{"product_id":"telai-valigie-laterali-cfmoto-450mt","title":"Side Case Racks for CFMOTO 450MT | PIKE TRACKER","description":"\u003cp\u003ePair of \u003cstrong\u003eside case racks\u003c\/strong\u003e for the \u003cstrong\u003eCFMOTO 450MT\u003c\/strong\u003e from 2024 onward, the motorcycle LOBOO identifies in the installation manual. This is the structure onto which the side cases attach: the cases are not included.\u003c\/p\u003e\n\u003cp\u003eLOBOO calls it the \u003cem\u003eSide Case Rack\u003c\/em\u003e, code JP591B, PIKE TRACKER series. With the aluminum cases, the pair is 35 liters on the left and 30 liters on the right, because the right case is shaped to clear the exhaust.\u003c\/p\u003e\n\u003ch2\u003eWhat you can mount on these racks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePIKE TRACKER aluminum cases\u003c\/strong\u003e P35L + P30R, in matte black or glossy silver: find them on the \u003ca href=\"\/en\/products\/valigie-in-alluminio-loboo-pike-tracker\"\u003ePIKE TRACKER aluminum cases\u003c\/a\u003e page.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWANDERER semi-rigid bags\u003c\/strong\u003e: LOBOO states that the JP591B is compatible with WANDERER side bags. Find them on the \u003ca href=\"\/en\/products\/valigie-semirigide-wanderer\"\u003eWANDERER semi-rigid cases\u003c\/a\u003e page.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eALPS inflatable bags\u003c\/strong\u003e of 23 and 30 liters, with mounts and keyed anti-theft system: find them on the \u003ca href=\"\/en\/products\/valigie-laterali-gonfiabili-moto-alps\"\u003eALPS inflatable cases\u003c\/a\u003e page.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLOBOO aluminum cases can only be mounted on LOBOO racks. The reverse also applies: hard cases from other manufacturers do not fit these racks.\u003c\/p\u003e\n\u003ch2\u003eWill they fit the 800MT or 800MT-X?\u003c\/h2\u003e\n\u003cp\u003eNo. The JP591B manual only lists the 450MT from 2024 onward. Dedicated listings are available for the other CFMOTO models: \u003ca href=\"\/en\/products\/telai-valigie-laterali-cfmoto-800-mt\"\u003eside case racks for the CFMOTO 800MT\u003c\/a\u003e and \u003ca href=\"\/en\/products\/telai-valigie-laterali-cfmoto-800mt-x\"\u003eside case racks for the CFMOTO 800MT-X\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cp\u003eThe manual lists 11 items: left and right racks, a connecting bar, four Ø 20 × Ø 8.5 mm spacers (two 45 mm high and two 42 mm high), one Ø 25 × Ø 8.5 × 4 mm spacer, 2 M8 × 20 screws, 2 M8 × 60 screws, 2 M8 × 65 screws, 6 M8 washers, and threadlocker.\u003c\/p\u003e\n\u003ch2\u003eHow to install them\u003c\/h2\u003e\n\u003cp\u003eTwo stages. In the first, remove three original screws, two on the left and one on the right near the exhaust, and install the racks: at the top, use the M8 × 60 and M8 × 65 screws, the 45 and 42 mm spacers, and the washers; at the bottom, use the motorcycle's original screws, with the 4 mm spacer on the left. In the second stage, install the connecting bar at the rear using the two M8 × 20 screws and the washers. The manufacturer does not require drilling.\u003c\/p\u003e\n\u003cp\u003eThe kit screws must be tightened to \u003cstrong\u003e20 N·m\u003c\/strong\u003e. The rack hooks, which receive the cases, must be adjusted to the correct position and secured with threadlocker at \u003cstrong\u003e12 N·m\u003c\/strong\u003e. LOBOO asks you not to fully tighten everything immediately: first put all the parts in position, then apply threadlocker and tighten to the specified torque.\u003c\/p\u003e\n\u003ch2\u003eRacks and cases in a single order\u003c\/h2\u003e\n\u003cp\u003eIf you want the racks and PIKE TRACKER cases together, there is the \u003ca href=\"\/en\/products\/valigie-laterali-cfmoto-450mt\"\u003eside case kit for the CFMOTO 450MT\u003c\/a\u003e, available in black or silver.\u003c\/p\u003e\n\u003ch2\u003eTop case and three-case system\u003c\/h2\u003e\n\u003cp\u003eFor a top case on the 450MT, LOBOO provides the \u003ca href=\"\/en\/products\/portapacchi-bauletto-cfmoto-800mt-x-800mt-450mt\"\u003eJP601W luggage rack with top case plate\u003c\/a\u003e, sold separately, which accommodates the \u003ca href=\"\/en\/products\/top-case-alluminio-pike-tracker-loboo\"\u003ePIKE TRACKER aluminum top cases\u003c\/a\u003e in 36- or 45-liter versions.\u003c\/p\u003e\n\u003cp\u003eLOBOO describes the JP591B as a stainless steel structure. The weight and maximum load of the racks are not stated, so we do not provide them. All other \u003ca href=\"\/en\/collections\/accessori-cfmoto-450mt\"\u003eaccessories for the CFMOTO 450MT\u003c\/a\u003e are in the dedicated collection.\u003c\/p\u003e","brand":"LOBOO","offers":[{"title":"Default Title","offer_id":58695909179736,"sku":"JP591B","price":261.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/telai-laterali-valigie-cfmoto-450mt-loboo-jp591b.png?v=1791450359","url":"https:\/\/endurrad.com\/en\/products\/telai-valigie-laterali-cfmoto-450mt","provider":"Endurrad®","version":"1.0","type":"link"}