Steelpowder-coated

Material

M8standard DENALI

Mounting hole

Serial pointsno punctures

Assembly

Compatibility

Motorcycle

Yamaha Ténéré 700

Base 2019-2024, Rally 2020-2024, Extreme and Explore 2023-2024

Assembly

With upper engine guards

Possible conflict

Some engine guards that join at the front use the same mounting point: in that case, a clamp for bars from 21 to 29 mm.

Compatibility

Spotlights

The entire DENALI range

Construction

Material

Powder-coated steel

Assembly

Spotlight mount

Foro M8

Packaging

Content

Brackets and fasteners

Spotlights not included

Equipment

Manufacturer’s warranty

5

In addition to the 24-month statutory conformity warranty

Dati dichiarati da DENALI sulla scheda ufficiale europea del supporto LAH.06.10200.

Faretti nella posizione giusta, senza forare niente

Everything you need to know before ordering

Technical specifications, equipment, delivery, and warranty: below you’ll find every detail verified against the official DENALI documentation.

Description Auxiliary light mounts for Yamaha Ténéré 700 2019-2024

Code LAH0610200 — DENALI code LAH.06.10200

Specific mount that allows any DENALI light to be installed in the optimal position on the Yamaha Ténéré 700 from 2019 to 2024, including the 2020-2024 Rally and the 2023-2024 Extreme and Explore. Powder-coated steel brackets with an M8 mounting hole and all the necessary hardware.

It is compatible with the standard low fender and was also designed for aftermarket high-fender kits. Pay attention to upper engine guards: some models that join together at the front of the motorcycle use the same mounting point. In that case, DENALI recommends the articulated clamp for bars measuring 21 to 29 mm.

It is the same mount used in the DL4 and D7 PRO light kits for this motorcycle: if you upgrade your lights in the future, the mount will still fit.

Why choose it

Supporto per faretti disegnato sulla Yamaha Ténéré 700 dal 2019 al 2024, versioni Rally, Extreme ed Explore comprese: si fissa a punti di ancoraggio già presenti sulla moto, senza forare né adattare niente.

Who is it recommended for

A chi ha una Ténéré 700 e vuole comporre l'allestimento pezzo per pezzo invece di comprare un kit completo: questo è lo stesso attacco che si trova nei kit DL4 e D7 PRO.

Sulla scelta dei faretti, su questa moto conviene un fascio largo: in fuoristrada vedere il ciglio e le buche vicine vale più della distanza.

Complete technical specification sheet
Technical data
  • Materiale: acciaio verniciato a polvere
  • Foro di montaggio: M8, compatibile con tutti i faretti DENALI
  • Compatibilità: Yamaha Ténéré 700 dal 2019 al 2024
  • Montaggio: sui punti di fissaggio di serie, nessuna foratura
  • Nota: è l'attacco dei kit DL4 e D7 PRO per questa moto
Documents and manufacturer

DENALI riconosce 5 anni di garanzia convenzionale del produttore. Si aggiunge, e non sostituisce, i 24 mesi di garanzia legale di conformità previsti per legge.

Restano esclusi usura normale, abrasione, uso improprio, installazione errata, incidenti e modifiche. Tagliare o adattare le staffe rientra fra le modifiche e fa decadere la garanzia del produttore.

L'uso su strada pubblica dei fasci supplementari è regolato dal codice della strada del Paese in cui circoli: verifica sempre le prescrizioni locali.

How does it work, in detail?

  • Spotlights in the right position, without drilling anything.
It is the Ténéré kit mount

It is the Ténéré kit mount

It’s the same mount that DENALI uses in the DL4 and D7 PRO auxiliary light kits for the Ténéré 700. The M8 hole accepts any auxiliary light in the range, so you can start with an affordable pair and upgrade by changing only the lights.

Declared compatibility: Ténéré 700 2019-2024, Rally 2020-2024, Extreme and Explore 2023-2024, with the standard low fender or an aftermarket high fender.

A motorcycle that truly goes off-road

A motorcycle that truly goes off-road

On the Ténéré 700, dirt roads are not an exception: a wide beam is preferable, because off-road, seeing the edge and nearby potholes is more valuable than seeing two hundred meters ahead.

Given the intended use, check the tightness more often than the 50 km specified as the first interval, using medium-strength threadlocker on all fasteners.

No drilling, reversible installation

No drilling, reversible installation

The support mounts to the points already provided by the manufacturer, with the necessary hardware included. No drilling or modifications are required.

Powder-coated steel brackets, M8 mounting hole.

FAQs

For more information, see our FAQ of frequently asked questions.

Is it the same bracket as the spotlight kits?

Yes. It’s the mount used in the DL4 and D7 PRO kits for the Ténéré 700: if you already have the mount, you only need to purchase the lights and wiring harness.

What type of spotlight is best for this motorcycle?

The M8 mount accepts the entire range. On the Ténéré 700, which truly goes off-road, a wide beam works better than a narrow one: seeing the edge of the trail and nearby potholes matters more than distance.

Which model years of the Ténéré 700 does it fit?

DENALI lists it for the Ténéré 700 from 2019 to 2024, the Rally from 2020 to 2024, and the Extreme and Explore from 2023-2024. If you have upper crash bars that join at the front, check first: some use the same mounting point.

Didn’t find the answer you were looking for?

Don't hesitate to contact us

Buying guides, technical comparisons, and news about accessories for adventure motorcycles

Before choosing

View all

Suzuki V-Strom 800DE con valigie laterali e bauletto in alluminio LOBOO

Suzuki V-Strom 800DE: quali valigie e quale bauletto montare, con telai e prezzi reali

Sulla Suzuki V-Strom 800DE dal 2024 il bagaglio rigido LOBOO si compone con due supporti indipendenti, il telaio laterale JP421B e la piastra JP421W. Configurazioni, litri, prezzi, scorte reali e montaggio a confronto.

Read moreabout Suzuki V-Strom 800DE: quali valigie e quale bauletto montare, con telai e prezzi reali

Manubrio di moto adventure con entrambi i copri manopole LOBOO H80 installati

Heated motorcycle grip covers: Will they fit yours? Size, wiring, and installation of the LOBOO H80

A heated grip cover is not chosen by motorcycle model but by the grip diameter: the LOBOO H80 fits grips from 29 to 35 mm. How to measure, connect to a 12–15 V system, and install without removing the controls.

Read moreabout Heated motorcycle grip covers: Will they fit yours? Size, wiring, and installation of the LOBOO H80

BMW R 1250 GS Adventure con coppia di borse gonfiabili LOBOO Wanderer montate sulle barre paramotore

Accessories for enduro and maxi-enduro motorcycles: the best options, from panniers to inflatable crash bar bags

The accessories that really matter on an enduro or maxi-enduro motorcycle, in order of priority: rear panniers and frames, crash bars, crash bar bags, and inflatable bags explained in detail, with verified manufacturer data, prices, and availability.

Read moreabout Accessories for enduro and maxi-enduro motorcycles: the best options, from panniers to inflatable crash bar bags