1model

compatible motorcycle

2015–2018

Production years covered

2mm

Allen key included

Operation

Type

Friction accelerator lock

Mechanical cruise control: it maintains throttle opening, not speed

Command

Knurled ring on the counterweight

It tightens and loosens between the little finger and palm, without letting go of the knob

Collar thread

Left-handed

The adjustment screw calibrates its resistance with the 2 mm key

Assembly

Position

Right handlebar end

Replaces the original counterweight

Handlebar setup

Original handlebar with an 18.7 mm inner diameter

See the compatibility table

Kit and maintenance

In the kit

3 items

Kaoko counterweight with friction ring, thrust washer, 2 mm Allen key

Maintenance

Once a year

Disassemble, clean the threads with mild soap, and lubricate them with petroleum jelly

Manufacturer code

INDTB100

Endurrad KA-INDTB100 code

Dati dal foglio istruzioni Kaoko e dalla tabella di compatibilità del produttore.

Cruise control meccanico per Indian Scout 2015–2018, nero a siluro

Everything you need to know before ordering

Technical specifications, equipment, delivery and warranty: below, every detail verified against the official Kaoko documentation.

Description Cruise control for Indian Scout 2015–2018, black torpedo

The throttle stays where you leave it, and your right hand can rest. This black torpedo-style mechanical cruise control for the 2015–2018 Indian Scout replaces the right handlebar end weight: as you open the throttle, tighten the ring with your little finger and the grip maintains the selected opening. No electronics, no wiring, and no modifications to the motorcycle.

Which motorcycles it fits

Motorcycle Years Handlebar setup
Indian Scout 2015–2018 Original handlebar with a 18.7 mm internal diameter

Only with the original handlebar with a 18.7 mm internal diameter. The grip must be opened at the end to allow the Kaoko to pass through. Different setup from those listed? Tell us the model and year before ordering.

How it works

The knurled ring screws onto the end weight and slows the rotation of the throttle grip. When tightened, it holds the throttle at the selected opening; when loosened, the grip moves freely again and closes by itself. This locks the throttle opening; it is not a speed regulator: the motorcycle slows down uphill, accelerates downhill, and does not disengage automatically when you brake. You can always open and close the throttle by hand, even when the device is engaged.

What you receive and how to install it

The package includes: Kaoko end weight with friction ring, thrust washer, and 2 mm Allen key. Remove the original right end weight, install the Kaoko one, and adjust the ring resistance with the 2 mm key. The manufacturer's instructions can be downloaded from the product page.

All models are available in the Kaoko cruise control range.

Why choose it
  • Mano destra a riposo: nei trasferimenti a velocità costante polso e avambraccio non devono più tenere aperto il gas.
  • Gas più stabile in fuoristrada: sullo sterrato sconnesso riduce le aperture involontarie dovute ai colpi.
  • Zero elettronica: niente cavi né centraline, prende il posto del contrappeso originale.
  • Si comanda senza lasciare la manopola: la ghiera si stringe e si allenta tra mignolo e palmo.
Who is it recommended for
  • A chi macina lunghi tratti di autostrada e statale.
  • A chi fa mototurismo e vuole il gas più stabile sugli sterrati sconnessi.
  • A chi a fine giornata sente la mano destra affaticata o intorpidita.

Il produttore lo destina a motociclisti esperti, da usare solo quando la strada lo consente.

Complete technical specification sheet
Technical data
  • Tipo: blocco acceleratore meccanico a frizione (cruise control meccanico)
  • Codice produttore: INDTB100
  • Montaggio: al posto del contrappeso destro del manubrio
  • Allestimento: manubrio originale da 18,7 mm di diametro interno
  • Nel kit: contrappeso Kaoko con ghiera di frizione, rondella reggispinta, chiave a brugola da 2 mm
  • Filettatura della ghiera: sinistrorsa, con grano di regolazione
  • Manutenzione: una volta l'anno, pulizia dei filetti con sapone neutro e vaselina
Documents and manufacturer

Istruzioni di montaggio: foglio Kaoko in inglese con le fasi di montaggio, l'uso e la manutenzione, scaricabile qui sotto.

