Construction

Estate

Watertight connectors with seals on the body and individual wires

Crimp terminals, crimping tool not included

Equipment

Manufacturer’s warranty

5

In addition to the 24-month statutory conformity warranty

Dati dichiarati da DENALI sulla scheda ufficiale.

Il pezzo singolo per chiudere un cablaggio su misura

Everything you need to know before ordering

Technical specifications, equipment, delivery, and warranty: below you’ll find every detail verified against the official DENALI documentation.

Description 2-way waterproof male connector DNLWHS051

Code DNLWHS051 — DENALI code DNL.WHS.051

Pigtail with a preassembled 2-way sealed male connector: two approximately 7.6 cm long 18 AWG wires extend from the connector and are soldered to the light or accessory wires.

No crimp terminals and no crimping tool: it's the quickest way to connect an accessory to the DENALI wiring harness.

If you prefer the crimp version, the corresponding set is DNLCTRMT02.

Why choose it

Connettore maschio stagno a due vie, venduto singolarmente: serve quando stai realizzando un cablaggio su misura e ti manca un pezzo, o quando devi rifare un connettore danneggiato senza ricomprare il set intero.

I terminali vanno crimpati con una pinza a bugna, venduta a parte.

Complete technical specification sheet
Technical data
  • Tipo: pigtail con connettore maschio stagno MT Series a 2 vie
  • Cavi: preassemblati, circa 7,6 cm, sezione 18 AWG
  • Collegamento: i cavi si saldano all'accessorio, niente terminali da crimpare
  • Serve per: collegare una luce o un accessorio al cablaggio DENALI
  • Nella confezione: 1 pigtail maschio a 2 vie
  • Versione da crimpare: set connettori DNLCTRMT02

How does it work, in detail?

  • The single piece for completing a custom wiring harness.
The cables are already there

The cables are already there

It is not a connector to assemble piece by piece: it is an already assembled pigtail, with two approximately 7.6 cm (18 AWG) wires extending from the connector and soldered to the accessory. No crimp terminals and no crimping tool. If you want the crimp version instead, the set is DNLCTRMT02.

FAQs

For more information, see our FAQ of frequently asked questions.

Do you need a special tool?

Yes, if you want it to last. The terminals must be crimped with a dimple crimper, which closes them evenly around the copper and insulation: a generic crimper deforms them, and the connection loosens with vibration. You’ll find the dedicated crimper in the catalog.

Why not use standard faston connectors?

Because on a motorcycle, the connection is exposed. Water, salt, and vibrations get into the terminal, corrode it, and sooner or later the light starts acting up for no apparent reason. Waterproof connectors have seals around the housing and each individual wire, and stay dry even after pressure washing.

Didn’t find the answer you were looking for?

Don't hesitate to contact us

Buying guides, technical comparisons, and news about accessories for adventure motorcycles

Before choosing

View all

Suzuki V-Strom 800DE con valigie laterali e bauletto in alluminio LOBOO

Suzuki V-Strom 800DE: quali valigie e quale bauletto montare, con telai e prezzi reali

Sulla Suzuki V-Strom 800DE dal 2024 il bagaglio rigido LOBOO si compone con due supporti indipendenti, il telaio laterale JP421B e la piastra JP421W. Configurazioni, litri, prezzi, scorte reali e montaggio a confronto.

Read moreabout Suzuki V-Strom 800DE: quali valigie e quale bauletto montare, con telai e prezzi reali

Manubrio di moto adventure con entrambi i copri manopole LOBOO H80 installati

Heated motorcycle grip covers: Will they fit yours? Size, wiring, and installation of the LOBOO H80

A heated grip cover is not chosen by motorcycle model but by the grip diameter: the LOBOO H80 fits grips from 29 to 35 mm. How to measure, connect to a 12–15 V system, and install without removing the controls.

Read moreabout Heated motorcycle grip covers: Will they fit yours? Size, wiring, and installation of the LOBOO H80

BMW R 1250 GS Adventure con coppia di borse gonfiabili LOBOO Wanderer montate sulle barre paramotore

Accessories for enduro and maxi-enduro motorcycles: the best options, from panniers to inflatable crash bar bags

The accessories that really matter on an enduro or maxi-enduro motorcycle, in order of priority: rear panniers and frames, crash bars, crash bar bags, and inflatable bags explained in detail, with verified manufacturer data, prices, and availability.

Read moreabout Accessories for enduro and maxi-enduro motorcycles: the best options, from panniers to inflatable crash bar bags