Rondella reggispinta.
  • Chiave a brugola da 2 mm.
  • Istruzioni di montaggio scaricabili dalla scheda, in inglese.

VIBRASTOP2 · Adjustable friction · Replaces the right counterweight · 2 mm key included

How does it work in detail

Tighten the ring with your pinky and the throttle stays where you left it: your right hand rests, with no electronics and no modifications to the motorcycle.

What’s included in the package?
01

What’s included in the package?

The package includes: left and right Kaoko bar ends, friction ring, thrust washer, 2 mm Allen key.

Scheda tecnica

Specifiche tecniche

Tutti i dati

Operation

Type
Friction accelerator lock Mechanical cruise control: it maintains throttle opening, not speed
Command
Knurled ring on the counterweight It tightens and loosens between the little finger and palm, without letting go of the knob
Collar thread
Left-handed The adjustment screw calibrates its resistance with the 2 mm key

Assembly

Position
Right handlebar end Replaces the original counterweight
Handlebar setup
Original plastic handguards See the compatibility table

Kit and maintenance

In the kit
4 elements Left and right Kaoko counterweights, friction ring, thrust washer, 2 mm Allen key
Maintenance
Once a year Disassemble, clean the threads with mild soap, and lubricate them with petroleum jelly
Manufacturer code
VIBRASTOP2 Endurrad code KA-VIBRASTOP2

Dati dal foglio istruzioni Kaoko e dalla tabella di compatibilità del produttore.

Manuale d'usoDocumento originale KAOKO Scarica ↓

Prima di ordinare

Montaggio e requisiti

Come si monta

Istruzioni complete e note di sicurezza

Istruzioni di montaggio: foglio Kaoko in inglese con le fasi di montaggio, l'uso e la manutenzione, scaricabile qui sotto.

Produttore: Kaoko, specialista dei blocchi acceleratore per moto. Design registrati in Sudafrica e brevetti USA D593,462 S, D593,463 S e D593,464 S.

Avvertenza del produttore: da disinserito la manopola del gas deve aprirsi e richiudersi liberamente. Controllalo sempre dopo il montaggio e dopo ogni regolazione.

  • A chi macina lunghi tratti di autostrada e statale.
  • A chi fa mototurismo e vuole il gas più stabile sugli sterrati sconnessi.
  • A chi a fine giornata sente la mano destra affaticata o intorpidita.

Il produttore lo destina a motociclisti esperti, da usare solo quando la strada lo consente.

Per moto Ktm

KTM
Hai un dubbio sulla compatibilità?Mandaci una foto su WhatsApp: ti rispondiamo noi. Scrivici →

Domande frequenti

Le domande che ci fate più spesso

Is it cruise control like the electronic kind in cars?

No. It is a mechanical throttle lock: it maintains the throttle opening you selected, not the speed. The motorcycle slows down uphill, accelerates downhill, and it does not disengage automatically when you brake or pull in the clutch. It is intended for highway and main-road stretches at a constant speed, when road conditions allow it.

How do you turn it on and off?

As you open the throttle, squeeze the ring between your little finger and palm: the ring screws in and creates the friction that holds the grip in position. To disengage it, make the same gesture while closing the throttle. When disengaged, the grip should open and close freely on its own, as if the device were not installed.

Can I still turn off the gas with the device inserted?

Yes. The ring slows the rotation of the throttle but does not lock it: you can always open and close the throttle by hand; the grip simply feels a little stiffer. The manufacturer recommends using it only when road conditions permit and keeping it disengaged in all other situations.

Do I need to modify the motorcycle to install it?

No. The Kaoko cruise control replaces the right handlebar bar-end weight: no drilling and no wiring. You rarely need to move the throttle housing a few millimeters along the handlebar by loosening its screws and tightening them again to the torque specified by the manufacturer. All the steps are in the instructions downloadable from the product page.

Which handlebar setup is it mounted with?

According to the manufacturer: original plastic handguards. Only with the original handguards. The kit includes right and left bar-end weights, also designed to reduce handlebar vibrations. If your motorcycle has different handlebar accessories, contact us before ordering.

Avvisami quando disponibile

Ti scriviamo appena Anti-vibration cruise control for KTM 1050, 1190 and 1290 Adventure torna disponibile.

Dal blog

Prima di scegliere

Tutti gli articoli
Motorcycle license renewal and the new Highway Code: 10 years up to age 65, what changes and what applies today checklist

Motorcycle license renewal and the new Highway Code: 10 years up to age 65, what changes and what applies today

Leggi l'articolo → Road sign with a semicircle and black lines: what does it mean, and when do you have to keep your motorcycle lights on? faretti moto

Road sign with a semicircle and black lines: what does it mean, and when do you have to keep your motorcycle lights on?

Leggi l'articolo → BMW R 12 G/S Sumo: the boxer goes supermoto. What changes, how much it costs, and whether it’s legal in Italy BMW

BMW R 12 G/S Sumo: the boxer goes supermoto. What changes, how much it costs, and whether it’s legal in Italy

Leggi l'articolo →