• Garagela tua moto e solo gli accessori compatibili
  • −5%Benvenuto nel Garage5% for anyone who saves the motorcycle in the app, until 06/30/2027
  • Cerca con una fotol'app riconosce la tua moto
  • Diario mototagliando, revisione, bollo
  • Avvisaminotifica quando un prodotto torna disponibile
  • −5%Primo ordinefatto dall'app
  • Vedi in 3De sulla tua moto, in realtà aumentata
Scarica su App Store Disponibile su Google Play Download

Free shipping on orders over €100 · 14-day returns

Centralina CANsmart GEN II DENALI per BMW R 1250 GS e R 1200 LCCentralina CANsmart DENALI per BMW R 1250 GS, vista dei connettoriCentralina CANsmart DENALI per BMW R 1250 GS, dettaglio del cablaggioCentralina CANsmart per BMW DENALI - Sicurezza Professionale
4 accessories Available circuits
10 To continue Circuit current
30 A Total current
GEN II updatable Generation

Panoramica

In breve

Quattro accessori comandati dai pulsanti originali della BMW

Quattro circuiti da 10 A continui, 30 A totali.

Comando dalla Wonder Wheel: nessun interruttore aggiunto.

Installazione sui connettori originali, senza tagliare cavi.

Fusibile elettronico per circuito e decine di regolazioni dal software.

Dal produttore DENALI

DENALI Electronics progetta illuminazione e sicurezza attiva per moto: faretti LED, clacson SoundBomb, indicatori e luci freno ausiliarie, e le centraline CANsmart che li integrano con l'elettronica della moto.

Codice Endurrad DNLWHS11602 — codice DENALI DNL.WHS.11602. Il software CANsmart Accessory Manager è scaricabile gratuitamente dal sito del produttore.

Leggi la descrizione completa

Code DNLWHS11602 — DENALI code DNL.WHS.11602

The control unit that uses your BMW CANbus to control up to four accessories from the Wonder Wheel, without adding handlebar switches or loose relays under the seat. It plugs into the original connectors: nothing needs to be cut or drilled.

Four circuits rated at 10 A continuous each, 30 A total, preconfigured for two sets of DENALI auxiliary lights, a SoundBomb horn, and the B6 brake light — but each can be reconfigured for any accessory within that limit. The CANsmart Accessory Manager software unlocks dozens of settings: flashing with the high beams, strobing with the horn, automatic shutoff with the turn signals, an electronic fuse for each circuit, and five-level heated clothing control.

Compatible motorcycles: R 1200 GS LC 2013-2018, R 1200 GS LC Adventure 2014-2018, R 1200 R and RS 2015-2018, R 1200 RT 2014-2018, R 1250 GS 2019-2023, R 1250 GS Adventure 2019-2024, R 1250 RT 2019-2024, R 1250 R and RS 2020-2024.

For the R 1300 GS, use code DNLWHS25900; for the K 1600, S 1000 XR, F 900 XR, F 850 GS, and F 750 GS, use DNLWHS11702.

Nella confezione

  • La centralina CANsmart GEN II con il cablaggio plug and play per R 1200 LC e R 1250.
  • Cavo di programmazione micro USB per collegarla al computer.
  • Fascette di fissaggio per il montaggio sotto la sella.
  • Faretti, clacson e luce freno non compresi la centralina li comanda, non li contiene.

DNLWHS11602 · 4 10 A circuits · control from the Wonder Wheel · GEN II

How does it work, in detail?

It connects to the motorcycle’s CAN bus and brings four accessories under the original controls.

Four accessories controlled by the Wonder Wheel
01

Four accessories controlled by the Wonder Wheel

The control unit connects to the motorcycle’s CAN bus and provides four circuits for accessories. From then on, auxiliary lights, the horn, and the brake light can be switched on, switched off, and adjusted using the BMW Wonder Wheel, with no additional switches on the handlebar and no loose relays under the seat.

Plug-and-play installation, with no wire cutting
02

Plug-and-play installation, with no wire cutting

It plugs into the motorcycle’s original connectors: nothing needs to be cut or drilled, and no relays need to be added. The control unit comes preconfigured for two sets of DENALI lights, a SoundBomb horn, and the B6 brake light, so in most cases it’s simply a matter of installing it and using it.

