• Garagela tua moto e solo gli accessori compatibili
  • −5%Benvenuto nel Garage5% for anyone who saves the motorcycle in the app, until 06/30/2027
  • Cerca con una fotol'app riconosce la tua moto
  • Diario mototagliando, revisione, bollo
  • Avvisaminotifica quando un prodotto torna disponibile
  • −5%Primo ordinefatto dall'app
  • Vedi in 3De sulla tua moto, in realtà aumentata
Scarica su App Store Disponibile su Google Play Download

Free shipping on orders over €100 · 14-day returns

Cavo SAE collegato sotto la sella della moto per ricaricare la batteria senza smontare le careneCavo SAE da 50 cm completo di portafusibile, terminali ad anello e connettore a sgancio rapidoPortafusibile stagno del cavo SAE aperto, con il fusibile a mini lama blu da 15 ATerminali ad anello del cavo SAE fissati ai poli della batteria della motoConnettore SAE lasciato accessibile accanto alla batteria, pronto per il mantenitore di caricaCavo SAE installato su una CFMOTO 800MT, con il connettore instradato lungo la fiancataCavo SAE da 120 cm con portafusibile in linea e terminali ad anello
Pre-ordine
50/120 cm Lengths
15 A Fuse
18 AWG Section
IPX5 Protection

Panoramica

In breve

Permanent Y-Terminal

It is connected to the battery terminals only once, then the SAE connector remains accessible.

No more dismounting

Connect the maintainer, compressor, or USB socket without removing the seat and without touching the terminals.

Integrated 15 A fuse

System protection against downstream short circuits.

Pure copper and IPX5 rating

The connector remains connected even in the rain.

SAE standard

Compatible with LOBOO devices and any accessory with an SAE interface.

Dal produttore LOBOO

Original LOBOO product, a brand specializing in adventure and touring motorcycle accessories. Official manufacturer documentation available upon request.

Leggi la descrizione completa

The SAE cable creates a fixed, protected power connection on your motorcycle battery. The two Y-shaped ring terminals attach to the battery posts once, so the SAE connector remains within easy reach from then on.

Connect a battery maintainer, compressor, USB outlet, or another accessory without removing the seat or touching the terminals every time.

Key features

  • Two lengths: 50 cm for compact wiring, 120 cm when the route from the battery is longer
  • Pure copper core, 18AWG: higher current capacity and greater resistance to flexing
  • Insulating PVC sheath, resistant to high temperatures and aging
  • 15 A mini-blade fuse in line, housed in a waterproof fuse holder with a snap-on cover: replacement fuses are available at any auto parts store
  • IPX5 rating: the male and female connectors have protective caps that keep out water and prevent oxidation when the connector is not in use
  • SAE standard: works with LOBOO accessories and any device with a 12 V SAE interface
  • Plug and play: no configuration required - connect it and it works

Which length to choose

Measure the route from the battery posts to the point where you want the connector to emerge. Under 50 cm, the short version is sufficient; if you need to route it around the frame or reach the other side of the motorcycle, choose the 120 cm version. The two versions are identical in every other respect.

What's included

The cable with fuse and ring terminals, three cable ties for securing the route, and the user manual in eight languages, including Italian.

The limit to observe

The fuse is rated at 15 A, or approximately 180 W at 12 V. It is suitable for maintainers, battery chargers, USB outlets, and compressors. For high-draw lights or multiple devices connected in parallel, a dedicated distribution unit such as the CB10 or CB20 is required.

If you also want to check the battery charge at a glance, a version with a three-color LED indicator, a 16 AWG conductor, and a 10 A capacity is available.

Nella confezione

  • PRODOTTO LOBOO ORIGINALE nuovo, nella confezione prevista dal produttore
  • ACCESSORI DI MONTAGGIO INCLUSI QUANDO PREVISTI nella dotazione originale, con supporti, telai o adattatori venduti separatamente indicati nella descrizione
  • MANUALE DI MONTAGGIO incluso nella confezione
  • COMPATIBILITA VERIFICABILE PRIMA DELL'ACQUISTO, comunicando marca, modello, anno e versione della moto

CSAE-19 and CSAE-19L - pure copper 18 AWG - 15 A fuse - IPX5

How does it work, in detail?

