Kit cruise control Kaoko YAM500CRG per Yamaha FJR1300, YZF-R1, YZF-R6 e MT-09 con specchi CRG

Cruise control Kaoko YAM500CRG montato su Yamaha FJR1300

7 models Compatible Yamaha products

2001–2025 Production years covered

2 mm Allen key included

KAOKO ✓ Prodotto originale

Cruise control for Yamaha FJR1300, YZF-R1, YZF-R6 and MT-09 with CRG mirrors

€117,95

Paga in 3 rate da €39,31 senza interessi

Va bene per la tua moto?

Progettato per: FJR1300, FJR1300 AS, YZF-R6, YZF-R1, MT-09, MT-09 SP, YZF-R9.

Disponibile, pronto per la spedizione🚚 Consegna in 5 giorni lavorativi

Spedizione gratuitaoltre 100 € in Italia

Reso entro 14 giornidalla consegna

Garanzia 24 mesigaranzia legale

Pagamento sicurocarte, PayPal e Klarna

Dubbi sulla compatibilità? Scrivici, ti rispondiamo noi. WhatsApp

Panoramica

In breve

Cruise control meccanico per Yamaha FJR1300, YZF-R1, YZF-R6 e MT-09 con specchi CRG

Mano destra a riposo

nei trasferimenti a velocità costante polso e avambraccio non devono più tenere aperto il gas.

Gas più stabile in fuoristrada

sullo sterrato sconnesso riduce le aperture involontarie dovute ai colpi.

Zero elettronica

niente cavi né centraline, prende il posto del contrappeso originale.

Si comanda senza lasciare la manopola

la ghiera si stringe e si allenta tra mignolo e palmo.

Leggi la descrizione completa

The throttle stays where you leave it, so your right hand can rest. This mechanical cruise control for the Yamaha FJR1300, YZF-R1, YZF-R6 and MT-09 with CRG mirrors replaces the right handlebar end weight: as you open the throttle, tighten the ring with your little finger and the grip maintains the selected opening. No electronics, no wiring, and no modifications to the motorcycle.

Which Yamaha models it fits

Motorcycle	Years	Handlebar setup
Yamaha FJR1300	2001–2018	CRG bar-end mirrors
Yamaha FJR1300 AS	2003–2018	CRG bar-end mirrors
Yamaha YZF-R6	2003–2017	CRG bar-end mirrors
Yamaha YZF-R1	2004–2016	CRG bar-end mirrors
Yamaha MT-09	2021–2023	CRG bar-end mirrors
Yamaha MT-09 SP	2021–2023	CRG bar-end mirrors
Yamaha YZF-R9	2025	CRG bar-end mirrors

Only for motorcycles with CRG bar-end mirrors. The shape of the CRG mirror may differ from the one shown in the photo: installation remains the same. Have a different setup from those listed? Tell us the model and year before ordering.

How it works

The knurled ring screws onto the bar-end weight and slows the rotation of the throttle grip. When tightened, it holds the throttle at the selected opening; when loosened, the grip moves freely again and closes by itself. It locks the throttle opening; it is not a speed regulator: the motorcycle slows uphill, accelerates downhill, and does not disengage automatically when you brake. You can always open and close the throttle by hand, even when the device is engaged.

What you receive and how to install it

The package includes: Kaoko bar-end weight with friction ring, 025 thrust washer, 100 thrust washer, M6 × 45 mm screw, and a 2 mm Allen key. Remove the original right bar-end weight, install the Kaoko one, and adjust the ring resistance with the 2 mm key. The manufacturer's instructions can be downloaded from the product page.

All models are available in the Kaoko cruise control range.

Nella confezione

Contrappeso Kaoko con ghiera di frizione.
Rondella reggispinta 025.
Rondella reggispinta 100.
Vite M6 × 45 mm.
Chiave a brugola da 2 mm.
Istruzioni di montaggio.

YAM500CRG · Adjustable clutch · In place of the right counterweight · 2 mm key included

How does it work in detail

Tighten the ring with your pinky and the throttle stays where you left it: your right hand rests, with no electronics and no modifications to the motorcycle.

What’s included in the package?

