JP031W

Code

F 750 and F 850 GS

Motorcycle

P45T

Code

Single plate

Content

Identification

Product code

JP031W

Official name Top Case Rack

Served top case series

PIKE TRACKER, TIBET and CONQUEROR

As stated in the user manual

Compatibility

BMW F 750 GS

Since 2017

Year stated in the manual

BMW F 850 GS

Since 2021

Previous vintages are not specified in the manual

Not compatible

Adventure Versions

F 850 GS ADV and F 900 GS ADV require code JP032W

Assembly

Mounting points

Original rear subframe mounting points

No drilling and no original parts to remove

Structure

Two elements, upper plate and lower bracket

Tightening torque

12 N.m on all M6 screws

To be administered in sequence after completing the adjustments

Maximum load

The one specified by BMW for the rear subframe

The limit includes the plate, top case, and contents. LOBOO does not specify its own value.

Equipment

Package contents

9 items: 2 plate components, 6 spacers, 12 M6 screws, 8 washers, 2 nuts, 1 wrench

Top case not included

Spacers

6 bushings, 9 mm, 20 mm outer diameter, and 6.5 mm bore

Tool included

Assembly key included

Materials

Material

Not stated by the manufacturer

The manual and price list do not specify the material of the plate.

Weight

Not stated by the manufacturer

Dati dal manuale d'uso LOBOO JP031W. Materiale e peso non sono dichiarati da nessuna fonte.

The steel support for the top case on BMW F 750 GS, F 850 GS, and F 800 GS.

All you need to know before ordering

Technical specifications, equipment, delivery, and warranty: find every detail, verified against official LOBOO documentation, below.

Description Top case plate for BMW F 750 GS from 2017 and F 850 GS from 2021

It is the base that allows you to mount a top case on the rear subframe of the F 750 GS and F 850 GS. It attaches to the original mounting points: no drilling, no adapter bracket, and no motorcycle parts need to be removed.

Check the year before ordering

The manual states BMW F 750 GS from 2017 and BMW F 850 GS from 2021. For F 850 GS models registered before 2021, the manufacturer does not state compatibility: if you have one of these, contact us with the year and VIN before ordering.

For the Adventure versions, F 850 GS ADV and F 900 GS ADV, you need the JP032W plate, which has its own page: the rear subframe has different mounting points.

How to install it

The plate consists of two parts, an upper section and a lower bracket, and the package contains everything needed: six spacers, twelve M6 screws in three lengths, eight washers, two nuts, and the assembly wrench.

The manufacturer instructs you to not fully tighten during assembly: first complete all adjustments, then tighten in sequence to 12 N·m on all M6 screws. The manual is available in eight languages, including Italian.

Which top cases can you mount on it

The manual lists the PIKE TRACKER, TIBET and CONQUEROR series for this plate. The top case is not included: this page concerns the plate only. LOBOO aluminum top cases can only be mounted on LOBOO plates and luggage racks, not on supports from other brands.

The rear load has a limit

LOBOO does not state a specific maximum load for the plate: the limit specified by BMW in the owner's manual for the rear subframe applies, and includes the plate, top case, and contents. Recheck the fasteners after the first 100–200 km and make sure the top case does not obstruct the license plate or rear lights.

The plate material is not specified in any LOBOO source, including the manual.

Why choose it
  • Plug-and-play assembly:attaches to the original rear subframe points, without drilling or adapter brackets.
  • Steel construction:transfers the top case's weight to the motorcycle's frame even with a loaded case and uneven terrain.
  • Dedicated geometry:calibrated for F 750 GS, F 850 GS, and F 800 GS from 2025.
  • Pre-drilled for PIKE TRACKER P45T:available in black or silver finish.
Who is it recommended for

You need this plate if you have an F 750 GS, F 850 GS or F 800 GS from 2025 and want to mount a LOBOO top case.

Please note the version:For the F 850 GS ADV and F 900 GS ADV, the JP032W plate is needed, on a separate page. The Adventure's rear frame has different mounting points.

The top case is not included: the plate is the base, the top case must be purchased separately.

Documents and manufacturer

Installation and Notes

  • Mounts on the OEM points of the rear subframe, without drilling or permanent modifications.
  • Respects the maximum load on the rear subframe indicated by BMW in the motorcycle's manual: the limit applies to the plate and top case loaded together.
  • Recheck tightening after the first 100-200 km.
  • Verify make, model, year, and version before purchase.

How does it work, in detail?

The base that supports the top case, not a secondary accessory

The base that supports the top case, not a secondary accessory

The plate transfers the top case’s weight to the original mounting points on the rear subframe. It is the component that determines whether the top box remains stable when the motorcycle is loaded, on rough surfaces, and at high speeds.