How to install it, what you can connect to it, and how far the fuse reaches: everything explained step by step.

Charging and power from a single point
01

Charging and power from a single point

The cable serves two purposes at once: charging the battery and drawing power for an accessory. Once installed, the SAE connector remains accessible, so you no longer need to remove anything to reach the terminals.

Pure copper core, heat- and aging-resistant sheath, plug-and-play operation.

The Y-terminal is installed only once
02

The Y-terminal is installed only once

The two ring terminals attach to the battery terminals and stay there. The SAE connector, on the other hand, can be disconnected and reconnected by hand, without tools: plug it in and it works immediately.

It’s the difference between installing an accessory once and reconnecting it every time you charge.

Pure 18 AWG copper, flexible and kink-resistant
03

Pure 18 AWG copper, flexible and kink-resistant

The conductor is made of pure copper with an 18AWG cross-section: it carries more current and withstands repeated bending better in a cable that is moved with every connection.

The outer sheath is made of insulating PVC resistant to high temperatures and aging, designed to be positioned near the engine.

The fuse protects everything you connect
04

The fuse protects everything you connect

The fuse holder is inline on the red wire, waterproof, with a snap-on cover that opens without tools. Inside is a blue 15 A mini blade fuse, the same type you can find at any auto parts store.

It protects against overloads and short circuits: if something downstream shorts out, the fuse blows instead of the motorcycle's electrical system.

Protective caps on both ends
05

Protective caps on both ends

Both the male and female connectors have a protective cap. When closed, it keeps water out and prevents contact oxidation and short circuits: this is the basis for the IPX5 rating declared by the manufacturer.

IPX5 means protection against water jets, not immersion: the connection must not be left underwater.

What can you connect to it?
06

What can you connect to it?

Any device with an SAE interface, not just LOBOO. Three devices in the LOBOO range are already available:

  • the smart car and motorcycle battery charger and maintainer
  • the mini motorcycle battery charger
  • the mini tire inflator compressor
The manufacturer's parameter sheet
07

The manufacturer's parameter sheet

LOBOO brand, 18AWG wire gauge, 15 A fuse.

The parameter sheet is shared by the two product codes in the family and lists both lengths: CSAE-19 at 50 cm and CSAE-19L at 120 cm. These are the two variants you choose above, identical in every respect except for the cable length.

Dati dal manuale d'uso LOBOO

Specifiche tecniche

Tutti i dati

Identification

Model
CSAE-19 (50 cm) and CSAE-19L (120 cm)
Official name
SAE quick-connect cable
LOBOO item number
11.52.902 (50 cm) and 11.52.012 (120 cm)
Barcode (EAN)
6973227075455 (50 cm) and 6973227075530 (120 cm)

Electrical data

Operating voltage
12 V
Conductive material
Pure copper
Host section
18AWG
Fuse
15 A, overload and short-circuit protection
Fuse format
15 A mini blade fuse, in a waterproof fuse holder with snap-on cover
Indicative maximum load
Approximately 180 W at 12 V (15 A x 12 V)

Materials and construction

Outer sheath
PVC insulation, resistant to high temperatures and aging
Terminals
Y-ring terminal, for permanent attachment to the battery terminals
Interface
SAE quick-disconnect connector
Protection rating
IPX5, with protective caps on the male and female ends

Measurements

Available lengths
50 cm (CSAE-19) and 120 cm (CSAE-19L)

Equipment

Package contents
1 SAE cable with fuse and ring terminals, 3 cable ties

Compatibility and compliance

Compatibility
LOBOO accessories and any device with a 12 V SAE interface
Compliance
CE marking (EMC and RoHS reports) and FCC SDoC declaration

Specifications declared by the manufacturer LOBOO. If you have any doubts about compatibility with your model, please contact us before purchasing.

Manuale d'uso del cavo SAE CSAE-19 e CSAE-19L in otto lingueDocumento originale LOBOO Scarica ↓

Prima di ordinare

Montaggio e requisiti

Come si monta

  1. Collega i due terminali ad anello ai poli della batteria rispettando la polarita. Il manuale e esplicito: positivo e negativo non vanno invertiti, si danneggia la batteria o l'apparecchio collegato.
  2. Scegli il percorso dei fili e fissa fili e connettore SAE con le tre fascette in dotazione.
  3. Quando ti serve, apri il cappuccio impermeabile del connettore SAE e innesta a fondo il dispositivo: caricabatterie, compressore o altro accessorio SAE.
  4. Finito l'uso, scollega il connettore e richiudi bene il cappuccio impermeabile.
Istruzioni complete e note di sicurezza

Nella confezione: il cavo e tre fascette. Il manuale d'uso e in otto lingue, italiano compreso.

