{"product_id":"kit-paramani-barkbusters-yamaha-xsr125-bhg-142","title":"Barkbusters BHG-142 handguard mounting kit for Yamaha XSR125 from 2023","description":"\u003cp\u003eThe \u003cstrong\u003eBHG-142\u003c\/strong\u003e is the Barkbusters mounting structure designed around the handlebar geometry of the \u003cstrong\u003eYamaha XSR125 from 2023 onward\u003c\/strong\u003e. It is a \u003cstrong\u003etwo-point mounting kit\u003c\/strong\u003e: the aluminum bar anchors to the handlebar end and to a clamp on the straight section, forming a continuous loop around the hand.\u003c\/p\u003e\n\u003cp\u003eOn a 125 that spends its life in the city, the risk is not off-roading. It is tight parking spaces, tipping over while stationary, and a car's mirror in traffic. These ordinary situations can cost you a lever and leave the bike out of action, while an aluminum structure takes the impact instead of the controls. Then there's the wind: on a naked bike without a fairing, with the plastics installed, you can feel the difference from November onward.\u003c\/p\u003e\n\u003cp\u003eKnow this before ordering: \u003cstrong\u003ethe protective plastics are not included\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-point mounting:\u003c\/strong\u003e the configuration specified by the manufacturer for \u003cem\u003eimpact protection\u003c\/em\u003e. The single-point setup is stated to be for wind and weather protection only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat-treated aluminum bar:\u003c\/strong\u003e the treatment increases strength without adding weight to the structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural aluminum finish\u003c\/strong\u003e, code NP, matching the XSR's retro styling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour compatible plastic series:\u003c\/strong\u003e JET, VPS, STORM and CARBON, interchangeable on the same structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Australia\u003c\/strong\u003e by Rideworx Pty Ltd, which has been designing handguards since 1984.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eXSR125\u003c\/td\u003e\n\u003ctd\u003efrom 2023\u003c\/td\u003e\n\u003ctd\u003eBHG-142-NP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eTake care if you have another Yamaha 125.\u003c\/strong\u003e The manufacturer specifies this code \u003cem\u003eonly\u003c\/em\u003e for the XSR125: the MT-125 and R125 have different handlebars and are not covered by the stated compatibility. If you have one of these models, \u003ca href=\"\/en\/pages\/contatti\"\u003ewrite to us\u003c\/a\u003e with the model and year: if a suitable code exists, we'll point you to it; otherwise, we'll tell you.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer states an \u003cstrong\u003eopen-ended\u003c\/strong\u003e range, with no final year. Compatibility applies to the motorcycle in its \u003cstrong\u003eoriginal factory configuration\u003c\/strong\u003e: if you have an aftermarket handlebar, verify the mounting before purchasing.\u003c\/p\u003e\n\u003ch2\u003eProtection and use\u003c\/h2\u003e\n\u003cp\u003eThe wraparound structure protects the brake lever, clutch lever and switchgear: it withstands the impact and distributes it across the aluminum instead of leaving it to the lever. The plastics determine the rest: \u003cstrong\u003eJET\u003c\/strong\u003e has the most compact profile and remains the most discreet option on a retro-style motorcycle, \u003cstrong\u003eVPS\u003c\/strong\u003e has a two-position adjustable deflector that can be removed in just a few minutes, \u003cstrong\u003eSTORM\u003c\/strong\u003e provides more coverage and is the choice for winter, while \u003cstrong\u003eCARBON\u003c\/strong\u003e is made of carbon fiber.\u003c\/p\u003e\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eHeat-treated aluminum bar, dedicated clamps and hardware. The manufacturer does not state weight and dimensions numerically, and we do not estimate them. \u003cstrong\u003eWe won't make claims about the handlebar weights:\u003c\/strong\u003e the summary documentation does not specify them for this code, and the complete parts list is in the official instructions attached to the product page.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eCheck that you have an XSR125 from 2023 onward, with the original handlebar.\u003c\/li\u003e\n\u003cli\u003eClear the handlebar end of anything fitted as standard.\u003c\/li\u003e\n\u003cli\u003eFit the clamp to the straight section of the handlebar, in front of the controls, without fully tightening it.\u003c\/li\u003e\n\u003cli\u003eAttach the aluminum bar to the handlebar end and the clamp, then position it.\u003c\/li\u003e\n\u003cli\u003eIf you have chosen the plastics, install them, align everything and tighten to the manufacturer's specified torque settings.\u003c\/li\u003e\n\u003cli\u003eCheck the throttle, front brake and clutch, and make sure the steering turns freely from lock to lock, then check the tightening again after the first 50 km.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe tightening torques and complete sequence are in the official INS-BHG-142-NP instructions, attached to this product page and supplied with the kit. The manufacturer considers handguard installation a safety-critical procedure, to be entrusted to a technician if you are not experienced with this work.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo heat-treated aluminum bars, natural finish\u003c\/li\u003e\n\u003cli\u003eComplete clamps and hardware\u003c\/li\u003e\n\u003cli\u003eINS-BHG-142-NP installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat is NOT included\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe protective plastics\u003c\/strong\u003e, which must be ordered separately: \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-jet-003\"\u003eJET-003\u003c\/a\u003e, \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-vps-203\"\u003eVPS-203\u003c\/a\u003e, \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-storm-stm-003\"\u003eSTORM STM-003\u003c\/a\u003e or \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-carbon-bcf-003\"\u003eCARBON BCF-003\u003c\/a\u003e. EGO plastics are not compatible with this structure.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Barkbusters\u003c\/h2\u003e\n\u003cp\u003eBarkbusters is a Rideworx Pty Ltd brand, an Australian company that has been producing handguards since 1984. On the XSR125, it brings the same system used on large adventure enduro bikes: a structure designed for the specific motorcycle and interchangeable plastics that can be chosen separately. If you change motorcycles one day, you change the hardware kit, not the idea.\u003c\/p\u003e\n\u003ch2\u003eWhy buy it from Endurrad\u003c\/h2\u003e\n\u003cp\u003eAt Endurrad, you'll find the \u003ca href=\"\/en\/collections\/barkbusters\"\u003eBarkbusters range\u003c\/a\u003e with compatibility verified against the manufacturer's official documentation, code by code, and the instructions attached to the product page so you can read them before buying. Free shipping in Italy over €100, 14-day returns, 1-year warranty. See all \u003ca href=\"\/en\/collections\/accessori-yamaha\"\u003eYamaha accessories\u003c\/a\u003e too.\u003c\/p\u003e","brand":"BARKBUSTERS","offers":[{"title":"Two-point, aluminum","offer_id":56617439297880,"sku":"BR-BHG-142-00-NP","price":136.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/kit-montaggio-paramani-due-punti-di-fissaggio-yamaha-xsr-125-2023-3745951.jpg?v=1769900069","url":"https:\/\/endurrad.com\/en\/products\/kit-paramani-barkbusters-yamaha-xsr125-bhg-142","provider":"Endurrad®","version":"1.0","type":"link"}