It mounts to the original points without drilling or removing anything from the motorcycle. The material is not specified by any LOBOO source: we prefer to say so rather than choose it ourselves.

F 750 from 2017, F 850 from 2021: check the year

F 750 from 2017, F 850 from 2021: check the year

This is the JP031W, and the manual states that it is intended for the F 750 GS from 2017 onward and the F 850 GS from 2021 onward. For F 850 GS motorcycles registered before 2021, the manufacturer does not state that it is compatible: if you have one of those, send us the year and VIN before ordering.

If you have an Adventure you need the JP032W instead: the rear subframe has a different geometry, and the two plates are not interchangeable. This is the most common ordering mistake for this family of motorcycles, and it will cost you a return shipping fee.

If in doubt, send us the model, year, and trim level before buying: we also reply on WhatsApp.

What do you mount on it: compatible top cases

What do you mount on it: compatible top cases

The plate is the interface between the motorcycle and the top case: on its own, it is of no use, but without it, no LOBOO top case can be attached. The 45-liter PIKE TRACKER P45T fits onto this plate, available in matte black or glossy silver.

The top case is purchased separately, leaving you free to choose later: install the plate today and decide on the capacity once you know how much luggage you really carry.

The weight above the tail is the one you feel the most.

The weight above the tail is the one you feel the most.

A loaded top case sits much higher and farther back than the side cases. Every kilogram up there lightens the front end and amplifies the rear’s movements: that’s why a motorcycle loaded evenly on the sides remains neutral, while ten kilograms in the top case makes it nervous on the highway.

This isn’t an argument against using a top case, but for loading it properly: put lightweight, bulky items inside, such as a spare helmet, rain gear, and spare parts. Keep the tools and the real weight low down in the side cases.

Always respect the maximum load BMW specifies for the rear subframe: this includes the mounting plate, top case, and contents.

FAQs

For more information, please see our FAQ.

Which LOBOO top cases can I mount on this plate?

The manual lists the plate for the PIKE TRACKER, TIBET, and CONQUEROR series, each available in black or silver. The top case is not included and must be purchased separately.

LOBOO aluminum top cases can only be mounted on LOBOO plates and luggage racks; they are not compatible with supports from other brands.

Does it also fit the Adventure versions of the F 850 or F 900?

No. The manual lists this plate for the F 750 GS from 2017 and the F 850 GS from 2021. Adventure versions require the JP032W, designed for the F 850 GS Adventure from 2019 and the F 900 GS Adventure from 2025: the luggage rack has different mounting points, and the two plates are not interchangeable.

If you have an F 850 GS registered before 2021, the manufacturer does not declare compatibility: write to us with the year and frame number before ordering.

Is the product covered by a warranty?

Yes: all LOBOO products sold on Endurrad are covered by the 24-month statutory consumer warranty. In the event of a lack of conformity, we will handle the claim with the manufacturer.

Can I return the product if it isn’t suitable?

Yes, you are entitled to return the item within 14 days of delivery under online purchase regulations. The product must be intact and in its original packaging: contact us and we’ll guide you through the process.

How does shipping work?

Tracked shipping throughout Italy: the product is carefully inspected and prepared before leaving our warehouse. The mounting accessories included in the original package are included.

Can I pay in installments?

Yes: at checkout, installment payment services are available directly among the payment methods, with no additional paperwork.

Is it an original LOBOO product?

Yes: we sell exclusively original LOBOO products, new and in the packaging provided by the manufacturer, with official documentation.

Didn't find the answer you were looking for?

Do not hesitate to contact us

Buying guides, technical comparisons, and news on adventure motorcycle accessories

Before choosing

View all

Piastra top case LOBOO JPT131WA montata sul portapacchi originale della BMW R 1300 GS

Motorcycle top case plate: which one to choose to mount the top case on your motorcycle

In brief. An aluminum top case does not attach directly to the motorcycle: it requires a top case plate, the interface connecting the luggage rack (standard or added) to the bottom of the top case. On Endurrad, you can find...

Read moreabout Motorcycle top case plate: which one to choose to mount the top case on your motorcycle

Honda XL750 Transalp 2026 in azione

Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

From 2026, the Honda XL750 Transalp comes with the E-Clutch as standard on both versions, full-power and A2, at the same price of €10,990. Official technical specifications, what really changes, and how to equip it for touring with Endurrad catalog accessories.

Read moreabout Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

Maxi enduro con numero di gara su una strada bianca dell'Appennino tra boschi autunnali durante il Transitalia Marathon

Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle

From September 25 to October 1, 2026, from Rimini to Termoli in four stages and over 1,000 km: dates, route, Complex, Plain and Road tracks, costs, permitted motorcycles, luggage rules, and a complete checklist for preparing the maxi enduro.

Read moreabout Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle