• Garagela tua moto e solo gli accessori compatibili
  • −5%Benvenuto nel Garage5% off for those who save the motorcycle in the app, until 12/31/2026
  • Cerca con una fotol'app riconosce la tua moto
  • Diario mototagliando, revisione, bollo
  • Avvisaminotifica quando un prodotto torna disponibile
  • −5%Primo ordinefatto dall'app
  • Vedi in 3De sulla tua moto, in realtà aumentata
Scarica su App Store Disponibile su Google Play Download

Free shipping on orders over €100 · 14-day returns

Cablaggio luce freno plug and play DENALI DNLWHS24000 per Ducati DesertXCablaggio luce freno DENALI DNLWHS24000 per Ducati DesertX, vista dei connettoriCablaggio luce freno DENALI DNLWHS24000 per Ducati DesertX, dettaglio del cablaggio

Panoramica

In breve

Preleva il segnale stop senza tagliare un cavo

Sulla DesertX l'elettronica è fitta e derivare a mano sul circuito stop è il modo più rapido per crearsi problemi. Questo adattatore si innesta in linea sul connettore originale e preleva il segnale per una luce freno ausiliaria o per il circuito stop di una centralina, senza tagli e in modo reversibile.

Dal produttore DENALI

DENALI Electronics progetta illuminazione e sicurezza attiva per moto: faretti LED, clacson SoundBomb, indicatori e luci freno ausiliarie, e le centraline CANsmart che li integrano con l'elettronica della moto.

Codice Endurrad DNLWHS24000 — codice DENALI DNL.WHS.24000.

Leggi la descrizione completa

Code DNLWHS24000 — DENALI code DNL.WHS.24000

Dedicated wiring harness for the Ducati DesertX that picks up the brake-light signal from the motorcycle’s original connector to power an auxiliary brake light or the brake-light circuit of a control unit.

It plugs inline with the factory connector: no cutting, stripping, or tapping into any wires. On a motorcycle with electronics as densely packed as the DesertX, it makes the difference between a clean installation and a makeshift tap.

Nella confezione

  • Il cablaggio specifico per la Ducati DesertX, che preleva il segnale stop dal connettore originale della moto.
  • Luce freno non compresa serve ad alimentare una luce freno ausiliaria o il circuito stop di una centralina.
  • Innesto in linea non si taglia, non si spella e non si deriva nessun cavo: il montaggio e reversibile.

DNLWHS24000 · specific to Ducati DesertX · no modifications

How does it work, in detail?

Take the brake light signal from the motorcycle’s original connector.

The stop signal without touching the cables
01

The stop signal without touching the cables

To power an auxiliary brake light, you need the brake signal. The alternative to this adapter is to strip the original wire and splice into it: an exposed connection that will eventually cause problems with water and salt. This connects inline with the DesertX connector.

It works with the B6 brake light
02

It works with the B6 brake light

It is the wiring that carries the stop signal to a B6 pod or to the stop circuit of a control unit. If you are setting up the rear visibility of the DesertX, the catalog also includes B6 kits that already come complete with this adapter.

Scheda tecnica

Specifiche tecniche

Tutti i dati

Features

What does it do
Take the stop signal from the original connector In-line connection, without cutting or tapping wires, completely reversible

Compatibility

Covered motorcycles
Ducati DesertX

Equipment

Manufacturer’s warranty
5 years In addition to the 24-month statutory conformity warranty

Dati dichiarati da DENALI sulla scheda ufficiale.

Prima di ordinare

Montaggio e requisiti

Come si monta

Istruzioni complete e note di sicurezza

A cosa serve. Collega la luce freno ausiliaria B6 al cablaggio originale della Ducati DesertX senza derivare nulla. Nel montaggio universale si lavora invece sui tre fili del fanale posteriore, riconoscendoli con il tester e collegandoli con i Posi-Tap.

Come si collega. Si stacca il connettore originale del fanale, si inserisce il cablaggio in linea e si ricollega, poi si innesta il pigtail nel modulo B6. Nessun filo tagliato: il montaggio resta reversibile.

Se hai una centralina CANsmart, non serve. Con il CANsmart la luce freno va sul circuito giallo dedicato, ed è così che diventa intelligente: posizione, sequenze di lampeggio e attivazione in decelerazione prima ancora di toccare il freno.

Prima di richiudere. Verifica che i cavi abbiano gioco con il codone rimontato e a sospensioni compresse.

Domande frequenti

Le domande che ci fate più spesso

What exactly is it used for?

It picks up the brake-light signal from the motorcycle’s original connector to power an auxiliary brake light or the brake-light circuit of a control unit. It plugs in-line with the stock connector: no cutting, stripping, or tapping of any wires is required, and it can be removed at any time, returning the motorcycle to its original condition.

Do I need it if I already have a CANsmart controller?

The control unit has its own wiring for the brake light, but on many motorcycles you still need the specific adapter to connect to the stock connector without modifications. It depends on the model: tell us the motorcycle and year, and we’ll let you know if you need it.

Avvisami quando disponibile

Ti scriviamo appena Plug-and-play brake light wiring harness for Ducati DesertX torna disponibile.