  • Collega i due terminali ad anello ai poli della batteria rispettando la polarita. Il manuale e esplicito: positivo e negativo non vanno invertiti, si danneggia la batteria o l'apparecchio collegato.
  • Scegli il percorso dei fili e fissa fili e connettore SAE con le tre fascette in dotazione.
  • Quando ti serve, apri il cappuccio impermeabile del connettore SAE e innesta a fondo il dispositivo: caricabatterie, compressore o altro accessorio SAE.
  • Finito l'uso, scollega il connettore e richiudi bene il cappuccio impermeabile.

Avvertenze del produttore

  • Tieni il cappuccio impermeabile chiuso ogni volta che il connettore non e in uso.
  • Per staccare il connettore afferra le due estremita della spina: non tirare mai il filo.
  • Non usare prolunghe conduttrici di qualita scadente o fuori specifica.
  • Non usare il cavo se e danneggiato.

Il manuale non indica una coppia di serraggio per i morsetti batteria: usa quella prescritta dal costruttore della moto.

Installation and safety

  • Attach the ring terminals to the battery poles, observing polarity, and check that they are tight.
  • Route the cable away from hot or moving parts and secure the connector in a sheltered but accessible spot.
  • Do not exceed the 15 A fuse: check the declared current draw of the connected accessories.
  • The IPX5 rating applies to the connector: do not immerse the connection in water.

It's the first accessory to install if:

  • You use a battery maintainer and have to remove the seat every time
  • You want a stable power source for a compressor, USB socket, or spotlights
  • You already have devices with a SAE connector and need to connect them to the battery

Limit to observe:The fuse is 15 A. For high-draw spotlights or multiple devices in parallel, a dedicated distribution unit, such as the CB10 or CB20, is required.

Compatibilità

Hai un dubbio sulla compatibilità?Mandaci una foto su WhatsApp: ti rispondiamo noi. Scrivici →

Domande frequenti

Le domande che ci fate più spesso

What exactly is this cable used for?

Create a fixed, protected connection point on the battery with a standard SAE connector. From there, you can connect chargers, maintainers, compressors, USB outlets, or spotlights without having to remove the seat and terminals each time.

What length should I choose?

Measure the route from the battery terminals to the point where you want the connector to emerge. Under 50 cm, the short version (CSAE-19) is sufficient; if you need to route it around the frame or reach under the seat from the opposite side, choose the 120 cm version (CSAE-19L).

The two versions are identical in every other respect: the same 18 AWG copper wire, the same 15 A fuse, the same IPX5 connector, and the same manual.

Is a 15 A fuse sufficient for my accessories?

15 A at 12 V is approximately 180 W, covering chargers, maintainers, USB outlets, and compressors. For high-consumption spotlights or multiple devices in parallel, add up the specified currents: if they exceed 15 A, a dedicated distribution unit, such as the CB10 or CB20, is required.

If the fuse blows, which one should I buy?

A 15 A mini blade fuse, the blue one, in the standard size you can find at any auto parts store. The fuse holder opens by hand by lifting the snap-on cover, with no tools and without disconnecting the cable.

How is it mounted on the battery?

The two ring terminals fit over the battery posts beneath the original nuts, observing polarity: red to positive, black to negative. Then route the cable away from hot or moving parts and secure the connector in a protected but accessible location with the seat installed.

For the terminal tightening torque, refer to your motorcycle’s manual: LOBOO does not specify its own.

Can I leave it on the motorcycle in the rain?

Yes, it is designed to remain installed. The stated rating is IPX5, meaning protection against water jets, and it is achieved with the caps that seal the male and female ends when they are not in use. It is not an immersion rating: the connector must not be left underwater.

Avvisami quando disponibile

Ti scriviamo appena SAE Cable for Motorcycle Battery 50 or 120 cm - Ring Terminals, 15 A Fuse (50 cm) torna disponibile.