Features

What does it do

Powers two T3 pods with a dedicated switch

Standalone solution for those without a CANsmart control unit

Construction

Components

Low-profile watertight connectors and printed cable

Fully sealed switch, designed for use on off-road vehicles

Equipment

Package contents

Complete wiring harness with waterproof switch and instructions

Manufacturer’s warranty

5

In addition to the 24-month statutory conformity warranty

Dati dichiarati da DENALI sulla scheda ufficiale.

Alimenta e comanda una coppia di pod T3 senza centralina

Everything you need to know before ordering

Technical specifications, equipment, delivery, and warranty: below you’ll find every detail verified against the official DENALI documentation.

Description Wiring harness with sealed switch for T3 indicators

Code DNLWHS13500 — DENALI code DNL.WHS.13500

Complete wiring harness with a weatherproof switch for powering and controlling one pair of T3 pods on a motorcycle without a CANsmart control unit.

Low-profile weatherproof connectors and molded cable keep moisture out; the switch is fully sealed and designed to withstand the operating conditions of off-road vehicles.

If you already have a CANsmart GEN II, this wiring harness is not required: the T3 pods connect using the dedicated adapter and are controlled via the motorcycle’s original buttons.

Why choose it

È la via autonoma per far funzionare una coppia di pod T3 su una moto senza centralina: cablaggio completo più interruttore dedicato, senza dipendere dall'elettronica della moto.

  • Progettato per alimentare due pod T3.
  • Interruttore completamente sigillato, nato per il fuoristrada.
  • Connettori stagni a basso profilo e cavo stampato.
  • Nessuna centralina richiesta.
Who is it recommended for

A chi monta i pod T3 su una moto per cui non esiste una centralina CANsmart, o a chi preferisce comandarli da un interruttore proprio invece che dai pulsanti originali.

Se hai già un CANsmart GEN II questo cablaggio non ti serve: i pod T3 si collegano con l'adattatore dedicato e si comandano dai comandi di serie della moto.

Complete technical specification sheet
Technical data
  • Tipo: cablaggio con interruttore per indicatori T3
  • Alimenta: due pod T3 DENALI
  • Interruttore: stagno, acceso e spento
  • Connettori: stagni a basso profilo, cavo stampato
  • Serve per: moto senza centralina CANsmart
  • Non serve se: hai un CANsmart GEN II, dove i T3 si collegano con l'adattatore dedicato
Documents and manufacturer

Se i pod T3 vengono usati come indicatori di direzione in sostituzione degli originali, valgono le regole del codice della strada su posizione, distanza e altezza da terra, e servono le resistenze antilampeggio.

DENALI riconosce 5 anni di garanzia convenzionale del produttore, che si aggiunge ai 24 mesi di garanzia legale di conformità.

How does it work, in detail?

  • Powers and controls a pair of T3 pods without a control unit.
For those who do not have the CANsmart

For those who do not have the CANsmart

This is how to run a pair of T3 pods on a motorcycle without a control unit: the wiring supplies power, and the switch turns them on and off. If you already have the CANsmart, you don't need this - the T3 pods connect with the dedicated adapter and are controlled by the motorcycle's original buttons.

A switch made to stay outdoors

A switch made to stay outdoors

The switch is completely sealed, designed from the ground up for use on off-road vehicles. Low-profile waterproof connectors and molded cable complete the job: moisture stays out of the system instead of traveling up the wires.

FAQs

For more information, see our FAQ of frequently asked questions.

Is it also needed if I have a CANsmart controller?

No. This wiring is the standalone solution, with a dedicated switch, for those who do not have a control unit. If you have a CANsmart GEN II, the T3 pods are instead connected using the dedicated adapter and controlled via the motorcycle’s original buttons.

How many pods can it power?

It is designed for two T3 pods, so one pair: front or rear. If you install four, you need two wiring harnesses, or a CANsmart controller with its adapter.

Didn’t find the answer you were looking for?

Don't hesitate to contact us

Buying guides, technical comparisons, and news about accessories for adventure motorcycles

Before choosing

View all

Suzuki V-Strom 800DE con valigie laterali e bauletto in alluminio LOBOO

Suzuki V-Strom 800DE: quali valigie e quale bauletto montare, con telai e prezzi reali

Sulla Suzuki V-Strom 800DE dal 2024 il bagaglio rigido LOBOO si compone con due supporti indipendenti, il telaio laterale JP421B e la piastra JP421W. Configurazioni, litri, prezzi, scorte reali e montaggio a confronto.

Read moreabout Suzuki V-Strom 800DE: quali valigie e quale bauletto montare, con telai e prezzi reali

Manubrio di moto adventure con entrambi i copri manopole LOBOO H80 installati

Heated motorcycle grip covers: Will they fit yours? Size, wiring, and installation of the LOBOO H80

A heated grip cover is not chosen by motorcycle model but by the grip diameter: the LOBOO H80 fits grips from 29 to 35 mm. How to measure, connect to a 12–15 V system, and install without removing the controls.

Read moreabout Heated motorcycle grip covers: Will they fit yours? Size, wiring, and installation of the LOBOO H80

BMW R 1250 GS Adventure con coppia di borse gonfiabili LOBOO Wanderer montate sulle barre paramotore

Accessories for enduro and maxi-enduro motorcycles: the best options, from panniers to inflatable crash bar bags

The accessories that really matter on an enduro or maxi-enduro motorcycle, in order of priority: rear panniers and frames, crash bars, crash bar bags, and inflatable bags explained in detail, with verified manufacturer data, prices, and availability.

Read moreabout Accessories for enduro and maxi-enduro motorcycles: the best options, from panniers to inflatable crash bar bags