Dozens of software settings
03

Dozens of software settings

By connecting the control unit to the computer with the included micro USB cable, the CANsmart Accessory Manager software opens up dozens of settings: flashing with the high beams, strobing with the horn, automatic shutoff with the turn signals, an electronic fuse for each circuit, five-level heated clothing control, and activation only when the engine is running.

Scheda tecnica

Specifiche tecniche

Tutti i dati

Features

Accessory circuits
4, each reconfigurable Preconfigured for two sets of DENALI lights, a SoundBomb horn, and a B6 brake light
Command
Wonder Wheel BMW or the CANsmart Accessory Manager
Heated clothing
5 adjustment levels Declared value for R 1250 GS

Electric

Circuit current
10 To continue 30 A total for the control unit
Installation
Plug and play on the original connectors No wire cutting, no additional relay

Compatibility

Covered motorcycles
BMW R 1200 LC and R 1250 R 1200 GS LC 13-18, GS LC Adv 14-18, R and RS 15-18, RT 14-18; R 1250 GS 19-23, GS Adv 19-24, RT 19-24, R and RS 20-24

Equipment

Package contents
CANsmart control unit, cable ties, micro USB programming cable
Manufacturer’s warranty
5 years In addition to the 24-month statutory conformity warranty

Dati dichiarati da DENALI sulla scheda ufficiale del CANsmart GEN II.

Prima di ordinare

Montaggio e requisiti

Come si monta

Istruzioni complete e note di sicurezza

Contenuto della confezione. Centralina CANsmart, una prolunga clacson a 3 poli da 1,5 m, due prolunghe per luci LED a 3 poli da 1,5 m, un adattatore di cablaggio per la luce freno, quattro fascette, un velcro adesivo Dual Lock e il cavo USB / micro USB per la programmazione.

Dove si collega al CAN bus. La centralina si innesta in linea sul connettore RDC del controllo pressione pneumatici, nel vano dietro la sella del passeggero: per accedervi si tolgono sella e pannelli della zona. Se la moto ha il sensore RDC, si stacca il connettore dalla centralina RDC, lo si innesta nel connettore maschio a 4 poli del CANsmart e si collega la femmina a 4 poli del CANsmart alla centralina RDC. Se la moto non ha l'RDC, si toglie il tappo dal connettore, lo si innesta nel maschio a 4 poli e si usa quello stesso tappo per chiudere la femmina rimasta libera.

I quattro circuiti. Nella configurazione di fabbrica il filo rosso più lungo è il set luci uno e il filo bianco più corto è il set luci due: ciascun circuito regge fino a 10 A. Il circuito blu a 2 poli è il clacson, il giallo a 2 poli è la luce freno ausiliaria. Con il Circuit Function Selector del software ogni circuito può essere riassegnato a un'altra funzione: frecce ausiliarie, run / brake / turn, abbigliamento riscaldato o presa accessoria sotto chiave.

Collegamento alla batteria. Si toglie prima il fusibile dal portafusibile, si scollegano i morsetti negativo e positivo, si collegano i terminali ad anello alla batteria — il filo arancione con il portafusibile va al positivo — e infine si rimette il fusibile. Conviene fissare il portafusibile in un punto raggiungibile senza smontare nulla.

Faretti a coppie o divisi sinistra / destra. Collegando i faretti a coppie, la funzione «spegni quando la freccia è attiva» spegne entrambi i lati. Dividendo invece i faretti per lato su due circuiti e riassegnandoli nel software come «Left Light 1» e «Right Light 1», si spegne solo il faretto del lato in cui la freccia è accesa.

Faretti a due fili. Per i faretti privi del terzo filo di dimmerazione va disattivata la modalità «Three-Wire Dimming Mode»: il segnale PWM passa allora sul filo rosso, che si usa come positivo, con il nero a negativo.

Comandi dalla moto. Set luci uno: si accende e si spegne tenendo premuto per 3 secondi il pulsante di annullamento frecce; per regolare l'intensità si tiene la Wonder Wheel a sinistra per 3 secondi e si scorre su e giù fra 0 e 100%, uscendo con 1 secondo a sinistra o dopo 5 secondi di inattività. Set luci due: tre pressioni rapide dello stesso pulsante, e Wonder Wheel a destra per la regolazione. Il clacson ausiliario suona con il pulsante originale della moto, la luce freno si attiva con il freno anteriore o posteriore.