Produttore: Kaoko, specialista dei blocchi acceleratore per moto. Design registrati in Sudafrica e brevetti USA D593,462 S, D593,463 S e D593,464 S.

Avvertenza del produttore: da disinserito la manopola del gas deve aprirsi e richiudersi liberamente. Controllalo sempre dopo il montaggio e dopo ogni regolazione.

How does it work in detail

  • Tighten the ring with your pinky and the throttle stays where you left it: your right hand rests, with no electronics and no modifications to the motorcycle.
What’s included in the package?

What’s included in the package?

The package includes: Kaoko counterweight with friction ring, thrust washer, 2 mm Allen key.

FAQs

For more information, see our FAQ of frequently asked questions.

Is it cruise control like the electronic kind in cars?

No. It is a mechanical throttle lock: it maintains the throttle opening you selected, not the speed. The motorcycle slows down uphill, accelerates downhill, and it does not disengage automatically when you brake or pull in the clutch. It is intended for highway and main-road stretches at a constant speed, when road conditions allow it.

How do you turn it on and off?

As you open the throttle, squeeze the ring between your little finger and palm: the ring screws in and creates the friction that holds the grip in position. To disengage it, make the same gesture while closing the throttle. When disengaged, the grip should open and close freely on its own, as if the device were not installed.

Can I still turn off the gas with the device inserted?

Yes. The ring slows the rotation of the throttle but does not lock it: you can always open and close the throttle by hand; the grip simply feels a little stiffer. The manufacturer recommends using it only when road conditions permit and keeping it disengaged in all other situations.

Do I need to modify the motorcycle to install it?

No. The Kaoko cruise control replaces the right handlebar bar-end weight: no drilling and no wiring. You rarely need to move the throttle housing a few millimeters along the handlebar by loosening its screws and tightening them again to the torque specified by the manufacturer. All the steps are in the instructions downloadable from the product page.

Which handlebar setup is it mounted with?

According to the manufacturer: original handlebar with an inner diameter of 18.7 mm. Only compatible with the original handlebar with an inner diameter of 18.7 mm. The grip must be opened at the end to allow the Kaoko to pass through. If your motorcycle has different handlebar accessories, contact us before ordering.

Didn’t find the answer you were looking for?

Don't hesitate to contact us

Buying guides, technical comparisons, and news about accessories for adventure motorcycles

Before choosing

View all

KTM 450 EXC-F 6Days 2026: technical specifications, price, and its connection to the ISDE

The special edition celebrating the ISDE: engine, electronics, chassis, official price in Italy, and the calendar for the 100th edition of the International Six Days Enduro 2026 in Portugal.

Read moreabout KTM 450 EXC-F 6Days 2026: technical specifications, price, and its connection to the ISDE

Modulo CGRC CAN per AIO-5 Play BMW con connettore a pin per il collegamento al Wonder Wheel

CGRC CAN for BMW: how to choose between 4-pin and 8-pin for the Wonder Wheel

The CGRC CAN connects the Chigee AIO-5 Play display to your BMW's Wonder Wheel. It is available in a 4-pin version (GS/GSA) and an 8-pin version (C/F/S/R/K): the R 1300 GS requires a different connector, which is not yet in the catalog.

Read moreabout CGRC CAN for BMW: how to choose between 4-pin and 8-pin for the Wonder Wheel

Piastra top case LOBOO JPT131WA montata sul portapacchi originale della BMW R 1300 GS

Motorcycle top case plate: which one to choose to mount the top case on your motorcycle

In brief. An aluminum top case does not attach directly to the motorcycle: it requires a top case plate, the interface connecting the luggage rack (standard or added) to the bottom of the top case. On Endurrad, you can find...

Read moreabout Motorcycle top case plate: which one to choose to mount the top case on your motorcycle