1.740on the couple

Lumen

126 per pod

LED

2position and stop

Circuits

IP67

Protection

Equipment

Kit contents

Two B6 brake lights, wiring adapter for Africa Twin CRF1100L, and dual mounting plates

DENALI codes DNL.B6.003, DNL.WHS.20900, and LAH.DRL.10100

Lighting

Luminous flux

1.740

Six LEDs per pod, twelve in total, dual-circuit running light and brake light

Visibility

Viewing angle

180

Protection

Water resistance

IP67

Assembly

Small plates

On the sides of the original license plate holder

The standard license plate holder remains on the motorcycle: the plates only secure the modules

Compatibility

Model

Honda Africa Twin CRF1100L

Not compatible with the CRF1000L: the brake light connector is different

Composizione e compatibilità dichiarate da DENALI sulla scheda ufficiale.

Due luci freno sull'Africa Twin, 1.740 lumen

Everything you need to know before ordering

Technical specifications, equipment, delivery, and warranty: below you’ll find every detail verified against the official DENALI documentation.

Description B6 plug-and-play dual brake light kit for Honda Africa Twin CRF1100L

Code LAH0111300K — DENALI code LAH.01.11300

The complete brake light setup for the Honda Africa Twin CRF1100L: two B6 pods on either side of the license plate, 1,740 lumens in total, with dedicated mounting plates and the specific wiring adapter already included in the kit.

Two lights spaced apart are easier to judge than a single point: the person following you perceives the motorcycle's width, and therefore its actual distance. Dual circuit — running light at 50%, brake light at 100% — six LEDs per pod, 180-degree viewing angle, IP67 rating.

In the kit: 2× B6 brake light pods (DNLB6003), 1× wiring adapter for Africa Twin (DNLWHS20900) and 1× pair of double mounting plates for B6 modules (LAHDRL10100). The plates secure the modules to either side of the original license plate holder, which remains on the motorcycle.

If one light is enough for you, there is a single-pod version: code LAH0111200K. Note, however, that it replaces the license plate holder, while this one does not.

Declared compatibility: Honda Africa Twin CRF1100L.

Why choose it

Due pod ai lati della targa danno a chi ti segue la larghezza della moto, e quindi la distanza reale: è il motivo per cui le auto hanno due stop e non uno.

Il portatarga originale resta sulla moto: le placchette affiancano i moduli senza sostituire niente.

Who is it recommended for

A chi vuole il massimo di visibilità. Due moduli distanti comunicano la larghezza della moto.

Controlla la sigla del tuo modello. Il cablaggio è per la CRF1100L: sulla CRF1000L il connettore è diverso.

A chi vuole tenere il portatarga originale. A differenza del kit singolo, questo non lo sostituisce.

Complete technical specification sheet
Technical data
  • Flusso luminoso: 1.740 lm sulla coppia
  • LED: 6 per pod, 12 in totale
  • Circuiti: doppio, posizione al 50% e stop al 100%
  • Angolo di visione: 180 gradi per pod
  • Impermeabilità: IP67
  • Montaggio: ai lati del portatarga originale, che resta sulla moto
  • Compatibilità: Honda Africa Twin CRF1100L, non la CRF1000L
Documents and manufacturer

Montando i pod ai lati della targa, verifica che restino rispettate le prescrizioni del codice della strada su posizione e altezza dei dispositivi di segnalazione e sulla leggibilità della targa, che non deve essere coperta.

DENALI riconosce 5 anni di garanzia convenzionale del produttore, che si aggiunge ai 24 mesi di garanzia legale di conformità.

How does it work, in detail?

  • Double brake light on the CRF1100L, original license plate holder in place.
Two light sources are easier to see than one

Two light sources are easier to see than one

Two lights on either side of the license plate give those following you information that a single light cannot: the motorcycle's width, and therefore the actual distance. A total of 1,740 lumens, twelve LEDs, with a 180-degree viewing angle on each side.

The original license plate holder stays in place

The original license plate holder stays in place

Unlike the single kit, nothing is replaced here: the mounting plates position the two modules on either side of the license plate holder you already have. The adapter plugs into the stock brake light connector, so the installation is reversible.

FAQs

For more information, see our FAQ of frequently asked questions.

Is it compatible with the CRF1000L?

No, and it's the most common purchasing mistake with this product. The included adapter, the DNLWHS20900, is designed for the Africa Twin CRF1100L, that is, from 2020 onward. On the previous CRF1000L, the brake light connector is different: write to us and we'll see what can be done.

What exactly is in the box?

Three codes: two B6 brake light pods (DNLB6003), the wiring adapter for the Africa Twin CRF1100L (DNLWHS20900), and the double mounting plates for B6 modules (LAHDRL10100). The plates are module mounting brackets, not a replacement license plate holder.

What’s the difference compared with the single version?

The single LAH0111200K kit contains a license plate holder with the light already integrated and replaces the license plate holder. This leaves the original license plate holder on the motorcycle and adds two modules with the plates, for 1,740 lumens instead of 870.

Didn’t find the answer you were looking for?

Don't hesitate to contact us

Buying guides, technical comparisons, and news about accessories for adventure motorcycles

Before choosing

View all

Borsa serbatoio moto LOBOO montata su un serbatoio, esempio di equipaggiamento per una Honda XL750 Transalp

Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

From 2026, the Honda XL750 Transalp comes with the E-Clutch as standard on both versions, full-power and A2, at the same price of €10,990. Official technical specifications, what really changes, and how to equip it for touring with Endurrad catalog accessories.

Read moreabout Honda XL750 Transalp 2026: E-Clutch becomes standard, here’s what changes

Maxi enduro con numero di gara su una strada bianca dell'Appennino tra boschi autunnali durante il Transitalia Marathon

Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle

From September 25 to October 1, 2026, from Rimini to Termoli in four stages and over 1,000 km: dates, route, Complex, Plain and Road tracks, costs, permitted motorcycles, luggage rules, and a complete checklist for preparing the maxi enduro.

Read moreabout Transitalia Marathon 2026: stages from Rimini to Termoli, rules and how to prepare the motorcycle

Coppia di riser manubrio LOBOO montati su BMW R 1300 GS, finitura anodizzata argento

Motorcycle handlebar risers: which height should you choose for your bike?

Rise or setback? The complete range of LOBOO handlebar risers for BMW GS, KTM, Honda, Triumph, and other adventure bikes: stated measurements, real prices, and the check you should always perform after installation.

Read moreabout Motorcycle handlebar risers: which height should you choose for your bike?