Programmazione e spia di stato. Si toglie il tappo dalla porta micro USB in testa alla centralina, si collega il cavo fornito al computer e si porta il quadro su ON con il CANsmart Accessory Manager aperto, disponibile per Windows e macOS. Verde fisso a quadro acceso e verde a lampeggio lento a quadro spento indicano funzionamento regolare; rosso lampeggiante segnala l'intervento del fusibile elettronico di almeno un canale, da reimpostare controllando o alzando le soglie e ciclando il quadro.

Coppie di serraggio e passaggio dei cavi. DENALI consiglia frenafiletti a media resistenza su tutta la viteria e indica 1,0 Nm per M3, 2,5 Nm per M4, 5,0 Nm per M5, 9,0 Nm per M6, 18,0 Nm per M8, 41,0 Nm per M10 e 71,0 Nm per M12, con un controllo del serraggio dopo i primi 50 km. Prima di richiudere, gira il manubrio a fondo corsa da entrambi i lati e comprimi le sospensioni per verificare che i cavi abbiano gioco e non vadano in tiro.

Dati presi dal manuale ufficiale DENALI DNL.WHS.11602 rev02.

La centralina non modifica l'impianto originale della moto: si innesta sui connettori di serie e può essere rimossa riportando la moto allo stato di fabbrica. Ogni circuito ha un fusibile elettronico impostabile dal software.

Gli accessori collegati restano soggetti alle regole del codice della strada che li riguardano: i fari supplementari vanno montati in numero pari e simmetrici, il clacson deve rispettare i limiti previsti.

DENALI riconosce 5 anni di garanzia convenzionale del produttore, che si aggiunge ai 24 mesi di garanzia legale di conformità.

A chi sta allestendo una R 1250 GS o una R 1200 LC con più di un accessorio elettrico. Se metti solo un paio di faretti e basta, un cablaggio con interruttore costa molto meno; se invece prevedi faretti, clacson, luce freno e magari manopole riscaldate, il CANsmart si ripaga in tempo di installazione e in ordine sotto la sella.

Se la tua moto non è in elenco: R 1300 GS usa il DNLWHS25900, la famiglia K 1600, S 1000 XR, F 850 e F 750 GS usa il DNLWHS11702. Su moto senza CANsmart dedicato, il controller universale DialDim fa un lavoro simile senza leggere il CANbus.

Avvisami quando disponibile

Ti scriviamo appena CANsmart GEN II motorcycle accessory controller for BMW R 1250 GS and R 1200 torna disponibile.

Frequently asked questions

For more information, see our FAQ of frequently asked questions.

Is it compatible with my BMW?

This control unit fits the R 1200 GS LC 2013–2018, R 1200 GS LC Adventure 2014–2018, R 1200 R and RS 2015–2018, R 1200 RT 2014–2018, R 1250 GS 2019–2023, R 1250 GS Adventure 2019–2024, R 1250 RT 2019–2024, and R 1250 R and RS 2020–2024. For the R 1300 GS, code DNLWHS25900 is required; for the K 1600, S 1000 XR, F 850, and F 750 GS, use DNLWHS11702.

What’s the difference between GEN I and GEN II?

This is the GEN II, with more available current and more settings. DENALI stopped developing new features for GEN I devices in February 2024: if you find a cheaper GEN I controller out there, be aware that it no longer receives updates.

Do you need to know how to work on the electrical system?

No. The control unit plugs into the motorcycle’s original connectors: nothing needs to be cut or drilled. The part requiring the most attention is reaching the connection point, which is located differently on each model: the official DENALI manual shows it step by step.

Can I connect non-DENALI accessories to it?

Yes. The four circuits come preconfigured for DENALI accessories, but each can be reconfigured through the software and supports 10 A continuously: you can connect a USB socket, GPS, dashcam, heated grips, or any other accessory within that limit.

Didn't find the answer you were looking for?

Do not hesitate to contact us