The package includes: Kaoko counterweight with friction ring, 025 thrust washer, 100 thrust washer, M6 × 45 mm screw, 2 mm Allen key, assembly instructions.

Mounted on the motorcycle

The Kaoko cruise control replaces the right bar-end weight; the ring remains beneath your little finger, within reach without releasing the grip.

Scheda tecnica

Specifiche tecniche

Tutti i dati

Operation

Type

Friction accelerator lock Mechanical cruise control: it maintains throttle opening, not speed

Command

Knurled ring on the counterweight It tightens and loosens between the little finger and palm, without letting go of the knob

Collar thread

Left-handed The adjustment screw calibrates its resistance with the 2 mm key

Assembly

Position

Right handlebar end Replaces the original counterweight

Handlebar setup

CRG bar-end mirrors See the compatibility table

Kit and maintenance

In the kit

6 items Kaoko counterweight with friction ring, 025 thrust washer, 100 thrust washer, M6 × 45 mm screw, 2 mm Allen key, assembly instructions

Maintenance

Once a year Disassemble, clean the threads with mild soap, and lubricate them with petroleum jelly

Manufacturer code

YAM500CRG Endurrad code KA-YAM500CRG

Dati dal foglio istruzioni Kaoko e dalla tabella di compatibilità del produttore.

Manuale d'usoDocumento originale KAOKO Scarica ↓

Prima di ordinare

Montaggio e requisiti

Come si monta

Istruzioni complete e note di sicurezza

Istruzioni di montaggio: foglio Kaoko in inglese con le fasi di montaggio, l'uso e la manutenzione, scaricabile qui sotto.

Produttore: Kaoko, specialista dei blocchi acceleratore per moto. Design registrati in Sudafrica e brevetti USA D593,462 S, D593,463 S e D593,464 S.

Avvertenza del produttore: da disinserito la manopola del gas deve aprirsi e richiudersi liberamente. Controllalo sempre dopo il montaggio e dopo ogni regolazione.

A chi macina lunghi tratti di autostrada e statale.
A chi fa mototurismo e vuole il gas più stabile sugli sterrati sconnessi.
A chi a fine giornata sente la mano destra affaticata o intorpidita.

Il produttore lo destina a motociclisti esperti, da usare solo quando la strada lo consente.

Compatibilità

Hai un dubbio sulla compatibilità?Mandaci una foto su WhatsApp: ti rispondiamo noi. Scrivici →

Domande frequenti

Le domande che ci fate più spesso

Is it cruise control like the electronic kind in cars?

No. It is a mechanical throttle lock: it maintains the throttle opening you selected, not the speed. The motorcycle slows down uphill, accelerates downhill, and it does not disengage automatically when you brake or pull in the clutch. It is intended for highway and main-road stretches at a constant speed, when road conditions allow it.

How do you turn it on and off?

As you open the throttle, squeeze the ring between your little finger and palm: the ring screws in and creates the friction that holds the grip in position. To disengage it, make the same gesture while closing the throttle. When disengaged, the grip should open and close freely on its own, as if the device were not installed.

Can I still turn off the gas with the device inserted?

Yes. The ring slows the rotation of the throttle but does not lock it: you can always open and close the throttle by hand; the grip simply feels a little stiffer. The manufacturer recommends using it only when road conditions permit and keeping it disengaged in all other situations.

Do I need to modify the motorcycle to install it?

No. The Kaoko cruise control replaces the right handlebar bar-end weight: no drilling and no wiring. You rarely need to move the throttle housing a few millimeters along the handlebar by loosening its screws and tightening them again to the torque specified by the manufacturer. All the steps are in the instructions downloadable from the product page.

Which handlebar setup is it mounted with?

According to the manufacturer: CRG bar-end mirrors. Only for motorcycles with CRG bar-end mirrors. The shape of the CRG mirror may differ from the one shown in the photo: the mounting remains the same. If your motorcycle has different handlebar accessories, contact us before ordering.

Dal blog

Prima di scegliere

Tutti gli articoli

KTM 690 Rally 2027: price in Italy, technical specifications, and who it’s really for

KTM 690 Rally15/10/2026